Post Free Ad Sign Up

Heating Components & Spares Dealers in Borivali East, Mumbai

(15 products available)
Borivali East Andheri Dahisar Andheri East Goregaon Kalbadevi Fort Borivali Mulund Bhandup West Malad West Chembur Jogeshwari Mahim Sewri Vile Parle Andheri West Dombivali Masjid Bunder Midc
  • Solar Heat Pump

    Solar Heat Pump

    Get Price Quote
    • Number Of FlowerHeat Pumps
    • ApplicationWater Heating
    • Availability24 X 7
    • ShapeCompact
    • Electrical ConsumptionVery Low, Industry Standard
    • MaintenanceLow, Industry Standard
    • A heat pump is a device that transfers heat energy from a source of heat to what is called a thermal reservoir. Heat pumps move thermal energy in the opposite direction of spontaneous heat transfer, by absorbing heat from a cold space and releasing it to a warmer one. A heat pump uses external power to accomplish the work of transferring energy from the heat source to the heat sink. [1] The most common design of a heat pump involves four main components – a condenser, an expansion valve, an evaporator and a compressor. The heat transfer medium circulated through these components is called refrigerant.While air conditioners and freezers are familiar examples of heat pumps, the term & heat pump & is more general and applies to many heating, ventilating, and air conditioning (HVAC) devices used for space heating or space cooling. Heat pumps usually can be used either in heating mode or cooling mode, as required by the user. When a heat pump is used for heating, it employs the same basic refrigeration-typ cycle used by an air conditioner or a refrigerator, but in the opposite direction – releasing heat into the conditioned space rather than the surrounding environment. In this use, heat pumps generally draw heat from the cooler external air or from the ground.Heat pumps are also increasingly used to heat domestic hot water, the hot water used for kitchens, bathrooms, clothes washers, etc. Heat pumps are significantly more energy efficient than simple electrical resistance heaters. This efficiency however begins to decrease as the outside temperature decreases, making them more efficient in hotter climates than cooler ones. The typical installation cost is also higher than that of a resistance heater.Benefits-Very Low ElectricalConsumption 24 x 7 availability of hot water with fixed temperature.400% higher efficiencyCompact in shape1/10 of power consumption compared to any other electric geyser.Low maintenance
    ...more

    Kavish Eco Energy Solutions

    Borivali East, Mumbai
    13 yrs
  • Planchet Heating

    Planchet Heating

    Get Price Quote
    • ApplicationFOR HEATING PLACHETS
    • Planchet Heating Machines are used for heating of small planchet which are having preloaded samples. During the Heating, volatile components will be evaporated, nonvolatile components can be used for the further analysis.     Features:-       Uniform center to periphery planchet heating within 15 sec.   Consistency in heating through Induction Heating.   Faster temperature rise.   Simplicity in operation.   Process is more than 85% efficient.   Induction power sources will be 95% efficient.   Input current will not exceed 3 Ampere.   Digital timer for heating cycle adjustment.   Foot switch operation is also possible.   Induction generator & Inductor is separated with 2 meter extension cable.   Tropicalised design    
    ...more
    www

    Microtech Inductions (India) Pvt Ltd.

    Dahisar, Mumbai (2.2 km from Borivali East)
    GST 17 yrs 4.7 (29)
  • Planchet Heating

    Planchet Heating

    Get Price Quote
      Planchet Heating   Uniform center to periphery planchet heating within 15 sec.   Consistency in heating through Induction Heating.   Faster temperature rise.   Simplicity in operation.   Process is more than 85% efficient.   Induction power sources will be 95% efficient.   Input current will not exceed 3 Ampere.   Digital timer for heating cycle adjustment.   Foot switch operation is also possible.   Induction generator & Inductor is separated with 2 meter extension cable.   Tropicalised design
    ...more

    Microtech Induction Pvt. Ltd.

    Dahisar, Mumbai (2.2 km from Borivali East)
    8 yrs
  • Waste Heat Recovery Thermic Fluid Heater

    Waste Heat Recovery Thermic Fluid Heater

    Get Price Quote
    ENERGYPACK has developed thermic fluid heater with utilization of waste heat from exhaust gases of DG set, Incinerator, Producer gas etc.

    Utech Projects Pvt Ltd

    Kandivali, Mumbai (1.6 km from Borivali East)
    13 yrs
  • Mica Heating Plate

    Mica Heating Plate

    200 / Box
    • MOQ100 Box
    • Thickness5mm
    • Length180mm
    • Power200W
    • Rated Voltage220V
    ...more

    Ambica Mica Traders

    Dahisar, Mumbai (2.2 km from Borivali East)
    15 yrs
  • Silicon Carbide Rod

    Silicon Carbide Rod

    300 / Piece
    • MaterialSilicon Carbide
    • Length4000 mm
    • FeaturesSplendid design, Smooth surface, Excellent strength, Competitive price, High sturdiness
    • Diameter50 mm
    • TemperatureUp to 1600 Degree C
    • Packaging TypePacket
    ...more

    Shiv trading company

    Dahisar, Mumbai (2.2 km from Borivali East)
    10 yrs
  • Silicon Carbide Rods

    Silicon Carbide Rods

    700 / Piece
    • MaterialSilicon Carbide
    • Length200 mm - 4500 mm
    • FeaturesSplendid design, Smooth surface, Excellent strength, Competitive price, High sturdiness
    • Usage/ApplicationFurnace Heating Elements
    • Diameter14 mm - 54 mm
    • Maximum temperatureUp to 1600 Degree C
    • ShapeSolid, Dumble, U, Sprial
    ...more

    National Enterprise

    Kandivali, Mumbai (1.6 km from Borivali East)
    14 yrs
  • Thermic Fluid Heater

    Thermic Fluid Heater

    Get Price Quote
    • MaterialMild Steel
    • CertificationCE Certified
    • ApplicationIndustrial
    • OrientationVertical
    • Usage/ApplicationHeating
    • QualityOptimum Quality
    • Fluidtherm, Thermic fluid heater, consists of two concentric coils in which inner coil acts as a radiation zone and outer coil act as a convection zone.Flue gas velocity is generally higher between the 2 coils and between the coil and the outer shell, so higher the velocity higher will be the convective heat transfer between the flue gas and fluid.Thermic fluid heaters can be made either 3 pass or 4 pass depending on the design of thermic fluid heater and the type of fuels to be burnt. The efficiency of the heater increases with an increase in the number of passes.Working Process Of Thermic Fluid Heaters :The maximum temperature of 350℃ of thermal fluid can be achieved in a Fluidtherm although the higher temperature of the thermal fluid can be achieved provided the temperature of fluid does not exceed the auto-ignition temperature. Thermic Fluid Heater also consists of a deaerator and expansion tank.The density of fluid decreases with increase in the temperature of fluid so a tank is generally installed in a process to help accommodate the extra volume of fluid which is increased due to increase in the fluid temperature. For every 100℃ rise in the fluid temperature, the volume of fluid increases by 7% so expansion tank is added to take care of that extra volume.Deaerator tank is combined with the expansion tank and is generally used to vent out air from the fluid which acts as resistance in transferring heat to the fluid. Industrial Thermic Fluid Heater Fuels.Fluidtherm, Thermic heating system made by used to burn the different type of fuels such as:-Solid Fuels : Wood, Coal, Petcoke, Rice husk, etc.Liquid Fuels : Light Diesel Oils, Heavy Oils, etc.Gaseous Fuels : Natural Gas, Liquefied Petroleum Gas, etc.Advantages of Thermic Fluid Heaters: High Capacity Heating System Fully automatic unit – Maintains the desired temperature of the thermic fluid High System Efficiency – Reduced operating cost. Best applicable for High-Temperature Heating Can attain temperatures upto 300 o C Minimum site work and ease of installation Can operate on the variety of fuels as per local availability Failsafe design and dependable safety instruments Rugged design and superior construction High flow rate ensures the higher life of thermic fluid and heater coil Backed by prompt and efficient after sales service Deaerator/Expansion Tank Integral Arrangement type Fluidtherm Capacity Fluidtherm is available in capacities from 1 Lac Kcal/hr to 10 Lac Kcal/hrQuality:Our Thermic Fluid Heaters and Steam Boiler has best Quality of inputs like Seamless Pipes for coil, High Tensile Fasteners, SS Reflector Shell, and other components are bought from best of the brands like Siemens, Bharat Bijlee, Finolex, English Electric, fenner, Indofoss. Thereby making these units very strong and long lasting.
    ...more

    Sanjivan Industries

    Dahisar, Mumbai (2.2 km from Borivali East)
    GST 18 yrs
  • FLEXIBLE HEATING TAPES

    FLEXIBLE HEATING TAPES

    Get Price Quote
    Uses : Flexible heating tapes are used for heating glass column pipes, condensor or any metal pipe. As the name suggests it is flexible indeed. It can take any shape depending upon shape of the vessels or it can can be wrapped around. This heater is ideally suited for heating at low temperature.Construction : Flexible heating tapes are made up of knitted fibre glass yarn with heating element in side. It is completely insulated & provided with connecting lead wire. This heater can be easily, installed & removed.Electrical Data :  Generally 230 volts A.C. is given & 100 to 200 watts per meter is provided. This heater can also be manufactured with desired specifications to suit to one's requirement.Temperature :  Maximum surface temperature can go up 350°C. But it is advisable to use this heater for heating upto 200°C. Exact temperature can be controlled by means of external energy regulator.While Placing Order : Please mention diameter, length, wattage, voltage, lead wire length, special features if any.
    ...more

    CHETAN ELECTRIC INDUSTRIES

    Borivali West, Mumbai (1.7 km from Borivali East)
    8 yrs
  • Heating Equipment

    Heating Equipment

    Get Price Quote
    Heating Equipment, Dial Thermometers, Solar Photovoltaic Module

    Waaree Group

    Borivali East, Mumbai
    23 yrs
  • Gas Fired Thermic Fluid Heater

    Gas Fired Thermic Fluid Heater

    Get Price Quote
    Gas Fired Thermic Fluid Heater, Thermic Fluid Heate

    Sadanand Approtech Pvt. Ltd.

    Dahisar, Mumbai (2.2 km from Borivali East)
    13 yrs
  • Thermic Fluid Heaters

    Thermic Fluid Heaters

    Get Price Quote
    Thermic Fluid Heaters, Steam Boilers, Hot Water Boilers, Pressure Vessel

    Meru Corporation

    Borivali East, Mumbai
    13 yrs
  • Heating Equipment

    Heating Equipment

    Get Price Quote
    • The heating torch body is manufactured using forged brass jet with heavy duty brass pipeIdeal to heat mild steel
    • Comes along with 1 type of nozzle with OD 38 mm and multiple nozzles tooNozzles are zinc plated manufacted using mild steel (MS)
    • Heating equipment for lpg/ cng pipeline are manufactured using forged brass which ensures speed, safety and convenience to the operators. This sturdy lpg/cng heating torch is resistant to high temperatures and is meant for performing heating applications like brazing, pre heating, pipe bending, soft soldering and hardening. This heating torch can be availed in different lengths and multiple nozzles.
    ...more

    Speciality Safety Engineers

    Borivali West, Mumbai (1.7 km from Borivali East)
    11 yrs
  • Thermic Fluid Heaters

    Thermic Fluid Heaters

    Get Price Quote
    Thermic Fluid Heaters, Burners, Steam Boiler

    STEAM CARE ENGINEERS

    Dahisar, Mumbai (2.2 km from Borivali East)
    18 yrs
  • Thermic Fluid Heaters

    Thermic Fluid Heaters

    Get Price Quote
    Thermic Fluid Heaters, Textile Machinery, Hot Air Stente

    Harish Corporation

    Dahisar East, Mumbai (2.3 km from Borivali East)
    24 yrs
Filter by Locality

GENERAL LINK

Top Cities (India)

Mumbai Localities

top