Disc Type Non Return Valve
200 - 300 Per Piece
200 Piece (MOQ)
Material : Mild Steel
Finishing : Polished
Color : Silver
Automatic Grade : Automatic
Usage : Water Fitting
Valve Size : All SIzes
Specialities : Heat Resistance, Durable, Casting Approved
Type : Non Return Valve
Stainless Steel Threaded Gate Valve
Condition : New
Material : Stainless Steel
Temperature Of Media : High Temperature, Normal Temperature
Power : Manual
Corrosion Resistance : Yes
Surface Treatment : Galvanized
Rubber Gas Lift Valves
Size : 1.1/2inch, 1.1/4inch, 1inch, 4/5inch
Type : Hydraulic Control Valve
Material : PVC
Application : Oil Fitting
Color : Black
Pattern : Plain
Condition : New
Forging a strong relationship with our clients, we strive to meet their demands with more precision. We as a Manufacturer, Supplier and Exporter of Rubber Gas Lift Valves are insistent on the quality. Hence, we ensure to procure raw materials from select vendors who, refuse to deliver anything short of quality. Rubber Gas Lift Valves meet the industrial quality of standards without fail. Rubber Valves are available at pocket friendly rates.
Flameproof and Digital Auto Drain Valves
2,400 Per Piece
ON TIME : 1-99 Secs
OFF TIME : 1-99 secs (Variable)
Valve opening : 4mm, coil volt - 230V AC,50Hz
Enclosure : Flameproof IP-65
TECHNICAL SPECIFICATIONS :- INLET /OUTLET PORT SIZE : 1/2" BSP (F) / FLANGED WITH INBUILT STRAINER VALVE BODY - IC S.S TIMER BODY : HARD ABS PLASTIC / FLAMEPROOF OFF TIME : 1 to 99 MINUTES (Adjustable) ON TIME : 1 to 9 SEC (Adjustable) MAX .WORKING PRESSURE :UPTO 16 BAR /KG/CM2 MAX .WORKING TEMP :UPTO 50’C POWER SUPPLY : 230 VAC MAKE : WESTEC Item code : RD16
Automatic Multiport Valve
12,500 Per Piece
1 Piece (MOQ)
Material : ABS Plastic
Color : Black, Grey, Blue
Valve Size : 2 Inches
Usage/Application : Ro Plant
Automation Grade : Automatic
Power Supply : 230 VAC / 50-60 Hz
Max Power : 14 W
Max Pressure : 3.5 Bar
Nominal Flow Rate : 14 m3/h
Nominal Head Loss : 0.66 Bar
IP Protection : IP 65
Hydrant Valve
We are offering hydrant valve.we present an immaculate range of fire protection products that are known for their full proof design in the market. The fire protection products that we offer assure maximum safety from fire. Adept professionals before final dispatch duly check the fire protection products. The fire protection products are highly cost-effective.
Cast Steel Valves
Chetak Machinary Store is recognized amongst successful Suppliers of Cast Steel Valves. We offer premium quality Cast Steel Valves that are manufactured by trusted companies in market. The Cast Steel Valves, we offer, are known for their impressive performance, corrosion resistance and smooth functioning. We offer high quality Cast Steel Valves at very reasonable prices.
Double Flange Butterfly Valves
Body : ASTM - A 126 Grade B (Gry Iron)
: ASTM - A 216 Grade WCB (Cast Steel)
: ASTM - A 536 Grade 65 - 45 - 12 (Ductile Iron)
: ASTM - A 351 Grade CF8 / CF8M / CF3M / CD4MCuN
Disc : ASTM - A 126 Grade B (Gry Iron) + Powder Coated
: ASTM - A 216 Grade WCB (Cast Steel) + Powder Coated
: ASTM - A 536 Grade 65 - 45 - 12 (Ductile Iron) + Powder Coated
: ASTM - A 351 Grade CF8 / CF8M / CF3M / CD4MCuN
: S.G. Iron With Toffon / Powder / Nylon Coated & Rubber Line
Seat : Nitnle / EPDM / Viton / Hypelon / silicon / Neopren
Shaft : AISI 410 / AISI 304 / AISI 316 / AISI 316L
Valve Type : Centric Disc Butterfly Valve With Single Piece Rubber Lined Body
Body Type : Short Water Type Double Flange
Seat Type : Integrally moulded with the body (Renewable Seat)
End Connection : Water type Double Flange Suit to 150#, Table 'D' , Table 'E' & IS 6392 Table 11 (PN 10 / PN 1.6)
Pressure rating : PN 10 / PN 16 / (PN 20 On Request)
Oper. Temp. Range : -20° C To 80° C For Nitnle Seat (Depending on MOC)
Seal Leakage : Tight shut off
Operation : Lever Operated / Gear Operated / Chain Wheel Operated / Extended shaft
Design And Manufacturing : API 609 Category A/IS : 13095 / BS EN 593
Valve Face To Face Dimension : Short Water As Per ISO 5752 TAB 5 / API 609 Category A / ISO 5752 TAB 1 (BS 5155)
Flange Standard Conformity : ASME B 16.5 / ASME B 16.47 Class 150, BS 10 TAB D, E & F
Inspection & Testing : API 598 / BS EN 12266 - 1
Top Flange Drilling : ISO 5211
Controlled Pressure Hydrant Valve
Product Code No. : Description
LV- CPH-01 : Made in Gun Metal 1 ½” NB Flanged inlet as per ANSI
LV- CPH-02 : Made in Gun Metal 1 ½” NB Flanged inlet as per Pn16
LV- CPH-03 : Made in Gun Metal 2 ½” NB Flanged inlet as per ANSI
LV- CPH-04 : Made in Gun Metal 2 ½” NB Flanged inlet as per Pn16
OIL REGULATING VALVES
4,380 Per Piece
5 Piece (MOQ)
Material : Mild Steel
Pressure : Low Pressure
Color : Black and Brown
Finishing : Polished
Usage/Application : Oil Industry
Valve Size : 8inch
BLOCK AND BLEED VALVE
MODEL NUMBER : MODEL VB6
Mounting Type : Pipe to Pipe (Direct)
Special Features : 1 Inlet & 1 Outlet with Vent Plug
M.O.C. of Body : AISI 316 SS
Stem Packing : PTFE, Graphoil
Pressure Rating : 6000 PSI
Temperature Rating : 240°C
Process Connection : 1/8" to 1"
Thread Type : NPT, BSP, G, R, Metric etc
Connection (Inst. x Proc.) : Male x Female, Female x Female, Male x Male
Vent Port : M6
Options : Conformity as per NACE Standard Oxygen Service, Other MOC available on request, Vent Plug in 1/4" NPT
Gate Valve
10 Piece(s) (MOQ)
This Cast Steel Gate valve features a bolted bonnet with Class 150 to Class 1500 flanges in sizes 2 to 30”. The one piece flexible wedge with a tapered H shape is fully guided and suitable for steam and other high temperature service. The yoke sleeve is designed to allow for disassembly without disconnecting the bonnet and stem. Standard body materials are A216-WCB, A217-WC6 or A351-CF8. Depending on service conditions, other material options are available for valve and trim. Sizes: 2” – 30” Larger sizes are available upon request ANSI Class: 150 – 1500 Features: API 600/603, Testing to API 598, Bolted Bonnet/Pressure Seal Bonnet, Outside Screw & Yoke, Flexible Wedge, Fully Guided Wedge, Rising Stem, Standard/NACE Body: Carbon, Alloy or Stainless Steel (WCB, LCC, WC6, C5, C12, CF8) Trim: Trim 5, Trim 8, Trim 16 End Connections: Raised Face (RF), Flat Face (FF) Also available in RTJ and Butt Weld *Additional sizes and materials available upon request. Availability is dependent on market demands FUNCTION Gate valve is characterized by a sliding wedge which is moved by actuator perpendicular to the flow direction. There are a variety of valve sizes and types. The valve is used primarily as a stop valve to open or close fully. Normally it works for slurries, viscous fluid, etc. but not for throttling. The gate valve usually has a minimum pressure drop in full open and a tight seal in full close, and therefore there is little possibility that contaminants may enter the valve. BODY AND BONNET The body and bonnet is designed to achieve most uniform distribution of stress on all sides and minimum turbulence and resistance to flow. The bonnet on valve is equipped with back seat ring up to 12" for Class 150 & 300 and up to 10" for Class 600 or higher. The yoke is integrated with bonnet. BODY AND BONNET JOINT Body-bonnet joint of gate valve is machined as follows: Class 150 ................................... Plain faced Class 300 and higher class ........ Male and female We can supply any kinds of gasket as required by customer WEDGE The valve is normally supplied with a one-piece flexible wedge of which the cross section is a tapered H shape. All wedges are fully guided. The flexible wedge is cast or machined with circumferential grooves to allow the seating faces to move independently and adjust the movement of body seat. It is used where the line load or thermal expansion of system may distort the seating face of valve, and especially useful to prevent sticking that may happen in case the valve is closed at a hot temperature and opened at a cold temperature. Ideally the wedge is suitable for steam and other high temperature service. SEAT RING The stem connection to the wedge shall have an integrated tee head (without welding)and is rectified in the packing area to ensure a long life and perfect tightness. Through experiments, we have calculated and checked the connections between stem and wedge not to disengage the stem from wedge while gate valve is working. The strength of stem and wedge connections is stronger than that of stem alone at the root of thread. STEM The packing size is designed to secure maximum tightness along the stem, and the standard packing is a non-asbestos type. We can supply any kinds of packing as required by customer.
UTAM VALVES
Utam Cast Steel Parallel slide blow off valves rack and pinion operated flanged ends to Bs 10 table"J" supplied with IBR test certification in form IIIc duly signed by director of boilers of punjab Max. Working Pressure :-24.7 kg/cm2(steam) Body Test Pressure :-400°CPNEUMATIC:- 36.9 kg/cm2(Hyd)
Ss Needle Valve
850 Per Piece
10 Piece (MOQ)
Features : Enhanced durability, Perfect design, Anti-corrosive .
Knife Gate Valve
Size : 2" TO 20" AVAILABLE.
BODY : C. I. OR M. S. OR S. S. 304 & 316 BODY.
ACTUATOR : PNEUMATICALLY OPERATED ALSO AVAILABLE
Knife gate valve are available from 2" to 20" size, various material of constructions and actuator options and ideal for controlling pulp stock, abrasive slurry, sludge, viscous media, chemical slurry, high temperatures services & etc.
pneumatic butterfly valves
Functioning efficiently from Gujarat(India), we are known for bringing forth quality products at competitive price. Our products are the preferred choice of many, as they are grade assured and as per international quality management systems.
Pneumatic Valve
20,000 Per Piece
Material : Carbon Steel, PP, Stainless Steel, UPVC
Color : Blue, Red, Sky Blue
Number Of Way : 2way
Type : Pneumatic Valves
Shape : Rectangular, Round, Square
Application : Gas Fitting, Oil Fitting
Feature : Blow-Out-Proof, Casting Approved, Durable, Eco Friendly, Investment Casting
End Connection : Butt Weld, Socket Weld Ends
Pattern : Plain
Pinch Valves
Material : Stainless Steel
Size : 15 mm to 50mm
Maximum Working Pressure : 25 Bar
Temperature Range : 300-400 Degree Celsius
Surface : Galvanized
Surface Finish : Powder Coated
We are the main supplier of this product.
Fluidrain Solenoid Valve
10,000 Per Piece
Pressure : 0-500bar
Valve Size : 1/2"- 1/8" inch
Frequency : 50-60Hz
Voltage : 12 - 380 VAC/DC
Valve Material : Brass and also available in Stainless Stee
Diaphragm Valves
Country of Origin : India
Type : Industrial Valves
SS Pendent 304 quality with inner side pipeline WFI PWI steam electricals with 316 L electro polish inside with diaphragm valve as per your design
pneumatic operated valve
Breather Valves
flush bottom tank valves
Industrial Valves
Garg lab glass industries is an illustrious manufacturers & suppliers of quality range of industrial valves in india.
Motorized control valve