Density Testing Equipment Dealers

      Introduction The equipment is assembled in a mild steel cabinet attractively painted. A central shaft carries a platform with the glass cylinders of 50 ml. each. The platform with the glass cylinders moves up and down at 30 strokes per minutes through a distance of 5 cm and strikes on rubber cushioned bed. Electrically operated, supplied with time switch 0-15 minutes.

Smoke Density & Visibility Testing System – EN 45545-2 Compliant | KDM Global Product Overview Designed to assess smoke generation and optical visibility under controlled fire exposure Fully compliant with EN 45545-2 (Railway Applications – Fire Protection), specifically Annexes for smoke density testing Suitable for testing railway components such as seating, cables, flooring, insulation, and interior materials Measures optical density of smoke, transmission loss, and visibility impairment during fire exposure Applicable Standards EN 45545-2: Fire protection of railway vehicles – Requirement sets R22, R23, R24 EN ISO 5659-2: Plastics – Smoke generation measurement in a single-chamber test ISO 5659-2 Annex C: Optical Density and Transmissivity NCD 1409 / UIC 564-2: Smoke toxicity and visibility for railway applications ASTM E662 (Optional calibration module available) Key Features Single-chamber smoke box with integrated photometric system Wide-beam or narrow-beam light path with photodetectors for transmittance High-precision laser or LED light source and receiver alignment Radiant heat exposure with conical heater or tubular furnace (optional configuration) Programmable control system for time-temperature profile and gas sampling Real-time monitoring and graphical output of specific optical density (Ds) Fully enclosed with gas-tight seals and controlled ventilation Safety interlocks, automatic exhaust, and post-test data logging Optional toxicity gas analysis interface (FTIR/NDIR) for expanded testing Software compatible with PC-based test result generation and archiving Technical Specifications Chamber volume: 0.5 to 1 m³ Light source: Tungsten filament lamp / LED / laser (custom options) Measurement range: 0 to 3.0 optical density units Detector type: Silicon photodiode / photocell Optical path length: 0.5 m to 1 m Heating power: 25 to 50 kW (adjustable) Air flow: 0 to 50 L/min, programmable Test duration: 0–60 minutes Data output: Real-time graphical plot and CSV/PDF export Applications Smoke visibility testing of railway interiors under EN 45545-2 Evaluation of plastic components, cable jackets, foams, adhesives, paints Ideal for component approval under R22, R23, R24 for HL1 to HL3 hazard levels Material screening during design stage for metro, tram, locomotive, coach manufacturing Also usable for general low-smoke zero halogen (LSZH) cable testing and automotive interiors Industries Served Railway equipment and rolling stock manufacturers Metro and rail coach designers and OEMs Independent third-party certification laboratories R&D and testing centers for materials development Government and transport compliance authorities Why Choose KDM Global Custom-engineered railway smoke visibility testers meeting EN 45545-2 compliance All systems designed and manufactured in-house in India Fully integrated software for easy test execution, reporting, and data validation Available with calibration services and optional FTIR integration for smoke toxicity Fast delivery, installation support, and long-term service contracts available Proven equipment supplied to rail coach manufacturers and labs across Asia and Europe Explore Related Products EN 45545 Railway Fire Testing Equipment Smoke Density Tester – ISO 5659-2 Cone Calorimeter – ISO 5660 Toxicity Test Apparatus – NCD 1409 Full Product Range

This machine is used for determination of theoretical density of asphalt mixer by vacuum method for applications such as asphalt mixer design, road condition investigation, calculation of porosity and compactness in the road construction quality management. The equipment has a main body fitted with vacuum gauge, two vacuum containers, vibratory table and control panel. The vibratory table operates on manual and automatic mode to release the entrapped air from the asphalt sample. Suitable for operation on 220V, 50Hz, 1phase, AC supply.

For density tests on aggregates as per procedure laid down. Made of brass with stainless steel wire mesh 6.3mm size ruggedly constructed, approximately 20cm dia x 20cm high. Complete with handle.

Specially designed to study the packing down of powder beds of different powders fitted with Digital Counter facility, starts automatically on attaining the pre-set strokes provided without Graduated Glass Cylinders of 50/100 ml capacity.  

High Precision Balance with Auto Specific Gravity (Density) Result Capacity: 100g to 4000g Readability: 0.00001g to 0.1g Standard Features : Auto calibration Auto self checking function Anti shaking software Stability filtration for matching environment Excellent repeatability Overload protection Design Below weighing system Easy acces data Global weighing units GSM weighing facility High grade chemical resistance body

The equipment is assembled in a mild steel cabinet attractively painted. A central shaft carries a platform with the glass cylinders of 50 ml. each. The platform with the glass cylinders moves up and down at 30 strokes per minutes through a distance of 5 cm and strikes on rubber cushioned bed. Electrically operated, supplied with time switch 0-15 minutes.

Cylindrical Metal Measures,with ISI Certification Mark, IS:2386 (Part-3). Cylindrical Metal Measures with ISI Certification Mark, IS:2386 (Part 3) Consists of one each of the following measures: 45401 Measure 3 litres 45402 Measure 15 litres 45403 Measure 30 litres   Supplied Complete with AIM 345 Tamping Rod of 16mm dia x 60 cm long having ISI Certification Mark IS:10086 Determines bulk density or unit weight of aggregates.   Specification: Consists of M.S. Cylindrical Container 150mm +/-0.5mm dia x 130mm to 140mm high with base plate 200 to 230mm/sqr x 6mm thick. A Plunger of 148mm +/-0.5mm dia x 100 to 115mm high. Supplied complete with Tamping Rod, 16mm dia x 600mm long, both ends rounded, 1 no. Metal Measure 115+/- 0.5mm dia x 180 +/- 0.5mm high.

We are offering Double Layer Density Gradient Kit (testo separation-2). This Double Layer Density Gradient Kit employs a Technique that is suitable for contaminated semen samples. We are amongst the reliable Manufacturers and Suppliers of the Double Layer Density Gradient Kit, based in Delhi.   Each Of This Double Layer Density Gradient Kit Contains : 1ml 90 % 1ml 45 % density gradient solutions 5 ml Testo wash solution