Tablet Compression Machine Dealers

Introduction This machine is quite useful on field Laboratories or mobile testing laboratories or Vans which frequently change site or location. It is particularly useful where constant and consistent Electric power is not available. The load is applied manually and observed on a Pressure gauge. The Pressure Gauge has maximum load indicator which stand still even after the specimen under test crushes and has to be set to zero manually.   Salient Features High Stability Self-aligning platen assembly. Gauges are calibrated in Kilo Newton against certified Proving Ring. Suitable for testing cubes of various sizes Using special platens, bricks also can be tested. Hard chrome plated piston with new type of long life oil seal. Four Pillar Model - superior in design, reliability and accuracy Practically no welded parts, all joints reinforced with heavy nut/bolt to withstand occasional over loading and to ensure center loading. Rounded Corners – add to elegance and safeguard against injury Hardened and grinded platens with guide lines for placing sample for Testing   Optional Accessories (at extra cost) Spare Oil Seal Brick Testing Attachment Hydraulic Oil (Tin of 5 Liters)  

We are offering compression testing machine. Compression testing machine - (ctm-01) principal of operation: operation of the machines is by hydraulic transmission of load from the test specimen to separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces. Load is applied by a hydro-statically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamo-meter system housed in the control panel. The cylinder of the dynamo-meter is also of self-lubricating design. The piston of the dynamo-meter is constantly rotated to eliminate friction. The load transmitted to the cylinder of the dynamo-meter is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. Application : fie compression testing machine is designed for test materials under compression bending, transverse and shear loads. Hardness test on metals can also be conducted. Salient features features :the fie compression testing machine incorporates design features to enable high accuracy testing with economy, speed & versatility. Loading accuracy as high as + 1% straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials • motor driven geared shafts for quick effortless adjustment of cross-head-to facilitate rapid fixing of test specimen. • high reading accuracy due to large size and design of dial. Wide range of standard and special accessories, including load stabilizer. Large effective clearance between columns enables testing of standards specimens as well as structures.

When a global pharmaceutical company specialising in delevoping and distributing therapeutic solutions and producing over 50 million pharmaceutical packages a year, required a new dust extraction system for their tablet packaging line, they contacted Camfil to provide the solution. Having been a customer of Camfil S.p.A. for many years, buying HVAC filters, this major pharmaceutical company knew that Camfil supplied quality products and that Camfil also had the best solution for dust extraction in the pharmaceutical industry. Having looked carefully at the customer’s requirements Camfil developed the right solution, including protection for the operators at the tablet machine and protection for the maintenance person-nel removing the dust from the collector and changing the filter cartridges.

compression testing machine "insif" hydraulic hand operated 50 tonnes capacity 100 tonnes capacity 150 tonnes capacity 200 tonnes capacity.

Compression Testing Machine (Electrically Operated) - Four Pillar type It is an electric cum hand operated for compression tests on concrete specimens up to 20cm dia and 30 cm in height. The machine meets the essential requirements of various Indian, British & American standards for compression tests. Loading Unit : The hydraulic jack of 2000 kN capacity is fixed to base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head and can be raised for lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower platen.   Pumping Unit : The motorized pumping unit which is housed in an elegant console is of double plunger type and is driven by 3 phase 440 volts 50 cycles electric motor. The pumping unit is separate unit connected to the jack by means of a steel connecting tube. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with gauges. A maximum pointer is provided to facilitate taking of the reading after failure of the specimen. The pressure gauges are fixed on the pumping unit at an angle for easy readability. The machine is fitted with a hand wheel control which enables the rate of application of load to be varied. The machine is also equipped with facilities for hand pumping in case of power failure. The electric pumping unit is fixed with a micro-switch off the motor automatically as the load on the machine approaches the rated capacity. Relays are also incorporated in the pumping unit so that in the case of break-down of power supply, the motor will stop and would not-re-start unless starting switch is operated.

Product Code: EKE 305H-EKThe Digital Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design emphasizes simplicity, both of construction and operation, and makes the machine easy to use and maintain. The unit is compact, making it useful for site applications. The digital machines are provided with a pace rate indicator to indicate pace rate on a Bar Graph. With a little experience, the pace rate can be controlled manually while the test is in progress.The Complete unit comprises of Loading Unit :The loading unit is of fully welded construction having a cross head, base and solid side plates. The hydraulic jack is fixed to the base. The platens of the machine are hardened, ground and polished. The upper platen is provided with self-aligning action to facilitate testing of various size specimens, suitable size spacers are provided.Pumping Unit:The two speed pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accuracy of pacing. The digital read-out unit, incorporates a 4-digit display, calibrated in kN and features integral load pacing in kN/Sec. Maximum load is held and retained for approx 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually with the help of a bar graph indicator. Logged data printing facility through a parallel port interface is provided in the machine. Readings upto 1000 complete runs/tests can be stored in the memory.