Testing Machines Dealers in Indore

The most commonly used method for determining hardenability is the end quench test developed by Jomini and Boegehold. The details of the test are covered in IS : 3848 – 1981 and ASTM A 255. • In this test a normalized 25 mm diameter and 100 mm length test sample of steel to be evaluated is heated uniformly to its austenitizing temperature. The specimen is then removed from the furnace and placed in the end quench test Apparatus and immediately end quenched by a jet of room temp. water. • After end quenching, longitudinal Flat Surfaces are ground on opposite sides of the test piece as per dimensions. This grinding is very important for correct positioning of the sample in the fixture and also for accurate repeatable and reliable test results. • Jomini Test Fixture is to be positioned on the main screw of the hardness tester for checking hardness of the test sample. Hardness at equal intervals (1 mm or 1/16") to be checked and noted. Plot the resulting data on graph paper with hardness value as ordinate (Y axis) and distance from the quenched end as abscissa (X axis). By comparing the curves resulting from end quench tests of different grades of steels, Their relative hardenability can be established. Thus the flatter the curve, the greater the hardenability.

Cube Testing Machine   Models in 3 type :-  1. CTM 100 Ton (1000 KN) Hand Operated (Manuel) 2. CTM Digital 2000 KN (Electrical Cum Digital Model) 3. CTM Premium Heavy Model Digital 2000 KN (Electrical Cum Digital Model)   Produce Description:-  Compression Testing Machines/ Strength Testing Machine/ Cube Testing (Electronic Cum Digital Model ) are used to determine the compressive strength of concrete cylinders, cubes, and masonry blocks. We Innovative Instrument are leading Manufacturer of Compression Testing Machine. 2000 KN 200 Tons Capacity Two Pillar Model Electrically Operated fitted with dual display i.e. load gauge 0 2000 KN 10 KN Division and Digital Load Indicator 2000 KN 1 KN Division. The micro switch fitted in load gauge and relay contact in digital load indicator to protect the machine from overloading. The machine is suitable for operation on 440V, 3 phase,Ac supply     Suitable for use on Concrete Cubes of any size upto 5cm x 5cm x 5cm, 7.06 x 7.06cm, 10cm x 10cm x 10cm, and 15cm x 15cm x 15cm also on 10 x 20cm and 15 x 30cm high Concrete Cylinders. The load is applied thru hydraulick assembly.The lower platen is on the Hydraulic ram, and upper having a spherical seating is adjustable. The machine is provided with an air release valve and the load is automatically indicated on the 15 cms diam hydraulic pressure calibrated against an N.C.B.M. tested Proving Ring and fitted with a legless max pointer in addition to the Live pointer. 

Electronic Blood Sugar Testing Machine, Baby Diaper

Compression Testing Machines, Solvents, Test Tubes, Jars, Beaker

Special Testing Machine, Engine Trolley, Special Purpose Machine

Digital Universal Testing Machin

Material Testing Machines, CNC Grinding Machines, CNC Simulation Syste

Glow Wire Test Apparatus, Hot Deformation Test Apparatu