Tablet Compression Machine Dealers

Product Code: EK 307-1   The equipment consists of a Loading Unit, an integral double acting manually operated pumping unit fitted to the base of the machine and a calibrated Load Gauge is fitted with the top. It has a detachable Hydraulic Jack. The hydraulic cylinder is placed on the base of the Loading Unit. SPECIFICATION   Capacity : 1000kNMax Vertical Clearance : 350mmMax. Horizontal Clearance : 220mmPlaten Size : 165mm SquarePiston Dia : 152.4mmPiston Stroke : 25mm Optional Extras:   Brick Platens Pumping Unit The hydraulic pumping unit is: Manually Operated or  Electrically operated Analogue Compression Testing Machines  

Some of the specifications of the range include the following: production: 8000 per shift power required: 15 h.p. High compressive strength double colour layer oil tank: 300 ltr size: 8x7x9 feet weight appx: 2 ton

We are Offering Compression Testing Machine (All Models). Our Series Compression Testing machine are the finest of there type obtainable. The rugged construction & extreme simplicity make it possible for even non-technical personnel to operate them with ease and complete dependability. UNIQUE Compression Testing Machine conform to the requirements international Standards like BS ASTM & Indian Standard IS: 516. Some salient Features: High Stability Self Aligning Platen Suitable for Testing Cubes and Cylinders of various sizes Brick can also be tested Digital having function of peak hold facility, memory status, automatic cut-off of maximum Load, Automatic calibration, Alarm generated when the sample breaks down, Sensor fitted for higher accuracy made in Germany. Compression Testing Machines Classified: Analogue models. Digital Models Digital models with pace rate indicators. Micro Controller based models with automatic pace rate controllers. Fully Automatic models. Sizes: available with us: 50kN, 100kN, 500kN, 1000kN, 2000kN, 3000kN & 5000kN Capacities 'Detail Specifications on request

This central driven double rotary tablet press stands out because of its new aesthetic and ergonomically improved design that is benefited with higher turret speed, powerful pre compression force upto 5 Ton. And main compression force upto 10 Ton. Reliable and easy to operate Blitz is fitted with Hydro-Pneumatic power pack for overload pressure release system to prevent damage to tooling and numerous alluring features like auto lubrication for centralized lubrication, central driven and easy to access front controls. Features Double rotary tableting maching, in compliance with cGMP guidelines Powerful Pre Compression and Main Compression force Central drive Outside controls Pressure loading and overloading pressure release mechanism through Hydro-Pneumatic Power Pack System Main motor and force feeder motor driven through ACVFD Auto lubrication Upper Punch Penetration Anti-Vibration Mounts PLC controls with colour touch screen HMI (optional) Pneumatic powder loading system (optional)

■  Load indication either by analogue type indicator or by DRO through transducer. Linear transducer may be provided for deflection indication. ■  Spring Testing Machine both for load deflection & scrag testing. ■  Fatigue Testing Machine.

Product Code: EKE 305H-EKThe Digital Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design emphasizes simplicity, both of construction and operation, and makes the machine easy to use and maintain. The unit is compact, making it useful for site applications. The digital machines are provided with a pace rate indicator to indicate pace rate on a Bar Graph. With a little experience, the pace rate can be controlled manually while the test is in progress.The Complete unit comprises of Loading Unit :The loading unit is of fully welded construction having a cross head, base and solid side plates. The hydraulic jack is fixed to the base. The platens of the machine are hardened, ground and polished. The upper platen is provided with self-aligning action to facilitate testing of various size specimens, suitable size spacers are provided.Pumping Unit:The two speed pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accuracy of pacing. The digital read-out unit, incorporates a 4-digit display, calibrated in kN and features integral load pacing in kN/Sec. Maximum load is held and retained for approx 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually with the help of a bar graph indicator. Logged data printing facility through a parallel port interface is provided in the machine. Readings upto 1000 complete runs/tests can be stored in the memory.

The machine embodies an hydraulic system designed to meet the requirements of Indian standards Specification 516-1959 for compression tests on cement mortar cubes up to 7.06 cms. Loading Unit The hydraulic jack of 500 KN capacity is fixed to the base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head plate, and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centring pin. Loading is accomplished by upward movement of lower platen. A dust cover is provided on the jack to prevent any dust from going into the cylinder. A spacer with a centering locating pin is provided to test small specimens. The lower and upper platens of the machine are hardened ground and polished. Guidelines are marked on the lower platen to keep the specimen coaxial with the hydraulic jack. Pumping Unit The motorised pumping unit which is housed in an elegant console is of double plunger type and is driven by three phase 440 volts 50 cycles electric motor. The pumping unit is a seperate unit connected to the jack by means of a steel connecting tube. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with a 20cm dia, dial hydraulic pressure gauge with 250 division i.e. 0-500 KN X 2 KN. A max red pointer is provided to facilitate taking readings after failure of the specimen. The pressure gauge is fixed at an Angle for easy readability. The machine is fitted with hand wheel control which enables the rate of application of load to varied. The machine is equipped with the facility of Hand Pumping in case of power failure. The electric pumping unit is fixed with a micro-switch to switch off the motor automatically as the load on the machine approaches the rated capacity. Relays are incorporated in the pumping unit so that in case of break down of power supply, the motor will stop and would not re start unless the starting switch is operated. Complete with our own calibration certificate for pressure gauge with National Traceability. Standard Accessories The Machine can be supplied with NCCBM Calibration certificate at an extra cost. The Machine can also be supplied with 2 or 3 pressure Gauges of 100 KN, 250 KN and 500 KN for testing lower strength cubes or smaller size cubes. Optionally, the machine can be supplied with digital load indicator and load cell in place of Pressure Gauge at an extra cost.