Butterfly Valves Dealers in Bhuleshwar, Mumbai

• Material: All
• Certification: ISO 9001:2008 Certified
• Valve Size: 1inch, 1/2inch, 1.1/2inch, 1.1/4inch, 2inch, 3/4inch
• Overall Length: 6-10 Inch, 20-30 Inch, 40-50 Inch
• Diameter (mm): 40 Mm, 50mm, 60mm, 300 Mm

Stainless Steel Butterfly Valves, Alloy Steel Butterfly Valves, Carbon Steel A105 Valve, Carbon Steel Butterfly Valves, Duplex Steel Butterfly Valves, Lug-Style Butterfly Valves Suppliers In India & Abroad.  

When the Butterfly Valves Manufacturer is fully open, the disc is rotated at a quarter turn so that it allows unrestricted passage. The Butterfly Valves Manufacturer in India may also be opened incrementally to regulate flow. There are different kinds of Butterfly Valves Manufacturer, that are adapted for different pressures and different usage. A Butterfly Valves Manufacturer in India is a rotational motion Valves with a quarter turn. It is used to stop, regulate, and start flow.

• Material: Cast Iron, Stainless Steel
• Type: Rack and pinion type
• Power: Manual, Hydraulic
• Pressure: 520 Kpa, 1000 Kpa
• Media: Air, Water, Gas, Fuel
• Port Size: 6cm - 20 Cm, 21cm - 50 Cm, 51cm - 60 Cm

With the assistance of our streamlined packing system, we are able to meet the customized and standard packing requirements of the clients. Moreover, clients can stay rest assured for the safety of the products from our end. We are supported by a well-managed and automated warehouse system wherein we store the entire lot in a secured manner. The automatic handling, storage and distribution of the goods thus become an ease.

• Pressure Rating: Class 150, 300, 600 & 800
• Type: Center Disc, Ecentric Disc
• Size: 50mm to 1000 mm
• Body Material: WCB, CF8, CF8M, Alloy 20
• End Connection: Flanged End / Screwed End / Butt Weld End
• Optional: Trunnion Motorised Ball, Manual Gearbox or Motorised Operation
• Design & Mfg. Standard: BS 5351

ACE ALLOYS LLP is one of the major manufacturers, suppliers and stockholders of Butterfly valves. Our Butterfly Valves gives high performance to the wide range of applications like cooling water, air, gases, fire protection, compressed air or gas applications etc. It is less costly compared to other valves. Butterfly valve is a rotational motion valve that requires quarter-turn. A butterfly valve consists of a disc mounted on a rotating shaft. Once the valve is completely closed, the disk blocks the line. The disc is at a right angle to the flow, when the butterfly valve is fully opened. Butterfly valves are of different types like Eccentric Butterfly Valve, Flanged Butterfly Valve, Lugged Butterfly Valve, Wafer Butterfly Valve, and Butt Weld Butterfly Valve Butterfly Valve Specifications: Depending on Butterfly valve construction material, they have high resistance to chemicals. They can even handle temperatures up to 200 °C. The materials may be Steel Butterfly Valves, Alloy Steel Butterfly Valves, Aluminium Butterfly Valves, Brass Butterfly Valves, Bronze Butterfly Valves, each adapted to different pressures and different usage.  We, at Ace Alloys LLP, make sure to provide the best material according to the client’s specification. Our company is well equipped with all kinds of resources for successfully meeting the demand of its products. Contact us today to get the best value price for butterfly valves..

• Size: 8" (2"- 8")
• Material:: SS304, SS316

Available in wafer type body pattern, these general purpose soft seated valves come with a fully rubber-lined single piece body with a centric disc construction. Universal design of butterfly valves makes them suitable to be fitted between pipe flanges of almost all known flange standards.

We are a well reckoned entity in the domain of offering Stainless Steel Threaded Butterfly Valve. Designed using sturdy material, our Stainless Steel Threaded Butterfly Valve guarantees a long service life with minimal risk of corrosion. We have priced Stainless Steel Threaded Butterfly Valve fairly. Besides, we are a credible Manufacturer, Supplier and Exporter of Stainless Steel Threaded Butterfly Valve. Raw Material Used S.S.316/316L S.S.304/304L

A Butterfly Valve is a mechanism which consists of a rotating disc to regulate the fluid flow. Though there are many traders in the market, Nakshatra Steel & Alloys is a noteworthyButterfly Valves Supplier and producer, serving all the valves needs of our customers. The raw material which is used to fabricate our Industrial Butterfly Valves is lent from genuine vendors of the market. Our production cycle is swift enough to always maintain large quantity of butterfly valves Stock. All the valves types are designed in a customized manner, depending on the client’s requirement. We use pure material to fabricate Eccentric Butterfly Valve and Flanged Butterfly Valve, which are lent from honest vendors. Our team elegantly polishes our Lugged Butterfly Valve and Wafer Butterfly Valve following all the national and international standards. We deploy modern machinery to design Butt Weld Butterfly Valve which undergoes thorough tests. We always maintain friendly relations with our professional clientele who are well satisfied with the quality of our Stainless Steel Butterfly Valves and Alloy Steel Butterfly Valves. Irrespective of the butterfly valve specification, all of our products are widely preferred by many industries. Our Aluminium Butterfly Valves and Brass Butterfly Valves are corrosion resistant even at elevated temperatures. For the exceptional properties of our Bronze Butterfly Valves, they are even exported to many countries across the world. As soon as you drop your order, our team involves itself in the transfer process. With a negligible delay, they deliver the ordered mechanism to your door step. With no more delay place call us now!

We offer the best quality Butterfly Valves that are made with high quality raw materials. Butterfly Valves, that we offer, are widely used in various applications. These corrosion resistant Butterfly Valves are in extensive demand everywhere, owing to their precision engineering and robust construction.

• 50mm to 600mm: Stainless Steel
• PTFE coated NBR: 10 BAR
• UPTO 1200 °C: Petro- Chemical, Oil & Gas, Purity & Some Marine & Industrial
• Applications: Petro- Chemical, Oil & Gas, Purity & Some Marine.

Material: SS 304, SS 304L, SS 316, SS 316L, SS 321 etc. Standards: SMS, 3A, DIN, BS, ISO, DS, ASME BPE, Aseptic etc. Application: Food, Dairy, Beverages, Pharmaceutical, Cosmetics, Healthcare etc. BUTTERFLY VALVE=-2 inch to 25 inch CHECK VALVES=1 inch to 12 inch GLOBEVALVES= 1 inch to 25 inch BALL VALVES= 1 inch to 10 inch GATE VALVES= 2inch to 25 inch SAFETY VALVES=1/2 to 3 inch( angle and open) Note : We also accept order as per our client requirment for various industrial valves

• Material: Stainless Steel
• Power: Hydraullic
• Pressure: High Pressure
• Operator: Electric Actuator
• Temperature Of Media: High Temperature, Low Temperature, Medium Temperature
• I Deal In: New Only

Sanitary Butterfly Valves used in anitary ball valves and unions Rajdev Steel (India) Offers - Sanitary Butterfly Valves About Rajdev Steel (India) Rajdev Steel (India) Formed by a group of young Professionals in 1980, is primarily engaged in exporting, stocking & suppling of all Ferrous & Non Ferrous metal in Pipes, Pipe Fittings & Sheets as per ASTM, API, AISI, DIN, JIS, BS, IS standard. Over Fifteen years of progress have consistently made us realise that more than products, it understands the client's requirements and giving maximum service to the customer is what makes us standapart from others. Over the years we have supplied our products to many prestigious projects in Power plant, Petrochemicals, Fertilizer, Chemical Process Industries, Textile, and Paper Industries & Defence. But this does'nt stops us from catering to customers of all sizes. We value for a single piece of requirement to large turnkey project & give 'MAXIMUM' service to all. We follow stringent Quality Standard to ensure that the products, Performance & Service you get from us is always "MAXIMUM". The quality assurance system is guided by principles that support our unique working culture which incorporates respect, self-management, open communication and creativity. Rajdev Steel (India) also deals into: # Flanges & Forgings # Stainless Steel Fittings # Welded Pipes & Tubes # Seamless Pipes & Tubes # Minerals & Metallurgy

We are largest valves manufacturers in India and metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows unrestricted passage. The valve may also be opened incrementally to regulate flow. There are different kinds of Butterfly Valves, each adapted for different pressures and different usage.When the butterfly valve is closed, the disc is turned so that it totally shut off the passageway. When the Butterfly Valves is fully open, the disc is rotated at a quarter turn so that it allows unrestricted passage. The butterfly valve may also be opened incrementally to regulate flow. There are different kinds of butterfly valves, that are adapted for different pressures and different usage. A Butterfly valve is a rotational motion valve with a quarter turn.

A butterfly valve is a shut-off valve with a relatively simple construction. In closed position, the disc blocks the valve bore while in open position, the disc is turned to allow flow. A quarter turn takes the valve from fully open to fully closed position, or opposite, and thus the butterfly valve allows for quick opening and closure. Butterfly valves can be used for a broad range of applications within water supply, wastewater treatment, fire protection and gas supply, in the chemical and oil industries, in fuel handling systems, power generation etc. Some of the advantages for this type of valve are the simple construction not taking up too much space, and the light weight and lower cost compared to other valve designs. The valves can be operated by handles, gears or actuators according to any specific need. Main design of butterfly valves     The butterfly valve can be centric or eccentric. On a centric (concentric) butterfly valve the stem is centered in the middle of the disc and the disc centered in the bore. The eccentric butterfly valve has one or more stems (stub shafts) located offset from the center according to the categories of single, double and triple offset valves.     Butterfly Valves Butterfly Valve components: The butterfly valve consists of only four main components: body, disk, stem and seat. Butterfly valve body: Butterfly valves generally have bodies that fit between two pipe flanges, the most common being lug and wafer body design. Butterfly valve disk: The disk is how the valve stops flow – it is equivalent to a plug in a plug valve, a gate in a gate valve or a ball in a ball valve. There are variations in disk design and orientation in order to improve flow, sealing and/or operating torque. Butterfly valve Stem: The stem of the butterfly valve may be a one-piece shaft or a two-piece (split-stem) design. The stem in most resilient seated designs is protected from the media, thus allowing an efficient selection of material with respect to cost and mechanical properties. Butterfly valve Seat: The seat of a resilient-seat butterfly valve utilises an interference fit between the disk edge and the seat to provide shutoff. The material of the seat can be made from many different elastomers or polymers. The seat may be bonded to the body or it may be pressed or locked in. Butterfly valves are easy and fast to open. A 90° rotation of the handle provides a complete closure or opening of the valve. Large Butterfly valves are usually equipped with a so-called gearbox, where the handwheel by gears is connected to the stem. This simplifies the operation of the valve, but at the expense of speed. Butterfly valves are relatively inexpensive to build. Butterfly valves require less material due to their design. The most economical is the wafer type that fits between two pipeline flanges. Another type, the lug wafer design, is held in place between two pipe flanges by bolts that join the two flanges and pass through holes in the valve’s outer casing. Furthermore, common Butterfly Valves materials are often less expensive. Butterfly valves have less space requirements. This is due to their compact design which requires considerably less space, compared to other valves.

Features PTFE diaphragm is manufactured by PTFE suspension resin with high strength and tenacity. Different specifications can be made by methods of molding, skiving and finalizing the design. It can also be adhered to rubber and metal with one side etched. PTFE diaphragm is made by high-strength, good toughness fluorine resin....) Used in metri pumps, diaphragm pumps, and diaphragm valves2) All sizes are available according to customers' requirement3) High chemical properties, acid and alkali resistant 4) Wide working temperature range5) Self lubricating6) Nonstick7) Not aging

• Valve Material: SUS 316L Stainless Steel
• Connection: Clamp
• Work Pressure: 0-1.6MPa / 232psi
• Applicable Temperture: ≤80℃
• Environment Temperature: -20℃ to 60℃
• Applicable Medium: Water, Oil, Air
• Operation: Pneumatic
• Control Method: Single Acting, Automatic Return Position.
• Operating Range: 0-90°
• Leakage of Q: According to Gb / T4213-92, for the Kv Value of 10-4.
• Product Certification: IS

• Packaging Type: Carton
• Material: SS 304, SS 304L, SS 316, SS 316L, SS 321 etc.
• Specialities: Non Breakable, Investment Casting, Heat Resistance
• Temperature Pressure: High Temperature Pressure
• Size: 2 Inch to 25 Inch
• Standards: SMS, 3A, DIN, BS, ISO, DS, ASME BPE, Aseptic etc.
• Application: Food, Dairy, Beverages, Pharmaceutical, Cosmetics, Healthcare etc.

Operations: Lever, worm-gear, electric, pneumatic and hydra-pneumatic. Characterstics: Fire safe design,available in iron steel,stainless steel, etc. Size: NPS 2-52"

• Material: Stainless Steel
• Color: Grey
• Features: Precisely engineered , Easy to handle ,Rust resistance , Uniform thickness ,Robust design
• Usage/Application: Industrial
• Power: Manual
• Operator: Lever

• Specialities: Reliable , Fine finish , Reasonable rates .

These valves are available in special designs, which ensure smooth operations in every application. The robust construction of our Rubber Lined Butterfly Valve makes it a favored choice among the customers.   

• Type: Wafer Type
• Sizes: 2” to 24”
• Rating: 150
• Manufacturing Standard: API 609, BS 5155
• Body Material: Alloy
• Operation: Hand Wheel, Gear, Pneumatic Actuator, Electric Actuator, Hydraulic Actuator

• Weight: 5Kg, 10kg, 15kg, 20kg
• Packaging Type: Wooden Box, Carton, Pallets
• Valve Size: 1inch, 1/2inch, 1.1/2inch, 1.1/4inch, 2inch, 3/4inch, any Size Below 24
• Material: Stainless Steel
• Certification: ISO 9001:2008 Certified
• Color: White
• Country of Origin: India
• Usage: Water Fitting
• Diameter (mm): 40 Mm, 50mm, 60mm, 300 Mm, as Per Standard Size
• Overall Length: 6-10 Inch, 20-30 Inch, 40-50 Inch
• Specialities: Heat Resistance, Durable
• Type: Industrial Valves
• Condition: New
• Finishing: Polished
• Automatic Grade: Manual
• Warranty: 1 Year
• Media: Water
• Corrosion Resistance: Yes
• Packaging Size: 5 Pieces
• Size: Above ¼ Inch