Impact Testers Dealers

We are leading manufacturer, Supplier & Exporter of Aggregate Impact Tester. We manufacture Aggregate Impact Tester as per the set market standards. Aggregate Impact Tester manufactured by us generally used for determining the aggregate impact value.

We allow our patrons to make payment through a variety of methods. We are comfortable with patrons making payment through online or offline mediums that are legal and trusted. Situated in Delhi(India), the company has carved a niche for itself in the market with its flawless range of products.   Specification : Designed for conducting Izod & Charpy Test. Specs - charpy Test Izod Test Pendulum drop angle 140 deg. 85deg. Pend. Effective wt. 20.996kg 22.059kg Striking Velocity 5.3466m/sec 3.587m/sec Impact energy 300J 164J Min. scale graduation 2 J 2 J Distance of axis of P. Rot 825mm 825mm Max. permissible loss 0.5%. Striking edge angle 30 deg. 75 deg. Radius of Curvature 2.25mm 0.75mm Width 18mm

 Alpha Chem is manufactures,exporter & suppliers Aggregate Impact Tester.  Aggregate Impact Tester : The Aggregate Impact Tester is equipped with a circular base with two vertical guides. Aggregate Impact Tester machine which is available with us is fabricated using high grade raw material and advance technology. Features  Hammer with a locking arrangement Hammer is removable for emptying as it falls freely to the baseFalling height of hammer is adjusted through 380 ± 5mmSupplied complete with metal measures 75mm dia x 50mm high (for specimen preparation) and tamping rod 230mm long x 10mm dia High performance Weight of hammer : 13.75 ±0.25 kg.

The aggregate crushing value provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. The oven dried and accurately weighed aggregates are subjected to crushing test on compression testing machine and weight of the resultant fines passing the specified IS sieve to the total weight of the sample expressed a s a percentage is defined as Aggregate Crushing Value. The apparatus is available in three size 75mm dia for 18” to ¼” size aggregate, 150mm dia for 38” to ¾” aggregate (standard) and 300mm dia for 1” to 2” aggregate.

FOR DETERMING STRIPPING VALUE OF BITUMEN MIXES HAVING AGGREGATE SIZE 1.0MM TO 75 MICRONS. A CIRCULAR TRAY ROTATES IN A VERTICAL PLANE AT A RATE  IN A VERTICAL PLANE AT A RATE OF APPROXIMATELY 100 RPM BY AN ELECTRICAL GEARED MPOTOR . 4 BOTTLES OF APPROXIMATELY  400 CC ARE MOUNTED ON THIS CIRCULAR TRAY AT AN ANGLE 90 DEGREE TO EACH OTHER WITH THEIR MOUTH TOWARDS CENTRE OF THE TRAY . A TIME SWITCH IS PROVIDED SUITABLE FOR OPERATION ON 230VOLTS A.C. SINGLE PAHSE .

We are renowned manufacturers and suppliers of Impact testing machines. Impact is a very important phenomenon in governing the life of a structure. Impact tests are used in studying the toughness of material. A material’s toughness is a factor of its ability to absorb energy during deformation. Brittle materials have low toughness as a result of the small amount of deformation that they can endure. The impact value of a material can also change with temperature. Generally, at lower temperatures, the impact energy of a material is decreased. The size of the specimen may also affect the value of the Izod impact test because it may allow a different number of imperfections in the material, which can act as stress risers and lower the impact energy.   PRC offers Digital Impact Testers for both types of tests i.e. Izod & Charpy Impact Testing. Impact resistance is one of the most important properties for component designers to consider, as well as the most difficult to quantify. Impact resistance is a critical measure of service life and it involves the perplexing problem of product safety and liability. Keeping in view this fact, PRC has designed this system by which an accurate and precision impact testing can be done. Charpy Impact Testing Machine works on pendulum principle. In this test, the difference between the height of drop of the pendulum before rupture of material and the height of the rise after rupture of the specimen is directly proportionate to the impact energy absorbed by the specimen is directly indicated by the digital indicator. The impact test performed by this machine is for metallic materials. The test consists of: Breaking by one blow from a swinging pendulum, under conditions defined by ASTM standard. A test piece notched in the middle and supported at each end. The energy absorbed is determined in joules and this absorbed energy is a measure of the impact strength of the material. Salient features:   Measuring range of 200 to 500 Joules (or customized range of measurement) Designed as per ASTM standard Digital Display Printout of test data facility (optional) Pendulum release by “One Hand Operation” Lifting arrangement of Pendulum “Electro-Mechanical” Rigid & robust construction to suit the Indian environmental conditions Precision & accurate measurement Izod & Charpy both type of test facility Reliable & dependable Digital or computer controlled measurement Computer connectivity & Printout facility (optional)

The efficient Tubular Impact Tester is used to determine the impact resistance, surface damage and penetration by a falling weight, as most protective coatings and constructional material must be tested properly. Our Tubular Impact Tester is offered at the market leading prices. Used For PaintsPlatingPlasticsVarnishesPlastic CoatingsResins/ compositesCoil coatingLaminationsSheet materialsMetals Standard Models Model: 806/25: As per BS 6496, ASTM D 2794Model: 806/40: As per ASTM D 2794Model: 807: As per ISO 6272, BS 3900: E13

NAUGRALABS LABORATORY PRODUCT NAME: AGGREGATE IMPACT TESTER FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-036002 Description and Specification for Lab Tenders Aggregate Impact Tester.  Salient Features The instrument consists of a circular base with two vertical guides. The hammer of weight 13.75 0.25 kg can be raised to fall freely down the vertical guides.  Material Testing Lab equipment manufacturers,exporters and Material Testing Lab suppliers  The height of fall can be adjusted through 380 ± 5mm.  The hammer is provided with a locking arrangement. The hammer falls freely to the base and is removable for emptying. Supplied complete with metal measures 75mm dia x 50mm high (for specimen preperation) and tamping rod 230mm long x 10mm dia. civil lab equipments manufacturers

This apparatus is used to measures resistance of an aggregate to crushing under a gradually applied compressive load.   As per IS: 383 This apparatus is used to measures resistance of an aggregate to crushing under a gradually applied compressive load. Specifications : Consists of M.S.Cylindrical container 150 mm ±0.5mm dia x 130mm to 140mm high with base plate 200 to 230 mm./sqr x 6mm thick. A plinger of 148mm ± 0.5mm dia x 100 to 115mm high. Supplied complete with tamping rod, 16mm dia x 600mm long, one end rounded. And 1 no. Metal measure 115 ± 0.5mm dia x 180 0.5mm high

avail the model no : mit-30 (d) of impact testing machine. Manufactured with precision, this impact testing machine is relied for providing precise results in conducting several tests. special features it-30 - suitable for izod and charpy tests as per is-1598, 1499 & 3766 and bs:131 parts 1, 2, 3, & 4.digital facility

We are identified as one of reputed Impact Testing Machine Suppliers in the national market. Our Impact Testing Machine is designed with utmost precision to conduct Izod & Charpy Test. The Impact Testing Machine, offered by us is ideal to test the resistance of metal and various other alloys to external impacts. General Description Our highly efficient Pendulum Impact Tester Model MCS-IT 30 is developed for conduction Charpy and Izod Test. Herein, the test methods comply with BS: 131: PART 4-1972 (Amended 15 Aug. 1993) and BSEN: 10045 - 2: 1993. The Pendulum Mounted on friction resistance bearings, the pendulum has two starting positions. The lower position is for Izod and the upper one is for Charpy Testing. When released, the pendulum swings down breaking specimen and rendering energy that is absorbed, which is measured as the difference between the height of drop before and after rupture as the test specimen. This is notified from the maximum pointer on the dial scale. Izod Test The Izod test piece is fixed upright in Izod support anvils, fixed on the lower part of the machine. Herein, the support is given with machined vertical groove that suits the test piece size. The alien screw and front clamp piece empowers fixing test piece on precise height by the help of Izod setting gauge. Charpy Test The Charpy test piece relaxes on alloy steel that supports anvils fixed on the base of the machine that stiffly held in position through alien screws. Herein, the end stopper available for precise and quick placing of test piece in between the supports. Controls of Pendulum The Pendulum supported in the starting positions is by a self-resetting latch. The release mechanism is operated by lever. The Pendulum release latch is operated only when this lever is operated. Strikers & Supporters Apart from strikers, there is one combined support that is provided for fixing to the base of the machine for Charpy and Izod Tests and Pendulum. New striker is fixed in to its position to achieve charging. Optional Accessories Available U - notch milling cutterV - notch milling cutterCaliper gauge for checking V notch for Charpy and Izod according to BS:131 :PART 1, 2, 3Depth notch gauge that includes V & U notch, radius and angleSelf-centering tong

The Falling Dart Impact Tester is intended for the determination of mechanical properties of packaging material such as plastic films, laminates and paper.The tester comprises a horizontal base-plate on which a vertical column of steel has been erected and which on its top carries a release mechanism in which the falling dart can be inserted. The Falling Dart Impact Tester is intended for the determination of mechanical properties of packaging material such as plastic films, laminates and paper. ASTM Standard D 1709-62 Procedure A.