Spring Seals Dealers in Jogeshwari West, Mumbai

Series 12W are general purpose multi coil spring unbalanced seals. These seals are provided with O-Ring Sealing device due to its compact design and narrow cross section, these seals occupies very less area in stuffing box. Lower spring loads provided through wedge or O-Ring minimizes shaft fretting. One can easily assemble and dismantle these seals through the circlip provided. These seals can be changed to balance version of its type merely by changing the carbon face only & can be provided with single, double or tandem arrangement with external seal support system and devices.

We are offering Single Spring Mechanical Seal. Applications Generally used in sewage application, waste water pumps & fuel injection pumps Operating Limits Shaft Dia. : 10 to 100mmPressure : up to 10 BarsTemperature : -20 to 150 C.

We also offer Multi Spring Reversed Balanced Seal that can be externally mounted and is internally balanced with multi- coil spring seal. These are made from high quality of raw material which ensure durability at its user end.   Item Code: LS24R   Type LS24R is externally mounted internally balanced multi spring seal. The unique feature of this type of seal is that, it eliminated the shaft step or sleeves for balancing. These seals are externally mounted & hence the metal parts including the springs do not come in contact with the circulating media & therefore can be use for corrosive or abrasive media sealing. The compact design eliminates the requirement of extra radial & axial space for its installation.   Applictions : Generally used for handling corrosive chemicals, hydrocarbons, general & light chemicals.   Materials: •   Seal Faces : Sic/carbon vs Ceramic/Sic./TC •   Secondary Seals : Viton/PTFE/GFT •   Metal Components : 55-316   Operating Limits : •   Shaft Dia. : 10 to 100mm •   Pressure : up 10 10 Bars •   Temp. : -50 to 180°C •   Speed : up to 25 m/s

Face Materials:      Carbon/Stellite / Lecrolloy / Ceramic / Silicon Carbide / Plasma Sprayed Ceramic Metal Parts:            SS 316, SS 304 Secondary Seal:      Nitrile, EPDM, Viton, PTFE Applications IndustrialMarine Seal Characteristics: Single actingBalanced / UnbalancedInside & Outside MountedIndependent of direction of rotationTorque Transmission by Secondary seal Operating Limits: Shaft Diameter d1 : 10 ... 100 mmPressure p : 10 bar (max)Temperature t : – 20 ... +180O CVelocity v : 10 m/sec>This seal has self aligning feature which compensate abnormal shaft end play and run out, which leads to improved service life. Secondary seal protect shaft and sleeve from fretting. Drive to the seal faces is given through notches - provided on retainer. Seal can be repaired in field with minimum spares minimising the down time cost

These type Multi Spring Seal is generally used in ash slurry pulp, clinker grinder, sludge & syrup. Materials Seal Faces: Si Ceramic Carbon TC Vs Ceramic TC Si Secondary Seals: Elastomers FEP PTFE GFT Metal Parts: SS-304, SS-316, SS-316L Operating Limits Shaft Dia: 10mm to 150mm Pressure: 10 Bars (max) Temperature: -50°C to +180°C Speed: 1500 rpm (max)

We are offering a wide range of Conical Spring Unbalanced Seal to our prestigious customers. These are incredibly rugged & reliable & therefore used in wide range of sealing applications.The LTS61U series seal are extremely rugged & reliable & therefore used in wide range of sealing applications. These Seals have very few parts & hence can be easily assembled or dismantled.

We offer Single Spring Seal (HT Series) which is specially designed for High Melting Liquids. Single Spring Seal (HT Series) is basically used as a replacement to metal bellow. Equipped with interlocking drive, our Single Spring Seal (HT Series) is a self-cleaning seal. Single Spring Seal (HT Series) is cost effective as compared to metal bellow. Versions Available Un-Balanced Seal - HT0 – HTW Operating Limits Diameter : 10â€Â¦.. 100 mmPressure : 20 ......35 barTemperature : -60oC â€Â¦ +260oCSpeed : 25 m/s Applications Vegetable OilThermal OilGeneral ChemicalsFatty Acid

a general service seal to be used with high viscosity fluids and slurries as alkalis, salts, viscous polymers, foods, pulp, industrial waste water, municipal plants.

Selected around the world by engineers for critical sealing applications, Pioneer Weston mechanical seals are designed to meet industrial and automotive requirements for both OEM and maintenance markets with a range of standard and custom solutions to cope with ever more demanding applications. ERIKS with the Pioneer Weston range and access to industry standard products offer the rapid replacement service supported by fitting, repair or refurbishment options to achieve an unbeatable overall mechanical sealing solution.

SM-31 is single conical spring, unbalanced seal with O-ring provided for secondary sealing. Since the Torque transmission is done by the single coil springs the seals are dependent on the directions of rotation, which is seen from the drive end of the shaft. Right handed spring and left handed springs are provided for clockwise and anticlockwise rotating shafts respectively. These seals can carry a variety of seals faces, serving application in submersible, sewage, chemical transfer, water pumps etc.