Rotary Sensors Dealers

• Country of Origin: India
• Warranty: 1year
• Type: Rotary Torque Sensor
• Application: Industrial Use
• Power: 15w
• Condition: New
• Color: Blue, LIGHT BLUE
• Brand: NICTECH

WIRELESS AND SLIP RING BASED ROTARY TORQUE SENSOR WITH DAM SERIES NICTECH INDICATOR AND DATALOGGER Measurement range: The range of torque that can be measured, such as 0–100 Nm or 0–10,000 Nm    Operating temperature: The temperature range in which the sensor can operate, such as -53–121°C    Maximum shaft speed: The maximum speed at which the shaft can rotate, such as 5,000 RPM    Output: The output of the sensor, such as 2 mV/V    Linearity: The linearity of the sensor, such as 0.10% FS    Hysteresis: The hysteresis of the sensor, such as 0.10% FS    Zero balance: The zero balance of the sensor, such as 1.0% FS    Overload capacity: The overload capacity of the sensor, such as 150% FS    Material: The material the sensor is made from, such as stainless steel or aluminum    Electrical connection: The type of electrical connection the sensor uses, such as a 4-pin or 10-pin twist lock connector 

The E200 ORT (Optical Rotary Torque) transducers provide an ideal means for precise dynamic measurement of rotary and static torque of less than 500Nm at high speed and high bandwidth. E201E202 Transducer Display Interface is required with the E200 ORT Series (Optical Rotary Torque) Transducer.

• Type: Sensors
• Application: Industrial Use
• Condition: New
• Warranty: 1year
• Country of Origin: India

We are dealing in rotary torque sensor, • Install the shafts in the coupling hubs before fastening the couplings’ clamping screws! • Do not stretch the bellow couplings beyond the specified permissible elasticities. • The input and output shafts must be free from grease and burrs. • The shaft diameters should be made with a j6 tolerance to obtain the H7j6 preference fit.

• Material: SS
• Features: Slip ring-based torque sensor ,Compact size, Designed for lower duty cycles.
• Hysteresis: +/- 0.1% of RO
• Nonrepeatability: +/- 0.2% of RO
• Rated Output: 2 mV/V nom
• Excitation: 5-11 (VDC or VAC)
• Bridge Resistance: 350 Ohm nom
• Operating Temperature: 14 to 194 deg F (-10 to 90 deg C)
• Model: TRS300

• Country of Origin: India
• Type: Rotary
• Material: Mild Steel
• Application: Industrial Use
• Color: Black
• Warranty: 1 Year

We offer a wide range in rotating holder type assembly with different spring id. I.e. 3.00 mm, 3.70 mm, 4.00 mm, 4.70 mm, 5.00 mm, 6.00 mm, 6.35 mm in both chrome plated m.s. And s.s. ,and with different holder i.e. 11.30 mm, 12.00 mm, 13.00 mm, 14.00 mm, 16.00 mm, 17.00 mm, 19.00 mm in both single and double slot.

“Rotary Torque sensors” are specially designed for measurement of applied Torque with high accuracy. It consists of specially designed steel structure, which operates in a predictable & repeatable manner when torque is applied. This torque is translated into electrical signal as change in resistance of strain gauges, the change in resistance indicates the degree of deformation which in turn directly proportional to applied Torque. Bonded strain gauge Torque sensors are incorporated with four arm Wheatstone bridge network, which acts as an adding and subtracting electrical network.

• Features: Ease installation and removal, Analog and digital interface, Low maintenance.

Specifications:- Types:- RTD (Pt-50, Pt-100, Pt-200, Pt-500, Pt-1000, Cu-2000) Assembly :- Simplex/Duplex Types of Insulation:- Ceramic Insulation Type of Sheath:-SS304, SS316 etc as per your application. Dimensions:- Diameter of sheath from 3mm to 8mm (In exceptional case diameter can be increased) Shapes & Sizes:- As per the requirements or Application. Cable :- Tef/Tef, Tef/Tef/SS, Tef/Fg/SS…

• Features: Contact less transmission of the measurement signal, Measurement on rotating and stationary parts, Cylindrical shaft ends for non play friction joints, Digital Torque indicator with RPM indicator.
• Accuracy Class: 0.2
• Torque output signal: 0-10VDC, 4-20ma, RS-232 etc.

• Effective Rotational Sensing Range: 0 to 360 degrees of rotation
• Input Voltage: 5.0V ±10%
• Output Voltage: 0.5 to 4.5 VDC (ratiometric)
• Maximum Output Current Range:: 8mA
• Minimum Output Current Range:: 8mA

Rotary position sensor with high tolerance for misalignment Dual (redundant) outputs assure very high reliability Non-contact rotary position sensing to full 360° rotation No mechanical interface: - Nothing to break or wear out - No possibility of jamming or resistance to motion Sealed design meets IP68 level water immersion per IEC 60529 5VDC ratiometric outputs Linear output over specific angular rotation ranges available on request Performs with standard AS500106 magnetic actuator — factory programmable for use with other magnets Custom programming option for rising or falling output slope with selectable offset, gain, clamp voltage PWM output option available for custom applications Rugged design includes EMIESD protection to SAE J1113 standards Maximum operating temperature of 125°C

• Brand Name: Honeywell
• Model Number: RTP-MAG-X
• Sensor housing: PBT plastic
• Ingress protection: IP69K
• Operating temperature range: -40 DegreeC to 125 DegreeC
• Shock: 50 G peak
• Vibration: 20 G peak

• range: 500 g to 2,000 t.

We are exporter and supplier of Load Testing Machine. We have load & torque cells of the finest quality, right from 500 g to 2,000 t. Our range also includes reaction and rotary torque cells from 1 Nm to 5000 Nm, with end connections of types such as shaft, flange, threads, etc.

• Effective Rotational Sensing Range: 0 to 360 degrees of rotation
• Input Voltage: 5.0V ±10%
• Output Voltage: 0.5 to 4.5 VDC (ratiometric)

Rotary position sensor with high tolerance for misalignment Dual (redundant) outputs assure very high reliability Non-contact rotary position sensing to full 360° rotation No mechanical interface: - Nothing to break or wear out - No possibility of jamming or resistance to motion Sealed design meets IP68 level water immersion per IEC 60529 5VDC ratiometric outputs Linear output over specific angular rotation ranges available on request Performs with standard AS500106 magnetic actuator — factory programmable for use with other magnets Custom programming option for rising or falling output slope with selectable offset, gain, clamp voltage PWM output option available for custom applications Rugged design includes EMIESD protection to SAE J1113 standards Maximum operating temperature of 125°C

• Type: Rotary Position Sensor
• Application: Automobile Use, Industrial Use
• Color: Black
• Condition: New
• Power: 15w, 20w
• Warranty: 1year

• Material: ms
• Country of Origin: Made in India
• Color: silver
• Usage/Application: industrial

• Color: Green
• Brand Name: ACP,Spain
• Housing Material: Plastic materials be self-extinguishable
• Usage/Application: Appliances Controller
• Number Of Pins: 3 Pins
• Voltage V: 250 VDC
• Size: 15 mm
• Operating Temperature: -25 DegreeC to +70 DegreeC