Centrifugal Finishing Machine Dealers

Centrifugal Finishing Machines are very high gravitational forced machines specifically developed for those components which require long process times in Vibratory Finishing machines.There are several options available — straight barrels, inclined barrels, removable barrels (for small machines), variable speeds, media parts separators, rubber/polyurethane linings, conveyors, etc.

Centrifugal finishing is a unique high energy mass finishing process, specifically developed for smaller components and for those that require long process times in other finishing mechanism. Ideally suited for high quality finishing and can process even fragile & delicate parts without any distortion. this machine comes with removal barrels (small machine) and fixed barrels (large machines). we provide standard machine as well as design customised machines for customer’s specific requirements and enhance components finishing. principle :- centrifugal finishing machine is composed of number of barrels mounted on the periphery of turret. The turret rotates at high revolution per minute (rpm) in one direction while the barrels are rotated in the opposite direction. Parts to be deburred and finished are placed in each of the barrels, normally together with media, water and some form of compound. turret rotation creates a high centrifugal force of up to 50 times earth gravity, thus compacting the load within the drums into a tight mass. the counter rotation of the barrel causes activity of this tightly packed mass. The media slides against the parts being processed, removing burrs and improving surfaces. The abranding action during the high centrifugal force results in a very short process cycle. The inclined axis barrel rotation generates unique super-eight motions, which causes additional rubbing and polishing effect. features : fixed barrels & removable barrels with straight & inclined barrels position. Media & components separator. Pbr / polyurethane lining. Variable speed drive. advantages : save production time because much faster than any other systems. Consistent results and most efficient. Easy to operate and no special technical skill required. Delicate & tiny parts also possible.

Dalal brand Centrifugal mass finishing G -Force machines starts from 16, 30, 50, 80,100, 160 & 240Ltr onwards for faster finishing to meet daily production volume per shift basis for specified parts.

We offer Che Series Centrifugal High Energy Finishing Machine. Model Number : 4 Barrel Manual Models- CHE-30, CHE-40 3 Barrel Semi Automatic Models- CHE-40, CHE-80, CHE-240 Description : Centrifugal High Energy Finishing Machine is manufactured to meet the most rigid standards as demanded by specific industrial requirements of high volume and high surface finish. The machine generates a very high centrifugal force for extremely low process times. The machine is fitted with 4 hexagonal barrels with replaceable polyurethane lining. Sizes up to a maximum of 240 liter capacity are available with complete automated unloading mechanism.

SUPER FIN centrifugal finishing is a unique high energy mass finishing process. In this machine four barrels are mounted on the periphery of the roating turret.  As turret roates along its axis at high speed, centrifugal force is generated inside the barrels. These barrels are also rotated along its own axis (straight axis or skew axis) in opposite direction. Each barrel contains media, finishing compound, water and parts to be finished.  Due to rotation of turret & barrel, media inside barrel rub against the parts under pressure. The high pressure sliding / rubbing action of media performs the surface finishing of the parts and reduces finishing time to just a few minutes from many hours. SUPER FIN is ideally suited for high quality finishing. It can process even fragile & delicate parts without any distortion.

When it comes to processing smaller work piece bathces, compact centrifugal disc finihsing machines represent a cost effective alternative to the fully automatic double batch systems. They offer many of the standar technical features of the "bigger" machine range. With their space saving footprint and ease of operation these compact units are the ideal complement to conventional vibratory finishing systems.

We manufacture high quality Centrifugal Barrel Finishing Machines, used for mass finishing process machine. Centrifugal Barrel Finishing uses media, compound and water to deburr and surface finish components with the added advantage of being a fast and controllable operation. Standard machines manufactured by us have circular as well as hexagonal barrels with some barrels being set at an angle for the principal axis providing a long flow path and a figure 8 path. These machines are ideal for operations on fragile parts. Customers can avail these machines in capacities ranging from 7 litres to 80 litres.

Centrifugal finishing machines are specially designed and, develoed for tiny mini or small part or those required heavy duburring and mirror, polishing  

entrifugal finishing is a unique high energy mass finishing process. In this machine four barrels are mounted on the periphery of the roating turret, As turret roates along its axis at high speed, centrifugal force is generated inside the barrels. These barrels are also rotated along its own axis (straight axis or skew axis) in opposite direction, Due to rotation of turret & barrel, media inside barrel rub against the parts under pressure. The high pressure sliding rubbing action of media performs the surface finishing of the parts and reduces finishing time to just a few minutes from many hours.

Rawal Engineering centrifugal barrel finishing machine is the powerful tumble yet gentle process for tiny, delicate & extremely fragile components without any distortion. The machine use a special HIGH-G force that significantly reduces process time.

Centrifugal Finishing Machine, Finishing Machine, Bolts, Grinding Wheel

Centrifugal Finishing Machines, Automated Deburring and Finishing Syste