Hydraulic Machine Dealers in Alandi, Pune

(104 products available)
  • MS Hydraulic Testing Machines

    MS Hydraulic Testing Machines

    4,500,000 / Piece

    • MaterialMild Steel
    • Driven TypeHydraulic
    • Country of Origin440 V
    • Frequency50-60 Hz
    • Surface TreatmentPaint Coated
    • Usage/ApplicationIndustrial
    ...more
  • Premium
    Hydraulic Washer Flattening Machine

    Hydraulic Washer Flattening Machine

    Get Price Quote

    • MOQ1 piece
    • Brand NameSaynak Hydraulics
    • Driven TypeHydraulic
    • ConditionNew
    • Automatic GradeAutomatic
    • ApplicationWasher Flattening
    • Country of Origin220V-380V
    • Number Of FlowerWasher Flattening Machine
    • Country of OriginIndia
    ...more
    www
  • Premium
    Servo Hydraulic Computerised Universal Testing Machine

    Servo Hydraulic Computerised Universal Testing Machine

    Get Price Quote

    • Load Capacity Options5 KN/10 KN/25KN/50 KN/100 KN
    • Dynamic rating210 Bar supply allowing Dp 70 Bar across the servo valve
    • Actuator Stroke options50mm/100 mm/250mm
    • Load CellSuitable range Fatigue type
    • Load ResolutionAt least 1 in 10000 parts
    • Load Accuracy+/- 0.5% of Reading.
    • Length measurementLinear sensor for actuator travel.
    • Length Resolution0.01 mm
    • Length Accuracy+/- 0.05 mm
    • Servo ValveAs per requirement
    • ActuatorHydraulic with Servo valve and Servo Cylinder Double Acting Type
    • Actuator SpeedProgrammable from 1 to 500 mm/sec .
    • Maximum DaylightStandard 600 mm From top of bottom plate to bottom of platen. Any other size to suit application
    • Column SpacingMax. upto 500 mm or to suit applicatiion
    • Maximum Daylight600 mm From top of bottom plate to bottom of platen
    • Standard column length1000 mm (Different column lengths available on request.)
    • Operating/Test Modes.Tensile/ Compression static as well as fatigue
    • The Kalpak Computerized Servo Hydraulic Universal testing Machine offers ideal solution for dynamictesting of materials and components over a range upto 50 HzThe system is free standing type hence does not require a special foundation. The system consists of a sturdyload frame, with integrally mounted actuator and servo valves, a hydraulic power unit. Test control subsystemController, PC and Kalpak windows based software UTM-TEST-SH for Machine control and data acquisition andanalysis. Customization: User can customize the System as per their performance requirements by choosing from a variety of options forload frame, force capacity, Servo valve flow ratings, and pump capacity. Choice of Accessories: We do offer a wide selection of grips, fixtures, extensometers, load cells, and environmental chambers as peryour specific applications. Advantages   Flexible configuration to meet your specific needs Advanced state of the art analogue controller Wide range of material-specific test application software Dynamic testing capability—up to 50 Hz Large selection of test accessories, including grips and environmental chambers Fatigue rated Height Adjustable Platen to suit test requirement A variety of optional customized application software packages to suit test requirementsWide range of load frame force capacities, servo valves, servo cylinders and pump selection are offered toprovide feature rich economic solutions. Also offered selection of grips, fixtures, extensometry, load cells, andenvironmental chambers to fine-tune the system to meet your particular requirements.   Load Frame   Free Standing complete with Hydraulic Power pack, Servo Valve, ServoCylinder, Two pillar construction with bottom plate mounting of actuator,Load Cell mounted on the upper Platen, Moving platen coupled to theservo actuator piston   Hydraulic Power Pack Capacity Options: 8,20,35 Liters per minute Fixed/ Variable delivery options Submerged pump for quiet and noiseless operation PLC controlled Visual Indication for Filter Block, Low oil Level, High Oil Level, High Oil temperature, Pump Start, Pump Stop and Emergency Stop Button,. Off line cooling and filteration system .   Safety Features Emergency Stop, Pump Start and Pump Stop Buttons, Over Travel Protection by full length adjustable Limit Switches, Electronic Over Load protection max. upto 100% of capacity, High Oil temperature & Low Oil Level indication for alarm annunciation, Filter Block Indication, Motor overload safety   Software for Analysis &Control Kalpak UTM ServoTEST-C is a Windows based software for Control ofComputerised Servo Hydraulic UTM, On line Data Acquisition to PC as wellas Data Analysis. It offers User friendly features such as: Real time display of Test data, Test Curves Data analysis: Software Pass word protection Easy Test Data saving as EXCEL/ACCESS files to retrieve and view stored past data like Product, Test, Batch details and test data. User can feed / Program parameters like Date, User Name, Material Details and Specifications, Sample Size, Units of measurement ,Test Selection, Parameter, Batch No., etc. Easily accessible file system to retrieve and view stored past data like Product, Test, Batch details and test data.
    ...more
    www
  • Premium
    NC Controlled Hydraulic Presses

    NC Controlled Hydraulic Presses

    Get Price Quote

    • Capacity10 ton
    • Oil Tank Capacity65 Liters
    • Maximum Pressure700 bar
    • Total Width100 mm
    • Total Height600 mm
    • Total Length300 mm
    • We specialize in manufacturing hydraulic heavy-duty power presses that are used in various applications. These are specially designed for highest pressure rating. Our hydraulic presses provide easy access to the tool area for the applications of component feeding and tool changing. Their salient features include application specific design, precision functionality, and optimum performance oriented. It is offered in following models.
    ...more
    www
  • Premium
    Hydraulic H Frame Press

    Hydraulic H Frame Press

    Get Price Quote

    • MOQ1 Piece
    • Power SourceHydraulic Power Packs
    • UsageIndustrial
    • CertificationCE Certified
    • Frequency50 Hz
    • Capacity Range1 Tonne To 300 Tonnes
    • Press TypesH Type
    • Surface FinishColor Coated
    • • Hydraulic Presses: Our expertise in the manufacturing of Hydraulic Presses, which can be operated by hand or by Foot, which are operated by our hydraulic power packs. Our presses range from a capacity of 1 tonne to 300 tonnes. Our varied range of hydraulic presses include : Pillar type hydraullic press, 'H' type hydraulic press, 'C' frame hydraulic press, closed body hydraulic press, mini and carry type hydraulic press.
    ...more
    www
  • Hydraulic Press Brake..

    Hydraulic Press Brake..

    Get Price Quote

    • ConditionNew
    • Machine TypePress Brake
    • CertificationISO 9001 2000
    • Raw MaterialSheet / Plate Rolling
    • Automatic GradeAutomatic
    • Packaging DetailsWOODEN BOX PACKING OR GUNNY PACKING..
    • Material / Metal ProcessedMS SHEET.
    • Place of OriginIndia
    • COLOURBLUE.
    • PortJNPT PORT
    ...more
  • SINTERING HOT PRESS

    SINTERING HOT PRESS

    Get Price Quote

    We are offering sintering hot press. Sintering hot press - range : 25 to 75 kva sintering presses for single piece and volume production of diamond tools like dressing tools, hollow drills, honing tools, saw segments and bit segments, etc. Salient features rugged design and robust construction. The entire cycle is automatic except for loading the job. Consistent product quality. Least maintenance cost. Precise temperature control. Import substitute machine.
    ...more
  • Vertical Hydraulic Honing Machine

    Vertical Hydraulic Honing Machine

    3,000,000 / Piece

    • Power18 HP
    • Brand NameDeepmaya Automation
    • Country of Origin380 V
    • Automation GradeFully-automatic
    • Length500 mm
    ...more
  • C Frame Hydraulic Press Machine

    C Frame Hydraulic Press Machine

    250,000 / Piece

    • CertificationCE Certified
    • Packaging TypeCustomise
    • Power1-3kw, 9-12kw
    • MaterialCast Steel, Iron, Stainless Steel
    • Capacity1-5 Ton, 40-100 Ton
    • Automatic GradeAutomatic
    • Driven TypeHydraulic
    • Control TypeCNC
    • MOQAs per Client's Requirements
    ...more
  • Oil Hydraulic Trainer

    Oil Hydraulic Trainer

    Get Price Quote

    • FeaturesRobust construction, Sturdiness, Precisely designed, high performance, efficiency.
  • Premium
    Hydraulic Shaft +5

    Hydraulic Shaft

    1,500 / Piece

    • MOQ100 Piece
    • MaterialAlloy Steel
    • ShapeCylindrical
    • ApplicationIndustrial
    • FeatureDurable, Corrosion Resistance
    •  FinishingCoated
    • Brand NameROYAL MECH INDUSTRIES
    • 🔩 Hydraulic Shaft – Precision Engineered for High-Performance Hydraulic Systems Product Description: We are a trusted manufacturer and supplier of Hydraulic Shafts, designed for demanding applications in hydraulic cylinders and industrial machinery. Our shafts are made from premium-grade materials and precisely machined to ensure high strength, excellent surface finish, and resistance to wear and corrosion. Each shaft is customized to meet client specifications and application requirements. Product Details: Material: EN8, EN19, EN24, C45, Stainless Steel, Alloy Steel Diameter Range: 10 mm to 150 mm Length: Up to 3000 mm (custom sizes available) Surface Finish: Hard Chrome Plated / Ground & Polished / Induction Hardened Hardness: HRC 50–60 (optional) Tolerance: As per IS/DIN/ANSI standards Brand: [Your Brand Name] Country of Origin: Made in India Key Features: High load-bearing capacity Corrosion and abrasion resistance Smooth surface for low-friction hydraulic motion Custom machining for threads, grooves, keyways, etc. Long service life with minimal maintenance Applications: Hydraulic Cylinders Injection Molding Machines Earthmoving Equipment Press Machines Automotive and Agricultural Machinery Packing Type: VCI Paper / Plastic Sleeve for rust prevention Bubble wrap and corrugated boxes (for domestic supply) Heavy-duty wooden crates or pallets (for export) Additional Information: MOQ: As per requirement Delivery Time: 7–15 Days (based on order & customization) Payment Terms: T/T, NEFT, UPI, Cash Customization: OEM / As per drawing or sample 📞 Contact us today for high-quality hydraulic shafts at competitive prices. Bulk orders and custom solutions available.
    ...more
    www
  • Hydraulic Oil Cleaning Machine

    Hydraulic Oil Cleaning Machine

    Get Price Quote

    Clean Oil is necessary to get good performance from your machines equipments. Contaminations in oil are responsible for breakdown, losses and replacement of the oil. Conventional methods of oil purification, viz: filtration, centrifuge and straining, are incapable of adequately cleaning oil, as they remove particles only above 5 microns in size. These remaining small size particles cause high contamination and therefore require regular changing of oil. The electrostatic cleaning presents a far superior and highly effective method of purifying hydraulic oil. Contaminants caused due to dust, abrasive metallic particles, oxidation, sludge and fine water are removed by this method. Oil cleaned by this method meets NAS class 45 requirements. (National Aerospace Standards 1638)
    ...more
  • Hydraulic Press Machine

    Hydraulic Press Machine

    Get Price Quote

    • MaterialMild Steel
    • Power10 HP
    • Capacity5 (ton/hr)
    • Load Capacity10 Ton
  • PTFE Piston Seal

    PTFE Piston Seal

    80 / Piece

    • ShapeRound
    • Working Pressure40Mpa
    • FeaturesCost-effectiveness, Longer service life,Dimensionally accurate,Highly reliable
    • Working mediumHydraulic oil, gas, water
    • Working speed4m/s
    ...more
  • Hydraulic Press

    Hydraulic Press

    200,000 - 4,000,000 / No

    • Country of OriginIndia
    • Brand NameHYDROTECH INDUSTRIES
    • Country of OriginAS PER COUNTRY WHERE TO BE USED
    • ConditionNEW
    • After-Sales Service ProvidedYES
    • Model NumberHP
    • Place of OriginPUNE, MAHARASHTRA, INDIA
    • Power Source3 PHASE WITH NEUTRAL ELECTRIC SUPPLY.
    • COLOR AS PER CUSTOMER'S CHOICEDEPENDS ON TONNEAGE & OTHER SPECIFICATIONS
    • Ours is a well designed , carefully manufactured, quality product,tailor made as per customer's requirements. Please send your requirements using data below. A) application of press : b) tonnage : ton c) table size : l mm x w mm d) daylight : mm e) throat depth (for c frame) : mm(for c f)construction : a) “ c” frame type. b) 4 pillar 2 pillar type c) “h” frame type. d) special g) table details : a) tee slot : requirednot required b) if required : size mm c) hole in center : requirednot required d) if required : size mm h) working height : mm i) cylinder stroke : mm j) cylinder speeds a) fast forward : mm sec. B) return : mm sec. C) pressing : mm sec. K) actual cylinder travel under load : mm l) idle cylinder travel : mm m) cycle time : sec cycle. N) no. Of strokes : sec or min or hr. O) operation by a) hand pump b) motorized power pack with hand lever operated direction control valve c) motorized power pack with solenoid operated direction control valve & electric controls p) safety features : a) wire mesh on moving platen. b) photo electric sensor c) palm push buttons in series q) makes of components: for hydraulic, electric components, if any specific
    ...more
  • Die Spotting Press Machine

    Die Spotting Press Machine

    4,000,000 / Unit

    • Lifting Capacity150 ton
    • Motor Power18.5kw
    • Oil Tank Capacity600L
    • Machine Floor Size2000 x 2000 mm
    • Machine Height6350mm
    • Machine Weight85mm
    • Pressing Speed25mm/sec
    ...more
  • Hydraulic Baling Press

    Hydraulic Baling Press

    Get Price Quote

     For Paper & Card Sheet Scrap Bailing Purpose• Tonnage - 4Ton• Box Size - 700 * 700 *400mm With Manual Operation
  • Hydraulic Equipment

    Hydraulic Equipment

    Get Price Quote

    We are offering a wide variety of customized material Hydraulic Equipment. Our range of customized material Hydraulic equipment is manufactured using top quality materials which ensure that the equipment is high on performance, durability and sturdiness. The equipment is available in various models and is commonly used across engineering industry, foundries and other equipment Hydraulic units.
    ...more
  • Hydraulic Operated EPS Block Moulding Machine

    Hydraulic Operated EPS Block Moulding Machine

    Get Price Quote

    We offer Hydraulic Operated Eps Block Moulding Machine. SALIENT FEATURES Single side opening for minimal steam leakage Vacuum blower to get dry product with minimum cycle time Designed especially for normal & high density Designed to work with less Electricity, Steam, Air, Water consumption Ejection with pneumatic system Separate valves for Steam line, Air line & Water line
    ...more
  • 220T Press Brake Machine

    220T Press Brake Machine

    Get Price Quote

    • Country of Origin220V
    • Automatic GradeAutomatic
    • Power3-6kw
    • Thickness1 to 5 mm, 6 mm, 8 mm, 10 mm
    • Length3000 mm, 2400 mm, 2200 mm, 1600 mm
    • MaterialMetal
    • DurabilityLong Life
    • FeatureDurable
    ...more
  • Hydraulic 4 Roll Plate Bending Machine

    Hydraulic 4 Roll Plate Bending Machine

    Get Price Quote

    We offer high quality Hydraulic 4 Roll Plate Bending Machine to the clients. Hydraulic 4 Roll Plate Bending Machine, offered by us, finds uses in numerous manufacturing industries. Our Hydraulic 4 Roll Plate Bending Machine has features such as overload protection, correction of axial offsets, simple cone bending, and pre bending of sheet edges. Our Hydraulic 4 Roll Plate Bending Machine is suitable for light and medium aluminum or stainless steel plates. Highlights Overload protection Offers simple cone bending Easy to operate
    ...more
  • Vertical Hydraulic Honing Machines

    Vertical Hydraulic Honing Machines

    Get Price Quote

    Sheetal Engineers is instrumental in offering our clients a wide spectrum of vertical honing machines in Pune. These vertical honing machines are fabricated employing superior grade materials, procured from dependable and trust-able vendors. The vertical honing machines are precisely designed with sophisticated material to assure our valued patron, complete resolution. In addition to this, the offered vertical honing machines are available in client friendly rates.   Features: Robust construction Longer functional life Reliable Efficient.
    ...more
  • Vertical Hydraulic Honing Machines

    Vertical Hydraulic Honing Machines

    Get Price Quote

    Sheetal Engineers is instrumental in offering our clients a wide spectrum of vertical honing machines in Pune. These vertical honing machines are fabricated employing superior grade materials, procured from dependable and trust-able vendors. The vertical honing machines are precisely designed with sophisticated material to assure our valued patron, complete resolution. In addition to this, the offered vertical honing machines are available in client friendly rates. Features: Robust construction Longer functional life Reliable Efficient.
    ...more
  • Hydraulic Oil Cleaning Machine

    Hydraulic Oil Cleaning Machine

    Get Price Quote

    Electrostatic oil cleaner systems use electrostatic precipitation to remove sub-micron particle of insoluble material, without affecting soluble oil additives. Tiny particles are electrostatically driven to and captured on positively or negatively charged walls of electrodes. Large particles are trapped in the resin impregnated cellulose filter. Coalescing filter in dehydration cell is used for removal of moisturewater up to 5000 PPM. Modern additives-treated oil is highly resistant to deterioration; it can continue service indefinitely if kept clean and contamination free.
    ...more
  • Arbor Press

    Arbor Press

    Get Price Quote

    Arbour presses are designed for production work of quick operation in general engineering workshops. automobile workshops, garages etc. for driving mandrels in and out of work and can also be used for inserting and removing bushes, bearings etc. They do not bend or burr the work or necessitate taking off carrier and will prove saving of time and increased life of arbours, Available in two types as under : Round Rack : Provided with a keyway and screw to prevent the rack turning. Square Rack : Has a larger bearing surface which prolong service life. The machined rack bearing plate is held securely to the body by four large screws, permitting take up for possible wear.
    ...more
  • Hydraulic Equipment

    Hydraulic Equipment

    Get Price Quote

    Hydraulic Equipment products include Rock Breaker Chisels, Industrial Pistons, Rock Breaker Seal Kits, Damper Pad, Industrial Diaphragm and Industrial Damper
  • Hydraulic Screen Changer

    Hydraulic Screen Changer

    125,000 - 175,000 / Piece

    • MOQ1 Piece
    • MaterialDie steel
    • Driven TypeHydraulic
    • ConditionNew
    • Automatic GradeFully Automatic
    • Power9-12kw
    • ApplicationIndustrial
    • Our rapidly growing organization is busy in offering a premium quality Hydraulic Screen Changer that is available in numerous sizes.
  • Tube Expansion Machine

    Tube Expansion Machine

    Get Price Quote

    The Tube Expansion Machine is used to expand the ends the tubes of the assembled heater cores.The core is pneumatically clamped rigidly in a pair of product plates at the centre of the machine. After clamping the product, expansion is achieved by means of expansion units that are located and clamped on the hydraulic slides. Final desired form of the tube is achieved after this operation.
    ...more
  • Hydraulic System

    Hydraulic System

    Get Price Quote

    • FlowUp to 450 lpm
    • PressureUp to 400 bar
    • Electrically operated power packs from Achieve are compact, portable and light weight. These are equipped with 3way/4way/double acting cylinders. The power pack includes direct on-line starter/electrical control whenever required. The oil reservoir capacity depends on the stroke volume of the cylinders to be operated. The hydraulic systems can be designed to meet specific customer requirements. Features All pumps, Valves are of internationally reputed makes such as Rexroth / Hydac / Yuken / Polyhydron / Dowty  All valves are mounted on specially designed manifolds Heavy-duty pumps are of Yuken, Veljin, Rexroth, Polyhydron, Danison makes for trouble-free operation Applications Hydraulic Power Units for power plants, Steel industry, presses and marine applications Hydraulic test benches for hydraulic valves and pumps Lubrication systems, Valve stations for steel industry Hydraulic flushing systems with hydraulic oil and water glycol for defence industry  
    ...more
  • Hydraulic Paper Plate Making Machine

    Hydraulic Paper Plate Making Machine

    Get Price Quote

    The Hydraulic Paper Plate Making Machine, provided by us, has sturdy make and long service. Thanks to our immense expertise in this domain that allows us to deliver nothing short of the best quality Hydraulic Paper Plate Making Machine. With our excellence in this field, we share forefront for supplying world-class array of products from Pune(India).
    ...more
Filter by Locality
top