Textile Machine Dealers in Kirti Nagar, Delhi (108 products available)

• Brand Name: Konica Minolta
• Automation Grade: Automatic
• Minimum Order Quantity: 1 Piece

jogson yarn conditioning / heat setting machine is designed with an objective to restore natural properties of yarns i.e. To improve elasticity & strength, regaining moisture level, improving hydrophilic properties, removing snarling & curling effects, twist setting. This dual purpose machine is ideal to treat all natural and synthetic yarns i.e. Cotton, viscose, lycra, blends, wool, polyester, nylon, acrylic and silk in the form of cone, loose fiber, hanks, muffs, tops, narrow fabrics, etc. It is offered with various types of yarn carrier trolley like : creel type trolley to carry cones, bobbins, trolley with hangers for loose yarn, hanks, socks and cage type trolley for loose fiber, hand gloves, etc. Automatic platform for loading / unloading of yarn carrier trolley is also provided upon customer’s request. process control the entire process of conditioning starts from material loading, locking of front door then vacuum is first created upto 740 mm hg by water ring vacuum pump to remove the air & impurities from the yarn. This improves penetration by steam & lack of o2 prevents oxidation. Dry steam is then injected in the machine along its entire length ensuring an even distribution of temperature. Vacuum is recreated to remove excess moisture from the yarn. External steam heating of the machine through limpet coil ensures no steam condensation which also helps to maintain the temperature. When cooling is required for the machine, same limpet coil can work with water. Multiple vacuum, steam & water cooling cycle are possible by linking two or more programs.   features machine body & all parts in contact with the yarn are made of aisi-ss 304, highly corrosion resistant insulated external with mineral wool to maintain vacuum pressure which helps in producing cold saturated steam at low temperature low temperature yarn conditioning from 45oc and heat setting upto 120°c maintenance free mono block vacuum pump, ensures upto 95% vacuum gain direct & indirect heating jacket cooling pneumatic operated door lock / unlock with safety interlock as per international standard variable loading provided with condensation protection sheet to avoid water droplet on the yarn installed with pressure switch to release the excess pressure through pressure release valve installation at floor level, saves space and requires min. Civil work control panel with jogson programmer tpr-33 or plc based touch panel programmer   technical data maximum design pressure 5 bar maximum design temperature 130°c heating gradient 25°c - 130°c approx at 5°c /min. (dry saturated steam pressure at 7 bar) average steam consumption per kg. Of yarn 0.25-0.50 kg. At 7 kg./cm² water consumption (during the vacuum pump operation) at 1 bar is upto 15 ltrs/min. compressed air requirement 6-7 kg./cm² advantages twist setting, shrinkage set of yarn reduction in snarling improved dye fixation & affinity improved weaving & knitting performance, fewer needle breaks higher elongation & strength of yarn free from electrostatic charges easy to operate, low maintenance cost and energy efficient

Machine made fancy tapes in different colours or mono chrome, all done with precision and finesse. Our unmatched quality is customizable according to the buyer's needs.  

• Brand Name: Swift Pack
• Feeding Size: 60
• Reel printing Size (mm): 56
• Printing interface: USB
• Print speed (m): 60.150
• Machine power (w): 72
• Adapter specs.: AC 100V- 240 V , Frequency 50/60 Hz, 1.8 A
• Weight (Kg.): 6
• Packaging Weight (Kg.): 6.5

High Temperature High Pressure Beaker Dyeing Machine : Why Beaker Dyeing Machines?The Dyer must exactly know the quality of dyeing he may expect to have on his production machine. The cost of dyes, cloth and labor is too high to permit any experimentation with the Production Machines. The Dyer also wants to experiments with various combinations of recipes to get shades above the ordinary.   Why LABIN Beaker Dyeing Machines? The Dyer wants to transfer the experimental results directly on the Production Machines without any adjustment and this is where LABIN Machines become more important. Our Machines are characterized by their ability to exactly do that. The critical test is to put the same recipe in all the Beakers of the Machine and after dyeing to check up whether the shades in all the beakers are identical. LABIN Machines are sure to pass this test without a shade of doubt. While designing the Beaker Dyeing Machines, we have assumed that in laboratories there are no maintenance personnel and hence the Machines should work with practically no maintenance. Also important point is that high temperature can only be achieved by use of pressure either in dye pot or vessel. Construction: All the Dyeing pots are made from stainless steel 316 and rest of the equipment from stainless steel 304. The Machine is complete with their own stand. Only outer body panel and stand are made from mild steel.

• Maximum Temperature: 135°C
• Electrical Heating Power: from 6 KW to 18 KW
• Time Controller: Digital Control Timer

The Dyer must exactly know the quality of dyeing he may expect to have on his production machine. The cost of dyes, cloth and labour is too high to permit any experimentation with the Production Machines. The Dyer also wants to experiments with various combinations of receipes to get shades above the ordinary.

•  Model:  SP – ID RP
• Feeding Size: 60
• Reel printing Size (mm): 56
• Printing interface: USB
• Print speed (m): 60.150
• Machine power (w): 72
• Adapter specs.: AC 100V- 240 V Frequency 50/60 Hz, 1.8 A
• Weight (Kg.): 6
• Packaging Weight (Kg.): 6.5

• Voltage: 240 V
• Brand Name: Meditek
• Object To Be Printed: T- Shirt, Fabric etc.
• Automation Grade: Semi Automatic
• Capacity: 600 - 800 Piece Per Hours
• Power Source: Pneumatic

It is electrically operated and is used to check the physical impurities. It is basically vertical type, limit switches are incorporated for both the directions so as to limit the traveling range . The accuracy of the machine is within permissible limit as per is: 1828 load elongation recorder can also be provided on request.

• Brand Name: CI
• Capacity: 100-120 (Pieces per hour)
• Voltage: 11 KVA
• Type Of Bag: Carry Bag
• Bag Material: Cotton
• Carry Bag Material: Non-Woven Fabric Bag
• Size: 1-100 MM, 400-500 MM

• Type: T-shirt Printer
• Application: T-shirt Printing
• Color: Black, Brown
• Voltage: 110V, 220V, 380V
• Power: 1-3kw, 3-6kw
• Driven Type: Electric

• Automation Grade: Semi Automatic,Fully Automatic,Manual,Automatic
• Driven Type: Electric,Hydraulic,Pneumatic
• Voltage: 380V,440V,540V
• Condition: New,Used,Old
• Application: Knitting
• Colour: Green,Blue,Pink,Grey,Silver,Orange

SMDY ENERGY SAVING The consumption of water, chemicals, electrical energy, thermal energy and the wasted water are important cost factors in every dye house. With this machine all these factors are dramatically reduced, measured and controlled. Right-first-time in dyeing is now assured by lower differences inside-outside the packages, while savings of electric energy, water, chemicals, steam and compressed air will bring extremely fast payback times over the initial investment cost. New SMDY sizes are from 5 kg to 1500 kg. This machine with this particular pump and inversion group allows to treat polyester textured high density till 0,5 Kg/l as well as very soft material like silk 0,3 kg/l density in order to process every kind of material you can have in your dye house. In particular can dye bobbin 1.8 kg cotton, 2,4 kg acrylic, polyester 4 kg or 10 kg tops or muffs, tow, flock or beams   Main advantages are: Possibility to dye with liquor ratio from 1:3.5 using in to out single circulation with material not fully covered. Reduce consumption of chemicals, dyes, water and steam due to low liquor ratio facility. Reduce power consumption of main pump because pipes are designed to avoid losses of pressure so that main pump is exploited in the best way. High efficiency motor and inverter reduces power consumption as well. Possibility to dye also in traditional way: air pad, material fully covered and flow circulation in to out and out to in directions.     Yarn dyeing, reinvented! 70% savings on electric energy 30% savings on water, chemicals and utilities Improved yarn dyeing quality Faster payback times Sustainable yarn dyeing This is our new SMDY yarn dyeing machine! Yarn dyeing, reinvented! 70% savings on electric energy 30% savings on water, chemicals and utilities Improved yarn dyeing quality Faster payback times Sustainable yarn dyeing. SMDY FEATURES: • Standard design and manufacturing features:• Nominal loading capacities from 5 to 1500 kg. • Pressure rating of 5.0 kg/cm2, up to 160°C tempera-ture, temperature lock at 140C.• Construction in AISI 316 stainless steel, for all thepart in contact with dyeing liquor.• Water protected motors (IEC Standards I).• Waterproof electrical equipment • Three-level safety systems..• Heat exchangers rated for 15.0 kg/cm2 operatingpressure.• Heating gradient 5°C./minute (range 20-80°C steampressure 6.0 kg/cm2) Cooling gradient 3°C./minute(range 130-108°C water temp. 15°C, pressure 1.5kg/cm2).• Pneumatic lid lifting and lowering.• Rapid lid locking system.      

• SPECIFICATIONS: Plant Model
• Z-40: Z-50
• Main Extruder Screw Dia: 40 mm
• 50 mm: Jockey Extruder Screw Dia
• 20 mm: 25 mm
• L/D Ratio: 24 : 1
• 24 : 1: Max. Extrusion Output
• 20 Kgs./Hr.: 30 Kgs./Hr.
• Lay Flat Width: 50mm � 300 mm
• 100mm � 450 mm: Thickness Range
• 20-60 microns: 20-90 microns
• Main Drive: 3.75 KW
• 5 KW: Total Connected Load
• 18 KW: 22 KW
• Machine Dimensions (Mts.): L4.5 x W2.5 x H4.5

• Type: Fusing Machines
• Certification: CE Certified
• Color: White
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw, 3-6kw, 6-9kw
• Warranty: 1year
• Weight: 100-200kg
• Application: Garment Fusing, Indusrtial Use

Available In Size 1522, 18221535, 1836 And 1838 And Any Specific Size Can Be Made As Per Your Requirement. Available In Automatic, Manual And Belt Type All With Imported Low Consumption Heaters

• Machine width: 1300 mm
• Output: 30-250kg/h
• General power: 7kw-9.2kw

• Type: Poly Printing Machine
• Weight: 100-500kg, 1000-2000kg, 2000-4000kg, 500-1000kg
• Color: Black, Blue, Brown, Grey, Red
• Voltage: 110V, 220V, 230V, 380V, 440V
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-5kw, 10-15kw, 15-20kw, 20-25kw, 5-10kw
• Power: 1-5kw, 10-15kw, 15-20kw, 20-25kw, 5-10kw
• Driven Type: Electric, Hydraulic, Penaumatic
• Warrenty: 1 Year, 2 Years

Brand Printing machine for Under Garments, Brand Printing Machines

• Color: Multicolor
• Technics: Washed
• Pattern: Printed
• Thickness: 1-5mm
• Feature: Easily Washable, Impeccable Finish
• Fabric: Cotton

• Brand Name: Mohindra Mechanical Works
• Place Of Origin: Delhi
• No. Of Colors: 1 to 8
• Web Width: 500mm to 2050mm (20” to 80”)
• Range Of Cylindeer Circumference: 250mm – 1270mm (10” to 50”)
• Printing Speed: 80 mtr per min (variable as per no. Of colours of machine)
• Material can be Printed: hm, ld, nonwoven, lldpe, paper polyester film, foil etc

Technical specifications:- no. Of colours : 1 to 8 web width : 500mm to 2050mm (20” to 80”) unwind rewind reel dia : 1000mm (40”) unwind rewind core id : 76mm and 152mm range of cylindeer circumference : 250mm – 1270mm (10” to 50”) printing speed : 80 mtr per min (variable as per no. Of colours of machine) power requirement : 4 colour machine: - 16 kw. 6 colour machine: - 20 kw. 8 colour machine:-24 kw. Floor space length : variable as per the machine material that can be printed : hm, ld, nonwoven, lldpe, paper polyester film, foil etc available models:- 2,4,6,and 8 colours web width :- 500mm to 2050m reverse printing arrangement top drying hood system and intermediate drying between units heavy duty cast iron body (vibration free) low friction dynamically balance guide rools. Wed roller alluminium rollers & sheet rollers

• Brand Name: Hylite
• Material: Blue GreenPolyamide

We have a good rapport with the prominent e-commerce merchants who provide us a secure payment gateway. With this, we guarantee instant and hassle free transactions. Since inception, we are serving divisive demands of the buyers by making available plentiful array of terry towels in the domestic market. Our terry bath towel absorbs maximum water, gets dry quickly and gentle on the sensitive skin. 

The Fusing Machine offered by us, is an important part of the Coin Packing Machine Range offered by us. Our Fusing Machine has wear resistant spares that guarantee glitch and trouble free operations. SpecificationsDimension : 50 x 20 x 10cm.Weight : 7.50 KGMax Fusing Width : 320mmOperating Temperature : 0-200 Degree

• Features: Longer shelf life , Colored options, Highly effective.

MAT MACHINE, forging lubricants, Forging Crane Wheels, Forging Accessories

• Brand Name: DRODI
• Voltage: 220
• Automatic Grade: Semi-Automatic
• Condition: New
• Warranty: 6 Months
• Dimension: 16" x 24"
• Power: 4 KW
• Model Number: DR-FM2
• Product Type: Semi Automatic
• Power Consumption: 2 KW
• Fusing Time Adjustable: 0 - 100 sec
• Max Temperature: 250 degree Celsius
• Production Capacity: 10
• Material: Textile
• Heating Time: 100 sec
• Pressure Adjustable: Yes
• Number Of Phase: 1
• Capacity: 10
• Features: Semi automatic
• Working Pressure: 6 Bar
• Uses: Heat Transfer
• Minimum Order Quantity: 1 Piece

Hepa Filter Making Machine is one of the uniquely designed ranges of instruments that are highly catered by our prestigious client base. Our sophisticated engineering products are manufactured with hi-tech technology, for ensuring greater precision and result-orientation. These strongly-built portable equipment are very easy to operate and convenient to maintain.

• Machine Type: Automatic
• Rust Proof: Yes
• Phase: Single Phase
• Power: 1.5 kW
• Machine Speed: 0-35 m/min
• Fabric Width: 2000 mm