Butterfly Valves Dealers in Tarihal, Hubli (17 products available)

Sizes in mm(inch) : Pressure Rating

Wafer, Lugged, Double Flanged (Replaceable Seat, bonded Seat, PTFE Seat, Metal Seat) : 40 (1.1/2") to 150 (12")

PN16 : 200 (8") to 600 (24")

PN10 : 150 (6") to 2000 (80")

PN10, PN16, PN6, PN2.5 : 50 (2") to 600 (24")

Butterfly Valve is used to control and regulate the flow of Liquid or gas when installed in a pipe circuit. Butterfly valves are typically utilized in large line sizes in chemical services, waste and water treatment applications and fire protection systems. Due to the valve design, incorporating a small face-to-face dimension and lower weight than most valve types, the butterfly valve is an economical choice for larger line sizes (i.e. 8" and above). Additional advantages of the butterfly valve are standard face to face dimensions, relatively high coefficient of flow (CV) and their availability in chemically resistant materials. The butterfly valve complies with ASME face-to-face dimensions and pressure ratings. This enables the valve to be easily retrofitted in line regardless of the manufacturer. In addition, the small face-to-face dimension facilitates piping design. The ASME pressure classes adhered to 150, 300 and 600# allowing a maximum pressure of 1500 PSI. The butterfly valve is considered a high recovery valve, since only the disc obstructs the valve flow path. The CV is relatively high; the pressure drop across the valve is relatively low. Hence the pump size is minimized and system wear reduced compared to that of low recovery valves (i.e. globe valves). Sizes available : 50mm to 1000mm Range : The valves pressure rating ranges from 150# to 300# with Screwed end, Flanged end or Butt weld end. They are also available with Lever operation, Gear operator, electrical actuator and Pneumatic actuator. Material used : Cast Iron, Carbon Steel, Stainless Steel, Duplex, Super Duplex, Monel, Hast alloy, etc

Material : CI/WCB/SS

Size : 15mm to 300mm

Class : PN10,PN16

Automated butterfly valves are manufactured both in lugged wafer type design. Manufacturing range of butterfly valve covers standard fire safe, soft seated and metal seated, double offer and triple offset. Hydraulic and electric operated butterfly valves are available.

Butterfly Valve are Quick-opening Valve that Consist of a Metal Circular Disc or Vane with Its Pivot Axes At Right Angles to the Direction of Flow in the Pipe, Which When Rotated On a Shaft, Seals Against Seats in the Valve Body. We Lead in the Manufacturing of Different Types of Butterfly Valves.

Material : CI, DI < WCB, CF8, CF8M

Size : 50mm to 800mm

Type : Wafer type resilient seated

Ends : Wafer

Rating : PN 10/ PN 16

Operation : Lever, Gear Box, Pneumatic, Electric Actuator

Testing : As per API 598/ BS EN 12266

We are manufacturing from 50 mm to 600 mm Butterfly Valves of Rubber Lined, Double Eccentric & Triple Offset in Class 150,300 , PN 10 & PN 16 for all applicationService Media.

eccentric butterfly valve, resilient seated butterfly valve

We are a company which is engaged in the supply of butterfly valves.

We are well known exporters of rubber seated butterfly valve from India.

Butterfly Valves

Butterfly Valves, Choke Valves, Severe Service Control Valves

Bellow Seal Globe Valve, Knife Edge Gate Valve, Plug Valve, Cryogenic

Butterfly Valves, ball valve spindles, precision cnc turned components

Ball Valve, Plug Valve, Valve