Testing Machines Dealers in Sangli

Measurement of Angle of Twist by Rotary Encoder, Display of Torque and Angle of twist on LCD display provided on Data Acquisition System, Facility for connecting the DAS Panel to PC, Accuracy of torque measurement ± 1% in the range from 4% to 100% of machine capacity.

Shock absorber testing machine , We also manufacture the equipments and control systems for sugar industries mainly mill automation, boiler instrumentation, prd stations and embibition water control system.

the horizontal chain rope testing machine, we are offering are widely known as wire rope testing machines in the global markets. we are offering horizontal chain machines as per the customization of clients, so that they can beneficiate by them. the technical specifications and different qualities of our offered range have sensationalized global markets with their presence. in demand for :- machines are designed to test chains, ropes & any long specimens for proof test or destructive tensile testhigh loading accuracy & infinitely variable straining speeds to suit a wide range of materialscontinuous roll autographic recorder to get load - elongation graphrobust loading frame, simple controls & easy to operateadequate safety devices for safe operationanalogue models with large dial & load measurement by pendulum dynamometer principledigital / computerized models are also available where load vs elongation is in digital display & printout of results can be takenspecial accessories like - extra bed length, extra ram stroke, various special grips / attachments / fixtures as per sizes / shapes of specimens, load-stabilizer (at extra cost) can be provided to suit special applicationvarious models – maximum capacity from 100 kn to 3000 knloading accuracy well within ±1%, conforms to is: 1828 / bs:1610 traits :- durable for a long runstain resistancesmooth functioninglow maintenance required

This is low cost Impact testing machine & it is specially designed for engineering colleges. This Machine conforms to IS 3766-1977, IS 1598-1977, IS 1757-1988,IS 1499-1977 and BS 131 Part I, II, III, IV. standard. New modified Brake drum unit is provided to stop the pendulum swing instantly after test. Safety guard is provided for operator safety.

Features : This machine is used to test the fatigue strength of materials. This is a rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia. specimen is held in special holders at its ends and loaded such that it experiences a uniform bending moment. The specimen is rotated at 4200 rpm by a motor. A completer cycle of reversed stresses in all fibers of the specimen is produced during each revolution. The bending moment is applied with a lever system and can be easily changed by moving a weight over the lever. Total number of revolutions at which the specimen fails are recorded by a Digital counter. An interlocking system puts off the motor at specimen failure. Machine meets requirements of  IS 5075 - 1969. Light weight, compact size, simple design. Table model, no need of foundation. Simple lever system of changing load. Accurately calibrated as per IS 5075. Calibration in Nm available on request.

We are capable of delivering the product range that is accessible from our massive inventory located at Sangli(India). Equipped with the most up-to-date inventory control and management system, we cater to the seasonal demand to a continuous one as well. We keep records of the products to make sure that the range is kept safe in our spacious warehouse.

 Rockwell Hardness Testing Machines is designed for measuring hardness of metals & alloys of all kinds, hard or soft, whether   round, flat or irregular in shapes.• Rockwell Hardness Testing Machines is ideally suitable for laboratories, tool rooms, Heat treatment shops, R&D departments,   inspection departments, foundries & educational    institutions.• Automatic weight selection with automatic zero setting dial gauge.• Rockwell test minor load is 10 kgf & major loads are  60,100,150 kgf.• Rockwell hardness scales such as HRA, HRB, HRC, etc. is obtained by using different types of indentors ( Diamond / Ball ).• Test height x Throat is – 215 x 132 mm• Extra test height & throat of  295 x 148 mm, Model : MRS-150 is also available.• Motorized versions are also available.• Machines strictly conforms to IS:1586- 2000.

We are among the most sought after companies which deal in manufacturing, exporting and supplying Universal Testing Machine to the clients. Our range is widely used in the testing of rubber, plastic, electrical wire and cable, composite, plastic profiled bar, waterproof roll, metal and non-metals. It is used in conducting tests on different grounds like tensile strength, compression and bending ability.

Elongation Tester, bactra-96 fertilizer, Downey Killer Plant Growth Regulato

Vickers Brinell Hardness Testing Machines, Hardness Testing Machin

Shock Absorber Performance Testing Machine, Bearing Testing Machine

Gold Testing Machin

Portable Hardness Testing Machine, D Two Instrument, Hardness Test Block

Portable Hardness Testing Machines, Portable Hardness Tester, d2 Instrumen

Brinell Hardness Testing Machine, Tungsten Carbide Bal