Bonding Agents Dealers in Mumbai

MagicBond Block Joining Adhesive is a thin bed mortar with high strength attributes for quick & firm laying of AAC blocks. It is a factory mixed mortar made up of cement, graded sand and blended with polymers to impart high strength and water retention properties even when in thickness of 2-3 mm layer.

• Type: Liquid
• Purity: 100%
• Strength: Optimum
• Performance: Premium Quality
• Features: Long functional life
• Speciality: Highly effective
• Grade: Superior
• Chemical Name: ZC-SEALTITE

DESCRIPTION ZC-SEALTITE is an aqueous Co-polymer emulsion specially formulated for use with cement.  ZC-SEALTITE modifies the property of cement in mortars and in concrete to make them  perform better in terms of water proofing, repair, corrosion inhibition, bonding, durability and wear resistance .   PRIMARY USES Corrosion protection of steel. Floor screed and topping. Concrete and floor screed repairs. Water proofing and tanking of basements. Bonding old concrete to new concrete.   ADVANTAGES Water resistant, excellent adhesion to concrete, steel, brick, stones, compatible with cement. High compressive, tensile and flexural strength. Resistant to ingress of salts, mineral oils etc. Non toxic. Suitable foruse in potable water tanks. Excellent corrosion protection. Economical when compared with epoxy mortars.   TYPICAL APPLICATONS Corrosion Repairs of Beams, Columns and Slabs: Industrial Floor or Floor Duct Nosing Repair: Bonding old Concrete to New Concrete: Plaster & Screed Mortars:

• Brand Name: Samrat gypsum
• Purity: 99%
• Packaging Type: Plastic Packet
• Type: Gypsum Plaster
• Color: Green
• Condition: Liquid paste
• Form: Liquid paste
• Certification: ISO 9001-2008 Certified

Gypsum Bonding Agent is a single component bonding chemical specially formulated to achieve a strong bond between RCC (concrete) surface and gypsum plasters. It offers a strong chemical and mechanical bonding between the RCC surface and gypsum.

• Application: Waterproofing
• Packaging Type: 1-5L, 5-10L
• Type: Bonding Agent
• Shelf Life: 6Months
• Other Names: SBR Waterproofing Chemical
• Appearance: Green Color Thick Liquid
• Country of Origin: India
• Coverage: 4-5 Sq.M/kg

MCON ULTRA GYPBOND is polymer based coarse coating to perform as a bonding agent to create strong bond of Gypsum Plaster on any cementitious substrate including high quality concrete surfaces. It comes in Green color and hence is easily traceable for application. It provides a strong chemical bonding coat and also a mechanical bonding substrate. 

• Adhesive: Pressure Sensitive
• Form: Liquid
• Purity: 90%
• Color: Transparent
• Application: Bathrooms, Ceramic, Tiles, Wood
• Material: Adhesive, BOPP Film, Tile Adhesive
• Type: Adhesives
• Brand Name: Covestro

 adding of Desmodur® RFE, the ready-to-use two-component adhesive must be used within its pot life. This is not only governed by the polymer content of the adhesive but also by its other components (resins, antioxidants, plasticisers, solvents, etc.). At the end of the pot life, usually several hours or one working day, the adhesive becomes increasingly difficult to work and its viscosity increases rapidly. Finally, irreversible gelling occurs. The following guide values can be used in determining the addition by weight. To crosslink 100 pbw adhesive: Desmocoll® (hydroxyl polyurethane) 4 - 7 pbw Desmodur® RFE (polyurethane content approx. 20 %) Baypren® (chloroprene rubber) 4 - 7 pbw Desmodur® RFE (rubber content approx. 20 %)

• Brand Name: Perma Bond - AR

We are offering construction adhesives. perma boand-ar is an aqueous emulsion of acrylic copolymers specially formulated for use with cement. Perma bond-ar modifies the property of cement in mortars and in concrete to make them perform better. primary uses corrosion protection of steel repairs of structural members repairs of industrial floors water proofing of basements tanks by tanking repairs to marine structures preparation for various applications perma bond-ar is used in the iorm of bonding slurry and as an additive in the modified mortar bonding slurry. It is obtained by mixing one volume of perma bond-ar with one and halt volume of cement. This bonding slurry is applied immediately within twenty minutes of preparation. modified mortar mix design opc 50 kgs zoneii sand 150 kgs perma bond-ar 10 litres water 8 to 10 litres yield 112 litres dosage 5 to 10 litres per 50 kgs bag of cement depending upon application and severity of problems direction for use on a cleaned and prepared wet surface apply perma bond-ar slurry by brush. When the perma bond-ar slurry is still green and tacky apply modified mortar and trowel it. Care should be taken to apply modified mortar fast after application of bonding slurry as the bonding slurry has a tendency to dry out fast in hot weather typical application corrosion repair of beams, columnsandslabs remove the cover concrete and cut back to the sound concrete zone. Remove all rust from the reinforcement by mechanical means. Apply one coat of "rust remover" by brush on the steel apply passivalar coat to the reinforcement in the ratio of l volume perma bond-arto1volume of cement next day apply one coat of perma bond ar bonding slurry when the bonding slurry is still tacky apply perma bond-ar modified mortar to a thickness of 20mm moisture cures for 24 hours and allow it to dry off packing perma bond-ar is available in 500ml 1ltr shelf life 12 months from the date of manufacture if stored in a cool, dry place in original packing quality assurance should you find the behavior of the product different from the normal feel or the claims with the literature, stop the use of the product, cordon off all such product and inform perma with a complaint letter stating the problem, batch number etc. Lf the product is used in spite of observed variance the responsibility shall be with the user.

Ascolite mortar is a semi premix high quality mortar for jointing and bonding of aac blocks, concrete blocks, hollow blocks, clay bricks and fly ash bricks. Ascolite mortar semi premix consists of cement, graded sand and specialised polymers which combine to give superior strength, water retention and stability. It replaces the conventional method and material of jointing mortar which requires a 12-18 mm thickness with a revolutionary 2-3 mm joint thickness. Ascolite mortar only requires addition of water before application to prepare the product for use, reducing the hassle of measuring and maintaining various individual elements to create a conventional mortar. Standard specification code followed is astm c1660-09.

• Packaging Type: Bucket
• Packaging Size: 20 Kg

• Brand Name: Astra
• Application: Carton Sealing
• Application: Fixing
• Place of Origin: Maharashtra, India
• Port: Nhava Sheva
• Color: Brown
• Adhesive Side: Single Sided
• Adhesive Type: Hot Melt
• Packaging Details: 30 kgs multi walled paper bags lined with high density polyethylene (HDPE) and an inner PP liner.
• Adhesive: Acrylic
• Feature: Waterproof
• Material: BOPP

Keeping in mind the diverse requirements of our customers we are involved in offering a broad variety of Adhesive and Bonding Agent. The offered product is formulated by trained professionals using finest quality ingredients and high-tech technology. We modify our range as per the details given by clients and offer them within devoted time frame.

Metal bonding adhesives, Anabond’s Anaerobic Adhesives & Sealants are single part acrylic ester based 100% reactive system, which cures in the absence of air and in presence of metal. Excellent vibration, heat, oil & chemical resistance characterize the cured adhesive. They are high performance compounds possessing very high adhesive strength.

• Appearance: Clear liquid
• Color: Clear
• Packaging Type: Bottle: 20 G- 50 G per box
• Product Features: High strength, Used for bonding porous and non-porous materials, Unique fast setting strong bonds on a wide variety of substrates. (helps therefore faster production on assembly line, Solvent less
• Cure time: 24°C 24 hours
• Extrusion Rate: 350 g/min
• Tack Free Time: 5-7 min
• Areas of Application: Rubber, Leather, Rexene, Wood, Metal, Ceramic, PVC, Plastic, Glass, Porcelain glass-dissimilar products

Jk-resin-hmm is highly stable material used as a bonding agent in epdm rubber.

Books,bindingmaterials,ballpens,machinery,parts files,plastic files manilapapers,boards,colour papers,.

Adhesive Bond, Trigger Spray, Rubic Cube Toy, Kids Piggy Bank, Hair Trimmer

Sunanda - Our company is counted amongst the foremost manufacturers & exporters, wholesalers and suppliers of bonding agents in India.