Use of Agitated Thin Film Dryer & Multiple Effect Evaporators reduces the operating and disposal cost.
Use of Forced Circulation Evaporator minimize scalling effect.
Use of Agitated Thin Film Dryer & Multiple Effect Evaporators reduces the operating and disposal cost.
Use of Forced Circulation Evaporator minimize scalling effect.
Below are the product details of Rotary Piston Vacuum Pump
Models: KT-150C KT-300D KT-500D KT-850D
Features:
Full pumping speed down to 1 Torr
Can operate continuously (at any pressure) up to 100 Torr
Ultimate pressure 10 Microns (McLeod Gauge)
Adjustable gas ballast permits handling of condensable vapors
No metal to metal contact in pumping chamber
Unequaled durability, even in dirty applications
Compact footprint design
Simple installation, no special preparations required
Triplex piston design provides quiet, vibration-free operation
Below are the product details of Rotary Piston Vacuum Pump
Models: KT-150C KT-300D KT-500D KT-850D
Features:
Full pumping speed down to 1 Torr
Can operate continuously (at any pressure) up to 100 Torr
Ultimate pressure 10 Microns (McLeod Gauge)
Adjustable gas ballast permits handling of condensable vapors
No metal to metal contact in pumping chamber
Unequaled durability, even in dirty applications
Compact footprint design
Simple installation, no special preparations required
Triplex piston design provides quiet, vibration-free operation
Model: fr1118p10
the sotera in-line digital meter is an economical choice for metering the transfer of water, diesel exhaust fluid (def), or detergents. It's easy to handle and easy to use. It can be installed in line or at the end of the hose.
using a turbine measuring system, the fr1118p10 provides the ability to dispense liquids with convenience and accuracy, and the five-digit lcd readout is a consistent performer under the toughest conditions.
when you need a value priced meter, look no further than the fr1118p10.
features and benefits
3 - 26 gpm (11 - 98 lpm)
70 psi (4,8 bar)
1 in. Npt inlet and outlet
five digit readout with resettable totalizer
+- 1% accuracy
turbine measuring system
one year warranty
install either in-line or at the end of the delivery hose
made out of nylon 66
measures in gallons, liters, quarts and pints
compatible with water, diesel exhaust fluid (def), or detergents
documents
Model: fr1118p10
the sotera in-line digital meter is an economical choice for metering the transfer of water, diesel exhaust fluid (def), or detergents. It's easy to handle and easy to use. It can be installed in line or at the end of the hose.
using a turbine measuring system, the fr1118p10 provides the ability to dispense liquids with convenience and accuracy, and the five-digit lcd readout is a consistent performer under the toughest conditions.
when you need a value priced meter, look no further than the fr1118p10.
features and benefits
3 - 26 gpm (11 - 98 lpm)
70 psi (4,8 bar)
1 in. Npt inlet and outlet
five digit readout with resettable totalizer
+- 1% accuracy
turbine measuring system
one year warranty
install either in-line or at the end of the delivery hose
made out of nylon 66
measures in gallons, liters, quarts and pints
compatible with water, diesel exhaust fluid (def), or detergents
documents
SpecialitiesShort gas path through the pump for quick discharge.
Dry vacuum pumps Simple, robust design can handle process by-products liquids, condensate, and even small particles No oil or water in contact with process No contact between operating components in the casing Full pumping speed from atmospheric pressure down to 1 Torr; ultimate pressure 0.1 Torr (.05 Torr on Model KDP-800) Quiet operation – less than 85 dB(A) Short gas path through the pump for quick discharge Extended shaft for either V-belt or direct drive Casing and rotors are made of ductile iron, PFA coated.
Dry vacuum pumps Simple, robust design can handle process by-products liquids, condensate, and even small particles No oil or water in contact with process No contact between operating components in the casing Full pumping speed from atmospheric pressure down to 1 Torr; ultimate pressure 0.1 Torr (.05 Torr on Model KDP-800) Quiet operation – less than 85 dB(A) Short gas path through the pump for quick discharge Extended shaft for either V-belt or direct drive Casing and rotors are made of ductile iron, PFA coated.
Specialities : Short gas path through the pump for quick discharge.
The dry screw pump design is based on the operating principle of screw but with twin screws to achieve the required compression.
Two single-piece, parallel, twin screws contained in a pump body, compresses & transfers the gas by rotating twin screws. The pump body is cooled by water circulating through a jacket, cooling the compressed gas to discharge at low temperature.
The temperature of the pump can be adjusted for process requirements by controlling the water flow rate and temperature. This will raise or lower the overall operating temperature of the gases being pumped.
The compression ratio of the pump varies little over the operating pressure range, giving constant absorbed power. This enables the condition of the pump to be diagnosed by monitoring motor current.
The dry screw pump design is based on the operating principle of screw but with twin screws to achieve the required compression.
Two single-piece, parallel, twin screws contained in a pump body, compresses & transfers the gas by rotating twin screws. The pump body is cooled by water circulating through a jacket, cooling the compressed gas to discharge at low temperature.
The temperature of the pump can be adjusted for process requirements by controlling the water flow rate and temperature. This will raise or lower the overall operating temperature of the gases being pumped.
The compression ratio of the pump varies little over the operating pressure range, giving constant absorbed power. This enables the condition of the pump to be diagnosed by monitoring motor current.
FEATURESOperating pressure as low as 0.001 mbar. hence product can be distilled at lower temperature to avoid degradation.
Short Path Distillation Unit Operating principle of short path distillation unit (SPDU) is similar to thin film except internal condenser. Here internal condenser is installed inside rotor cage assembly. The feed enters the unit at top and get distributed into a thin film on the inside surface of shell. Heating medium passing through the jacket evaporates volatile component in feed. The vapor generated flow across the rotor and condense on internal condenser. This short path of vapor eliminate pressure drop. hence evaporation can be done at high vacuum as 0.001 mbar. The distilled product and balance bottoms are taken out through separate outlets.
Short Path Distillation Unit Operating principle of short path distillation unit (SPDU) is similar to thin film except internal condenser. Here internal condenser is installed inside rotor cage assembly. The feed enters the unit at top and get distributed into a thin film on the inside surface of shell. Heating medium passing through the jacket evaporates volatile component in feed. The vapor generated flow across the rotor and condense on internal condenser. This short path of vapor eliminate pressure drop. hence evaporation can be done at high vacuum as 0.001 mbar. The distilled product and balance bottoms are taken out through separate outlets.
Secondary Business TypeManufacturer / Exporters / Wholesale Suppliers
Year of Establishment1926
No. of Employees51 - 100
Annual TurnoverRs. 25 to 50 Crore Approx.
Ownership TypeCorporation/Limited Liability Company
Opening Hours
SUN : Closed
MON : 9:30 AM - 6:30 PM
TUE : 9:30 AM - 6:30 PM
WED : 9:30 AM - 6:30 PM
THU : 9:30 AM - 6:30 PM
FRI : 9:30 AM - 6:30 PM
SAT : 9:30 AM - 6:30 PM
conomy Refrigeration Pvt. Ltd. founded in 1926, has grown to a position of leadership among engineering companies. The Company’s beliefs and values have been the corner stones on which it has built a durable and growing business. The company has spearheaded technological change in all the activities that it is engaged in today: fabrication, engineering, designing and marketing. We manufacture sophisticated ,state of the art systems . The range includes equipment designed and fabricated indigenously as well as in collaboration with some of the world’s leading manufacturing companies. We have been appointed engineers and contractors for major turnkey projects, not only in India but also overseas. The Company puts a premium on serving customers better. At the corporate level, we operate through various Products Groups, supported by a dedicated team of engineers in the field providing comprehensive pre-sales and post-sales service through a network of offices nationwide. We are an ISO 9001-2008 Company , having our registered office at Fort, Mumbai and Sales Office in Bhiwandi near Thane. Our operations are in the following product categories: • Blower and Blower packages • Vacuum Pumps & Vacuum Systems • Process Equipment • Fuel Transfer Pumps & Flow Meters • Process pumps • Food and Pharma equipment We are committed to invest, diversify and expand our operations in terms of volume and quality and help engineer strong and prosperous relationships with our customers.