Impact Testers Dealers

We are offering impact testing machine.innovative impact testing machine is specifically designed for conducting izod & charpy test. Impact testing machine is suitable for testing raw material specimen as well as finished components. components & working of impact testing machine pendulum of the machine is mounted on antifriction bearings contains two starting positions, the upper one for charpy and the lower one for izod testing the pendulum on release swings down to break the specimen and the power absorbed in doing so is calculated as the variation between the height of drop before rupture & height of raise after rupture of the test specimen the output is read from the maximum pointer on the dial scale offered with self centering tong v - notch milling cutter u - notch milling cutter caliper gauge for checking v notch for izod & charpy depth notch gauge including v & u notch, angle & radius controls of pendulum the pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for charpy & the lower one for izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the maximum pointer position on the dial scale. (it is read on digital readout in case of electronic machines.) there are two strikers and one combined support available for lifting in to the pendulum and on to the base of the machine for izod, charpy test, changing from one striker to another is achieved simply by fixing the new striker into it's position. charpy test : the charpy test piece rests on alloy support anvils, fitted on the base of the machine rigidly held in position by allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports. izod test : the izod test is clamped vertically in izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece and the allen screw enable clamping of the test piece in correct height with the help of izod setting gauge supplied.

Introduction The aggregate impact value of coarse aggregate provides a relative measure of the resistance of an aggregate to sudden shock or impact. The oven dried and accurately weighed aggregates are subjected to a total of 15 blows of specified weight and fall and percentage of fines formed in terms of the total weight of the sample is expressed as the aggregate impact value.   General Description & Specification: Consists of base weighing between 20-30 kg with a lower surface of not less than 30cm and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 + 5.0mm. The hammer is provided with a locking arrangement. A metal tup (hammer) weighing 13.5 to 14.0 kg, the lower end of in cylinderical shape, 100mm in diameter and 5cm long with a 2mm chamfer at the lower edge and case hardened. Complete with a cylindrical cup, 102mm dia x 50mm depth, one measure 75mm dia x 50mm deep and a tamping rod of circular cross section 10mm in diameter and 230mm long, rounded at one end.   Optional Accessories: The following accessories are not part of the standard supply and are supplied at an extra cost.   Test Sieve 10mm, 12.5mm and 2.36mm opening. Laboratory Oven. Automatic Blow Counter. Electronic Balance 500gm x 100 mg / Two Pan Balance.

  It is for determination the aggregate impact value and has been designed in accordance with BIS-9377-1979. The sturdy construction consists of a base and support columns to form a rigid frame work around the quick release trigger mechanism to ensure and effective free all of the hammer during test. The free all can be adjusted through 380 + 5 mm. The hammer is provided with a locking arrangement.

The PRESTO IZODCHARPY IMPACT TESTER has been specially designed to evaluate the impact resistance of plastics. The equipment works on the principle of the pendulum method. IZODCharpy Impact Tester is a consistent tool to measure the impact resistance of materials under sudden falling force or impact. The test instrument covers two tests, namely. • Izod (horizontal impact on vertically clamped specimen) • Charpy (vertical impact on the horizontally placed specimen). The IzodCharpy Impact test is significant in testing and evaluating the impact resistance of various plastic products. The test is used to determine the energy that is required to break a standard test specimen using the pendulum method. This highly reliable instrument is a must for all plastic testing laboratories and quality control departments. IzodCharpy Impact Tester reveals the impact strength in terms of Jm. This tester is used to designed to check the impact strength of plastics.

The pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy and the lower one for Izod testing. One release, the pendulum swings down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the position of maximum pointer on the dial scale.

Aggregate is consisted by a majority of materials of construction, and it is common practice to test aggregates for properties. Some properties like particle size, distribution, relative densities, soundness and resistance to attack by chemicals are checked. Sampling of aggregates forms an obligatory fraction of several constructioncivil engineering projects. Getting the sample to gauge the average quality of the entire mass is of prime importance. It is also true that some properties may perhaps be ideal in one situation, but not in another. S.S.International presents a fine array of cutting -edge and sophisticated aggregate testing instruments which are extremely dependable and guarantee complete accuracy of the operations. It is generally employed for sampling and preparation, abrasion value and tile testing. Grid Sieves, Riffle Boxes, Wire Basket, drying shrinkage and Aggregate Crushing Value Apparatus are some of the aggregate testing equipments from our side.