Elastomeric Coatings Dealers

Rain guard is an elastomeric polymer with the property of viscoelasticity (“elasticity”), generally having notably low young’s modulus and high yield strain compared with other materials.

“IC PRECISEAL” is single component, polymer modified, elastomeric waterproofing coating for concrete and masonry surfaces. It is a single component and only water is to be added during mixing at site. The product can withstand water impermeability against hydrostatic pressure to counter positive as well as negative side water pressure ingress. The product can be easily applied by brushing or by spray equipment for larger areas. It has a very high tensile adhesion strength, crack bridging capability and is UV resistant. It can be applied both on the exterior and interior surfaces. “IC PRECISEAL” complies with the guideline given in EN 14891, ASTM D5385, EN 1348 and DIN 1048. Features and Benefits “IC PRECISEAL” being Single component, does not require mixing of two or more components at site, thus ensuring accuracy and proper quality. Only water is to be added before use at site and mixing can be done manually or mechanically with stirrer, resulting in considerable saving of time and labor. Waterproofing coating system for new and existing surfaces. Forms flexible and washable membrane. The membrane coating is breathable, which allows water vapour to escape, diffusing the pressure buildup. Highly effective for Positive & Negative sides of hydrostatic pressure Positive side water Impermeability : 5-7 Bar Negative side water impermeability: 1.5 Bar Effectively seals all existing cracks in the surface. Crack Bridging Capability : 1.5mm. Good resistance against UV and Infrared Rays. Strong adhesion with all Cementitious surfaces, Non-Toxic, hence suitable for all types of water retaining structures. No additional dead load on the structure after application. The surface is ready for any subsequent application within 48 Hrs. Environment friendly coating, no VOC, improving the LEED score of the structure. Areas of Application   Terrace Water proofing. Sloping Roofs and Chajjas. Plastered masonry, External walls. Overhead and underground water tanks. Swimming pools. Toilets & Bathrooms. Basements. Canals & dams etc.

We do end to end turnkey projects across Pan India starting 40 rupees per Sft including Labour, material, transport and all inclusive. We use Acyrlic Elastomeric Polymer Waterproofing coating using 4 layers process as below: All surfaces to be coated will be made clean, dry and free from dust, dirt, oil grease and other contaminants. Concrete and Cementitious substrates will be well compacted. Rainseal is applied using Soft Brush or Rollers or Spray guns. It’s a 4 layer process – First layer is Primer (diluted Rainseal), Second layer is first coating of Rainseal, third layer is Geotextile membrane for reinforcement and fourth layer is Rainseal second coating. 2-3 hours needed to dry each of the layers. The final thickness to be achieved depends on the requirements of the individual roof. Video of the Application Process:

High Performance acrylic polymer modified elastomeric waterproofing is a three-layer system with coats in different colors ensuring proper build-up of the thickness, making it a reliable waterproofing system.MonoProof AEW is a two component acrylic modified elastomeric waterproofing which consists of specialty hard-wearing aggregates and liquid acrylic emulsion. It is a seamless, waterproof coating providing a tough and durablewater tight coating which cannot be easily damaged orworn away.

We are offering texo elastomeric coating. This is a waterproof texture coating ,applied on external façade, followed by application of elastomeric waterproofing coating.this coating is highly used for structures where patch plaster is done,and to give a complete new aethetical look,texture is applied ,and coating of desired shade and color. advantage of covering the irregular and dissimilar textured plaster.

Elastomeric coatings Lotus Effect Elastomeric Heat Reflective Coating and Elastomeric Heat Reflective Coating. In addition to this, hereunder mentioned are the advantages and technical specifications of the Elastomeric Deck Coating. Heat reflective nano-tech barrier; Cooling load is reduced.

Elastomeric coatings it integrity while bridging normal cracks which may develop within the substrate below. Unlike urethane elastomers, CEL 400 is not moisture sensitive and provides excellent adhesion when applied over damp surfaces.

Thermal Insulation Coatings is Elastomeric Thermal Insulation and Water proof coating. After curing it forms heat barrier, flexible, and strong film which bridges cracks, prevents peeling, future cracks, growth of algae or fungi. It prevents water seepage and is UV resistant.