Temperature Sensors Dealers in Naraina, Delhi

• Type: Temperature Sensors
• Application: Temperature Scaling
• Color: Black, Brown, Dark Brown, Grey, White
• Voltage: 0-15VDC, 15-30VDC
• Power: 0-5W, 5-10W
• Driven Type: Electric
• Feature: Reservoirs Hoppers, Safety Interlocks, Solids In Storage Tanks, Suitable For Sensing Level
• Warranty: 1yrs

• Voltage: 220 V AC
• Accuracy: +/- 2 Deg F
• Brand Name: Schneider
• Temperature Range: -100 to 500 Deg F
• Operating Pressure: 250 PSI

• Feature: Humidity measurement accuracy: 5.0%RH. Temperature measuring range: 0 +50 .

The DHT11 sensor is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is: you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.

• Measurement Range: -50 to 70 C
• Measurement Uncertainty: 0.1 C (from 0 to 70 C) (ST-100) 0.2 C (from -25 to 0 C) 0.4 C (from -50 to -25 C) 0.2 C (from 0 to
• Measurement Repeatability: : < 0.05 C

The thermistor temperature sensor is a small thermistor enclosed in a weatherproof housing. It is suitable for measuring air and soil temperatures with a datalogger. The fine-wire thermistor is ideally suited for taking measurements of surfaces or small samples where even a narrow field of view infrared radiometer may not be suitable due to the integration over its conical field of view. The small size also provides a more rapid response to changes in temperature than larger sensors. The sensor is rugged and can be repeatedly pushed into plant tissues with tweezers. The wires are flexible and less sensitive to breakage than similarly-sized fine wire thermocouples.

• Temperature Range: Up to 300 C
• Material: Brass or Stainless Steel
• Brand Name: Hydmark

• Feature: Operating distance : 0 to 2mm , Supply voltage range 10 to 30 VDC

The Model DRS-020 Eddy current digital reference sensor is a self-contained, non-contact position sensor. Not only do they not contain parts prone to mechanical wear, but they are also virtually insensitive to environmental influences. Eddy current proximity switches react only to metal parts, which is an advantage in many cases (insensitivity to dirt). When a conductive, generally metallic, object enters into the magnetic field generated by the sensor, the latter is influenced in a way that it can be detected and evaluated by the built-in electronics. The DRS-020 includes an extension cable, a metallic target and a package of glue.

dental digital sensor, Dental Chair Aura, Dental Compressor

Pneumatic Fitting, Relays, sensor, servo motor drive, Solenoid Valve

Counters, Thermocouple Wire, Scanners, pid controllers

Scanners, Digital Temperature Controllers, sensor accessories