Mechanical Universal Testing Machine Dealers

Features : Loading accuracy as high as ±1 %  Straining rate to cover a wide range of materials.  Motorised loading and unloading. High reading accuracy due to large size and design diel. Simple control to facilitate ease of operation.  Fully enclosed and protected load measuring system.  Wide range of standard and special accessories including load stabilizer.  Robust straining frame.  High reading accuracy due to large size and design diel.  Motorised UP/DOWN movement of lower crosshead to enable easy and rapid fixing of test specimen.  Application :Universal Testing Machine is designed to perform Tensile, Compression, Bending and shear tests on metal & Other materials both in the form of test pieces and as finished products. Principle of operation :The test specimen is subjected to load with hydraulic system and is measured precisely with pendulum dynamometer. Load is applied by a hydrostatically lubricated ram.The oil pressure in the main cylinder is transmitted to the cylinder of the pendulum dynamometer housed in the control panel, the dynamometer piston exerts a force proportionate to the hydraulic pessure.This force is transferred through a leverage system to a pendulum. Displacement of pendulum actuates the rack and pinion mechanism which operates the load indicating pointer. Return movement of pendulum is effec- tively damped to absorb energy in the event of sudden breakage of specimen.Machine comprises ofthe following: Strainung Unit : This consists of a hydraulic cylinder & piston mounted on a robust base. The loading frame consists of an upper crosshead, middle crosshead and lower table. The upper crosshead and lower table is connected by means of two plain hard chrome plated columns. The middle cross head is fitted on two hard chrome plated threaded columns. A reduction gear motor drives the chain and sprockets fixed at the bottom of the threaded columns for height adjust- men!. The cylinder and ram is individually lapped to eliminate friction.Axial loading of the system is ensured by provision of a ball seating under the lowertable. An elongation scale with least count of 1 mm is provided for measurement of deformation on various samples. Tensile test is conducted by gripping the test specimen between the upper and middle crosshead.Compression, Transverse, Bending and Shear tests are conducted between the Shear tests are conducted between the middle crosshead and the lower table.  Control Panel : The control panel consists of the hydraulic system .complete with drive motor, oil sump, pendulum dynamometer and the load indicating system. Hydraulic System : The power pack has a directly driven pump which generates a maximum pressure of 200 kgf/cm2. he hydraulic pump producs a continuous non- pulsating oil flow. Hence the load application is very smooth. Oil filter, oil stranier, air breather, oil level indicator and drain plug is provided in the power pack. A pressure compensated flow to the main cylinder. This maintains constant rate of piston movement andhence straining rate is kept constant. This valve is hand operated and gives infinitely variable oil flow to obtain different rates of straining. Pendulum Dynamometer : The oil pressure in the main cylinder actuates the special dynamometer system. Pressurised oil in the loading cylinder pushes up the measuring piston proportionately and deflects the pendulum. The piston is constantly rotated to eliminate friction. The system has effective damping arrangement to ensure smooth return of pendulum aftersudden breakage of test piece. This unit permits selection of favourable hydraulic ratios producing relatively small frictional forces. Load Indicating System : This system consists of a large dial and a pointer. Displacement of pendulum actuates the rack and pinion mechanism, which operates the load indicating .pointer. The pointer moves over a large dial indicating the load. A dummy pointer is provided toregister the maximum load reached during the test. Window type dial is provided for easy and clear changing of load range. Load / Elongation Recording System : A continuous roll ( A strip chart) type load-elongation recorder is provided for plotting load-elongation graph. Horizontal movement of the rack produces load ordinate of the diagram and drum rotation to elonga-tion ordinate, in the ratio of either 1:5 or 1:10. Electronic Universal Testing Machine : Construction : AI make electronic Universal Testing machines comprise of a) Loading Unit b) Measuring Control Panel a) Loading Unit : This is similar to standard loading unit of analogue type universal testing machin. In addition to standard features of regular loading unit, a ROTARY ENCODER is attached to the hydraulic ram to get accurate displacement of the ram. b) Measuring Control Panel : This includes,   

FIE introduces its new model of Universal Testing Machine with design flexibility, a modern appearance and high performance electronics. Some of the features include -   Features :   • Open type crosshead. • Hydraulic wedge action grips.• Load cell technology.• Long test stroke and test space.• Straining at variable speeds to suit a wide range of materials.• Touch screen Control Panel Black and White or colour with printing & computer connectivity.• Tension, Compression and Transverse test facility.  

Loading Accuracy as high as + 1% Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of  materials Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen. High reading accuracy due to large size and design of dial. Wide range of standard and special accessories, including load stabilizer. Easy change from plain to threaded and screwed specimens.  Large effective clearance between columns enables testing of standards specimens as well as structures. Simple controls for easy of operation. Robust staining frame of an extremely rigid construction. Safe operation ensured be means of safety devices. Fully enclosed and protected pendulum.   Application :       FIE Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also be conducted.     Principal of Operation :       Operation of the machines is by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces.     Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represent the absolute load applied on the test specimen.     Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen.       Machine consists of :       Straining Unit        This consists of a hydraulic cylinder motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on to a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross-head is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured be reveling the cylinder and ram of of any possible side loading by the provision of ball seatings.     An elongation scale with a minimum graduation of 1 mm, is provided to measure the deformation of the specimen.     Tension test is conducted by gripping the test specimen between the upper and lower cross-heads,     Compression, transverse, bending, shear and hardness tests are conducted between the lower cross head and the table.     The lower cross-head can be raised or lowered rapidly by operating the screwed columns thus facilitating ease of fixing of the test specimen. Control Panel :        The control Panel consists of a power pack complete with drive motor and an oil tank, control valves a pendulum dynamometer a load indicator system and an autographic recorder.     Power Pack :   The power pack generates the maximum pressure of 200 kgf/cm2 the hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth.     Hydraulic Controls :       Hand operates wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable incorporated in the hydraulic system is a regulating valve which maintains a practically constant rate of piston movement. Control by this valve allows extensometer readings to be taken.     Load Indicator System :   This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by operating the range selection knob. An overload trip switch is incorporated which automatically cuts out the pump motor when the load range in use is exceeded.     Pendulum Dynamometer :    This unit permits selection of favorable hydraulic ratios producing relatively small frictional forces. Pressurised oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer  system. The piston is constantly rotated to eliminate friction. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.     Autographic Continuous Roll Load-Elongation Recorder :   This unit is of the pen and drum type and is supplied as standard. The horizontal motion of the pen produces the load ordinate of the diagram and the drum rotation produces the extension ordinates in the ration of either 1:5 or 1:10.     Accuracy & Calibration :        AII FIE Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during  every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in  accordance with the procedure laid down in BS : 1610 : Part 1 :1992 and IS 1828 : (Part 1) : 1991.     FIE Universal Testing Machines comply with Grade "A" of BS : 1610 : Part 1:1992 and class 1 of IS 1828 : (Part1) : 1991 An accuracy of + 1.0% is guaranteed from 20% from 20% of the load range selected to full load. Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading.

The company has come up as a highly acclaimed Manufacturer, Exporter & Supplier of Mechanical Universal Testing Machine. The high quality Mechanical Universal Testing Machine is designed to perfection and is based on the client specifications. The accurate functioning of the Mechanical Universal Testing Machines, as well as their versatility, has made them popular across the globe. Application : Performs tensile, compression, bending and shear tests on metal & other materials, both in the form of test pieces and as finished products Features Continuous roll auto graphic recorder supplied as standard to enable study of the behavior of materialsHigh reading accuracy due to large size and design of dialEasy change from plain to threaded and screwed specimensRobust Straining frame of an extremely rigid constructionMotor driven threaded columns for quick effortless adjustment of lower cross head to facilitate rapid fixing of test specimenSimple controls for ease of operationSafe operation ensured by means of safety devicesFully enclosed & protected pendulumLoading accuracy as high as + 1 %Wide range of standard and special accessories, including load stabilizerLarge effective clearance between columns enables testing of standard specimens as well as structures Principle of Operation Operation of the machine is by hydraulic transmission of load from test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers & knife edges, which are prone to wear & damage due to shock onrupture of test pieces. Load is applied by a hydrostatically lubricated ram. The oil pressure in the main cylinder is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The dynamometer piston exerts a force proportionate to the hydraulic pressure. This force is transferred through a leverage system to a pendulum. Displacement of pendulum actuates the rack and pinion mechanism which operates the load indicating pointer. Return movement of pendulum is effectively damped to absorb energy in the event of sudden breakage of specimen.

Mechatronic Control System is well-known for the manufacturing and supplying of Mechanical Universal Testing Machines. The hassle free functioning of these Mechanical Universal Testing Machines has raised their demand among the clients. Model : Mech.CS.UTM Features : Loading accuracy as high as ±1%Motorized loading and unloading cycleSimple controls for ease of operationSafe operation ensured by means of safety devicesFully enclosed and protected pendulumHigh reading accuracy due to large size and design of dialEasy change from plain to threaded and screwed specimensTraining roll autographic recorder supplied as standard to enable study of the behavior of materialsLarge effective clearance between columns enables testing of standard specimens as well as structuresWide range of standard and special accessories, including load stabilizer Attributes : High performanceNon corrosiveEfficient resultsSaves timeEasy to operate Click Here For More Detail

Supplied with shear test attachment along with a 180o bend test attachment, this Mechanical Universal Testing Machine is simpler to install as compared to its contemporaries. We are a credible Manufacturer, Supplier and Exporter of Mechanical Universal Testing Machine. Also, this Mechanical Universal Testing Machine is simple to operate.

Electro Mechanical Universal Testing Machines, Hardness Testing Machine