Industrial Heaters Dealers in Wadgaon Sheri, Pune

We offer hot water generators. Technical specification:   type: coil type hot water generator capacity: 70,000 kcalhr to 20,00,000 kcalhr. Working temperature: 95°c to 140°c fuel: l.d.o.f.o.lpg thermal efficiency: 87% ± 2% based on n.c.v. Of fuels. Heat recovery unit: economiser. Air preheater: in-built.

• Certification: CE Certified
• Color: Metallic
• Voltage: 110V, 220V
• Power: 1-3kw, 3-6kw
• Warranty: 1year
• Weight: 100-1000kg
• Capacity: 1000-1500nm/hr, 1500-2000nm/hr
• Automatic Grade: Automatic
• Driven Type: Electric

There is a variety of Hot Water Generators available like oil fired hot water generators, fuel fired generators, electric generators, etc. Electric Generators are convenient as all they need to operate after installation is a connection to the electrical supply and the water output. We have the best quality electrical hot water generators. These are easy to maintain and efficient. They have multiple applications and can be used for convenient water heating in big farm houses, residential areas, refineries, petroleum chemical industries, etc.

We are capable of catering to the customers situated anywhere and we are located in Pune(India). We give our patrons the choice to make payments online or offline. Our company understands the concerns of its customers. Therefore, we make sure our payment options are safe. The SWHS are of two categories : Closed loop system and open loop system. In the first one, heat exchangers are installed to protect the system from hard water obtained from bore wells or from freezing temperatures in the cold regions. In the other type, either thermosyphon or forced circulation system, the water in the system is open to the atmosphere at one point or other. The thermosyphon systems are simple and relatively inexpensive. They are suitable for domestic and small institutional systems, provided the water is treated and potable in quality. The forced circulation systems employ electrical pumps to circulate the water through collectors and storage tanks. The choice of system depends on heat requirement, weather conditions, heat transfer fluid quality, space availability, annual solar radiation, etc. The SHW systems are economical, pollution free and easy for operation in warm countries like ours. Based on the collector system, solar water heaters can be of two types. Flat Plate Collectors (FPC) based Solar Water Heaters : The solar radiation is absorbed by Flat Plate Collectors which consist of an insulated outer metallic box covered on the top with glass sheet. Inside there are blackened metallic absorber (selectively coated) sheets with built in channels or riser tubes to carry water. The absorber absorbs the solar radiation and transfers the heat to the flowing water. There are 60 BIS approved manufacturers of Solar Flat Plate Collectors.Evacuated Tube Collectors (ETC) based Solar Water Heaters : Evacuated Tube Collector is made of double layer borosilicate glass tubes evacuated for providing insulation. The outer wall of the inner tube is coated with selective absorbing material. This helps absorption of solar radiation and transfers the heat to the water which flows through the inner tube. There are 44 MNRE approved ETC based solar water heating suppliers. Solar water heating is now a mature technology. Wide spread utilization of solar water heaters can reduce a significant portion of the conventional energy being used for heating water in homes, factories and other commercial and institutional establishments. Internationally the market for solar water heaters has expanded significantly during the last decade. Salient Features of Solar Water Heating System : Solar Hot Water System turns cold water into hot water with the help of sun’s rays. ¾ Around 60 deg. – 80 deg. C temperature can be attained depending on solar radiation, weather conditions and solar collector system efficiency ¾ Hot water for homes, hostels, hotels, hospitals, restaurants, dairies, industries etc. ¾ Can be installed on roof-tops, building terrace and open ground where there is no shading, south orientation of collectors and over-head tank above SWH system ¾ SWH system generates hot water on clear sunny days (maximum), partially clouded (moderate) but not in rainy or heavy overcast day ¾ Only soft and potable water can be used ¾ Stainless Steel is used for small tanks whereas Mild Steel tanks with anticorrosion coating inside are used for large tanks ¾ Solar water heaters (SWHs) of 100-300 litres capacity are suited for domestic application. ¾ Larger systems can be used in restaurants, guest houses, hotels, hospitals, industries etc. Fuel Savings : A 100 litres capacity SWH can replace an electric geyser for residential use and saves 1500 units of electricity annually. Avoided uitility cost on generation The use of 1000 SWHs of 100 litres capacity each can contribute to a peak load shaving of 1 MW. Environmental benefits : A SWH of 100 litres capacity can prevent emission of 1.5 tonnes of carbondioxide per year. Life - 15-20 years Approximate cost - Rs.15000- 20,000 for a 100 litres capacity system and Rs.110-150 per installed litre for higher capacity systems Payback period - 3-4 years when electricity is replaced 4-5 years when furnace oil is replaced 5-6 years when coal is replaced Though the initial investment for a solar water heater is high compared to available conventional alternatives, the return on investment has become increasingly attractive with the increase in prices of conventional energy. The pay back period depends on the site of installation, utilization pattern and fuel replaced.

Ground Mounted Oven Structure Based Oven Modular Oven Electrical / Gas / Diesel fired Oven Camel back type Oven S - U - A type Oven   The Baking process is the final & crucial in the paint finishing process, Raj System Oven controls component body temperature and the bake oven environment to produce coating finishes of consistently exquisite quality.   Our Oven can raise the temperature of difficult to heat areas, within a shorter period of time than traditional Ovens. Applying rapid moving hot air to the body through a slit-type nozzle enables this design is to be a fast heating that enhances the raising of temperature in thick parts in and around the body.   Our bottom line is to take a design approach that ensures that customers will get the maximum possible output with the least maintenance and trouble free plant operation.   The plant is designed to be versatile so that the same infrastructure can be employed to handle jobs as diverse as aluminium, switchgear, appliances etc.   The heating chamber is a result of design excellence, making it so compact and efficient that it ensures customers will get maximum heat transfer efficiency with minimum fuel consumption. We can offer - Camel Bake and Ground mounted of "S" Loope, "A" type, "U" type Ovens.

• Voltage: 240V
• Phase: 3 Phase
• Size: 10 x 15 Feet
• Heater Material: Nikel
• Surface Treatment: Color Coated

We offer a wide variety of Flexible Fabric Heating Mantle which are extensively used in laboratories to apply heat to containers. Our Laboratory Heating Mantleis available with a sturdy aluminum body. Its epoxy powder finish enhances its exterior. The Heating Mantle we offer are best suited for round bottom flasks. Proper electric wiring eliminates the risk of short circuits. The high temperature range of 400º C makes our Heating Mantle ideal for industrial use.   Feature: Aluminum body with epoxy powder coat finish -Fiber glass net with long lasting nichrome heating element -High grade glass wool insulation -Suitable for round bottom flask -Energy regulator with corresponding lamp indicator to control temperature -Temperature   Range: Up to 400º C Working Sizes 50 100 250 500 1 2 3 5 10 20 50 100 200 Aluminum body with epoxy powder coat finish Fiber glass net with long lasting nichrome heating element High grade glass wool insulation Suitable for round bottom flask Energy regulator with corresponding lamp indicator to control temperature Temperature   Range: Up to 400º C Features Working Sizes 50 ml 100 ml 250 ml 500 ml 1 liter 2 liter 3 liter 5 liter 10 liter 20 liter 50 liter 100 liter 200 liter

• Frequency: 50/60 Hz
• Product Type: Induction Heater
• Power Rating: 3,6 kVA
• Voltage Current: 230V/16A
• Dimensions: 460x240x280 mm,18.1x9.45x11.02"
• Pole Section: 40 mm 1,6"
•  :  

Hot Water Heat Pump, solar cooking systems, wind solar hybrid systems

Ibr Boiler

Electrical Super Heater