Industrial Valve Dealers in Kolkata

The type most usually supplied Body, Cover and Door are graded Cast Iron. Door fitted with G. M. face closing on Corresponding G. M. Face in Body and the two door suspension lugs hinged on a long brass spindle supported in trunion bearing in both side of body. Flange of valves are faced and drilled in accordance with BS - 10 table “D” or as per ISS. Every Rmco Valve is tested Hydraulically before despatch.   Available size: 50 mm (2”) to 450 mm (18”)

Flange Dimensions & Drilling may be as per IS 1538/BS 10 ‘D’ / ASA 125 or to suit customer’s requirement Valves can also be offered in other material of construction

Diverter valve for pneumatic conveying applications This precision machined valve is designed to prevent contamination and provide line switching for either dilute or dense phase conveying. The two-way PT45 valve operates as a 1 to 2 way diverting valve or a 2 to 1 way converging valve in a pneumatic conveying system for powdered or granular materials. The PT45 operates by rotating the tunnel forward and backwards in the housing by the actuator. This positions the tunnel to either the divert ports or the straight-through ports. The tunnel is supported by shaft bearings in the two end plates and between two thrust washers. The tunnel has position stops located in the housing for fine adjustment of both conveying positions. Tunnel position, whether straight-through or divert, indication is made by two proximity switches mounted in the housing, sensing directly off of the tunnel. A positive seal is made through the selected position between the tunnel bore and the housing interior by seal rings. During tunnel position changes, the seal rings act like a wiper to clean the surface of the tunnel.

Backed by the panel of talented professionals, we offer clients durable range of couplink rotary valves. Free flow air lock system with heavy duty perform and minimum power consume , man power less feeder at very lowest price equipments for industrial uses in the area of all application like cyclone,bag filter,dust collector,screw conveyor,scrubber etc.

As per the needs and expectations of our clients we are indulged in offering Check Valve to our esteemed clients. The offered range is available in various sizes to suit the various needs of the clients. The offered range is fabricated by utilizing best in class raw material and modern techniques. Moreover, our client’s can avail this offered range at industry leading rates

The Automatic Drain Valve automatically discharges precipitated moisture from reservoir with each operating cycle of the control device. The drain valve may be installed on the main reservoir with a pump.