Impact Testers Dealers

Aggregate impact testing machines are one of the most widely used and required testing machines which are used for the testing of the hardness and strength of the aggregate of different components. We are one of the most successful companies which are engaged in the line of work of manufacture, supply, distribution, export, wholesale, trade and retail of a wide gamut of various kinds of high quality mechanical and industrial equipments. These aggregate impact testing machines are one of the most demanded products of our company.   Features: Long lasting and durable Gives accurate results Simple to use Hassle free functioning Low consumption cost

NAUGRALABS LABORATORY PRODUCT NAME: STRIPPING VALUE APPARATUS FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-037009 Description and Specification for Lab Tenders For determining Stripping Value of bitumenous mixes having aggregate size 1.0mm to 75 microns.. Bitumen-Asphalt Testing Lab equipment manufacturers,exporters and Bitumen-Asphalt Testing Lab suppliers Salient Features :  A circular tray rotates in a vertical plane at a rate of approximately 100 r.p.m. by an eletrical geared motor. 4 bottles of approximately 400 cc are mounted on this circular tray at an angle of 90° to each other with their mouths towards centre of the tray. A time switch is provided. Suitable for operation on volts A.C. single phase. civil lab equipments manufacturers

This apparatus is used for measuring resistance of an aggregate to crushing. Made of mild steel, it comprises: Cylindrical Cell, 150 ± 0.5 mm ID x 130 to 140 mm height Plunger, 148±0.5 mm dia x 100 to 115 mm height Base Plate, 200 to 230 mm square x 6 mm thickness Tamping rod, 16 mm dia x 450 to 600 mm length Metal measure, 110 ± 0.5 mm ID x 180±0.5 mm height

We are well reckoned as one of the distinguished impact tester suppliers in India. The API pendulum impact testing machine determines the impact strength of standard tension-impact specimens. This high-precision pendulum impact tester measures the performance of plastics and composites according to ASTM and ISO test methods for Izod, Charpy and Tensile Impact. The automatic break prevents secondary strike impacts and allows variable starting angles to ensure optimal impact velocity. Siemens-based PLC and operator interface used for all calibration and test functions. ISO / ASTM conformance for all sample types. Izod, Charpy and Tensile Impact Testing available for high energy Impact. Testing up to 50 joules. Automatic brake system. Computerized operator interface. Cold box low temperature impact testing (optional). Digital clamping force adjustment for Izod testing (optional). Test reports available through serial printer port. Instrumented Impact hammers available for R & O applications. ISO 179,180,8256. ASTM 0256, 06110, 01822 and others.

We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India )   General Description The pendulum Impact Tester, Model IT-30 is designed for conducting Izod, Charpy test. The test methods confirm to BS : 131 : Part 4-1972 (Amended 15 Aug. 1993) BSEN : 10045-2 : 1993 The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for Izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale.(It is read on digital readout in case of electronic machines.)There are two strikers and one combined support available for fitting in to the pendulum and on to the base of the machine for the Izod, Charpy test respectively, Changing from one striker to another is achieved simply by fixing the new striker into its position.

Pneumatic Impact Hammers have many uses especially in the removal of tubes from a pressure vessel. If the tubes have been cut out and all you have left are the stub ends then using the collapsing tool with the impact hammer makes light work in removing the stub.The chisel end of the collapsing tool is forced down inbetween the tube and the tube sheet. The centre groove on the collapsing chisel forces the tube to collapse inwardly therefore releasing pressure on the tube sheet and breaking the seal.If the tube is thick walled then using the wall reducer will make the overall removal of the stub end much more easier.Tubes which are flush with the outside of the tube sheet can also be removed with the Knockout/Drift tools. These fit inside the tube or stub end and force the tube back through the tube sheet.

We are offering pipe impact testing machine. Falling height 2000mm height adjustment manually height adjustment resolution ± 2mm striker(dart) aluminum, s.s. (optional) striker (dart) weight as per standard striker (dart) release device pull release free falling mechanism diameter of test sample ø20mm to ø300mm sample clamping on 120° v block paint powder coated

Stationed in Delhi(India), our company is one of the most sought after entity in the industry. We have parted our infrastructure into several units and one of them is storehouse. We update it on regular basis so as to meet stated industry standards.   Note : BHI-PTE-1016 PENDULUM IMPACT TESTER

The aggregate impact value of coarse aggregate provides a relative measure of the resistance of an aggregate to sudden shock or impact. The oven dried and accurately weighed aggregates are subjected to a total of 15 blows of specified weight and fall and percentage of fines formed in terms of the total weight of the sample is expressed as the aggregate impact value. Consists of base weighing between 20-30 kg with a lower surface of not less than 30cm and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 + 5.0mm. The hammer is provided with a locking arrangement. A metal tup (hammer) weighing 13.5 to 14.0 kg, the lower end of in cylinderical shape, 100mm in diameter and 5cm long with a 2mm chamfer at the lower edge and case hardened. Complete with a cylindrical cup, 102mm dia x 50mm depth, one measure 75mm dia x 50mm deep and a tamping rod of circular cross section 10mm in diameter and 230mm long, rounded at one end. Optional Accessories : The following accessories are not part of the standard supply and are supplied at an extra cost. Test Sieve 10mm, 12.5mm and 2.36mm opening. Laboratory Oven. Automatic Blow Counter. Electronic Balance 500gm x 100 mg / Two Pan Balance.