Centrifugal Pumps Dealers in Gondal Road, Rajkot (52 products available)

Axial Flow Pumps or Propeller Pumps allow fluid to enter the impeller axially. They discharge fluid nearly axially, pumping the liquid in a direction that is parallel to the pump shaft. An axial flow pump is also called a propeller pump because the impeller works much like the propeller of a boat. The propeller is driven by a motor that is either sealed directly in the pump body or by a drive shaft that enters the pump tube from the side.Axial flow pumps use the propelling action of the impeller’s vanes on the liquid to develop pressure. Axial flow pumps can be adjusted by changing the pitch of the blades on the propeller. This makes them useful for either high-flowlow-pressure applications or low-flowhigh-pressure applications. Axial flow pumps are frequently used in industrial settings as circulation pumps that work in conjunction with sewage digesters or evaporators. Axial flow pumps are also used in heat recovery systems, nuclear reactor water circulation, and high volume mixing applications. Axial flow pumps can also be used as a liquid pump for ballast control in marine applications.Axial flow pumps use the propeller action to draw water into the pump by suction. An axial flow pump can be designed as a suction pump that draws water in through one end and discharges it out the top of the pump. However, axial flow pumps are not typically used for suction lift applications. Axial flow pumps used for pumping clear water or storm water may also be submersible. A submersible pump that uses an axial flow design is common in irrigation and drainage applications. Axial flow pumps may also be used as a sump pump in some industrial applications to circulate slurries or wastewater or to drain storm water from sump pits or waste storage lagoons. Axial flow pumps are typically used in high flow rate, low lift applications. A mixed flow pump similar to a turbine pump may be used as a well pump provided the well is not too deep.

• ENGINE: 5 TO 10 H.P.
• SIZE: 3" X 3" TO 6" X 6"
• MODEL: JKSDSP

model clarification :- 1.    jkcdsp - jkson centre delivery single pulley 2.    jkcdtp - jkson centre delivery two pulley 3.    jksdsp - jkson side delivery single pulley 4.    jksdtp - jkson side delivery two pulley 5.    jksdsp (v-pulley) - jkson side delivery single "v" pulley

Centrifugal monoblock pumps IMPELLER : Graded Cast Iron and Dynamically Balanced,SEAL : Monoblock Pump with Asbestos Gland Packing & Mechanical Seal,WINDING : Super enameled EC Grade Copper Wire.

Our centrifugal pumps are generally used in Agriculture, Aquaculture, Farm Houses, and Irrigation etc, to get water from Dam site, ponds, Canals, bore wells etc. Our range of Centrifugal Water Pump is known as Double Bearing oil seal type. Our pumps can be coupled directly with Petter or high speed diesel engines. Further our Centrifugal water pump also comes with “V” belt pulley that can be driven with V belt, tractor. Our centrifugal pumps are associated with characteristics like• Best design and look,• Higher Efficiency,• Minimum variation,• Long Life,• Designed to Prevent Overloading• Highest Discharge on Canals & Loose Water Centrifugal Water Pump Oil Seal Type DB (direct couple/pulley drive)

we are offering centrifugal mono block pumps.• 0.5 hp to 1.0 hp in single phase. • 1.0 h.p. To 2.0 h.p. Single phase, three phase • maximum head up to 60feet. • maximum discharge up to 420 litmin. • able to run in low voltage.

• Water Supply: Water Transfer

We are offering centrifugal pump. side delivery spilt casing centrifugal water pump, belt driven "c' section. required 40 hp to run pump heavy duty, long life.

• Type: Centrifugal Pumps
• Usage: Water
• Weight: 100-150kg, 150-200kg, 200-250kg, 250-300kg, 50-100kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Operating Type: Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric
• Warranty: 1year, 2years

Constructional Features : (1) the Motor Withstand Wide Volute Fluctuation Between 180 to 240 Volts Single Phase and 380 to 440 Volta?s Three Phase (2) En-8 Grinded Shaft (3) High Grade Stamping Used (4) all the Casting Parts are Made Up of Graded Material Class Insulation

• Type: Centrifugal Pumps
• Usage: Water
• Weight: 100-150kg, 150-200kg, 200-250kg, 250-300kg, 50-100kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Operating Type: Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric
• Warranty: 1year, 2years

Material Specification   MOTOR BODY : Graded Cast Iron STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hourt ROTOR SHAFT : Stainless Steel 420 H&T IMPELLER : Graded Cast Iron and Dynamically Balanced BALL BEARING : Reputed Make ZZ Ball Bearing SEAL : Monoblock Pump with Asbestos Gland Packing & Mechanical Seal WINDING : Super enameled EC Grade Copper Wire Application   Domestic Fountain High Rise Building Construction Agriculture Drip & Sprinkler Irrigation Irrigation Water Circulation Rural Water Supply Schemes Industrial Water Supply Process House Booster Application High operating efficiency resulting in lower power consumption Good suction lift characteristics Dynamically balanced rotating parts including rotor & impeller Balanced and rigid construction   Squirrel Cage Induction type totally enclosed Motor (TEFC). Single Phase with running Capacitor. It also works on Low Voltage. Easy installation and easy Servicing.

Centrifugal Monoblock Pumps are replacing centrifugal pumps at a number of places because of some of the inherent advantages, such as. Low cost. No centrifugal switch. Salient Features of Centrifugal Monoblock Pumps Uni-casing no air lock problem. Balanced and rigged construction. No centrifugal switch. Less operational and maintenance cost.   APPLICATION OF CENTRIFUGAL MONOBLOCK PUMPS Industrial & public water supply schemes, Domestic water supply, Lift irrigation schemes. Drip/ Sprinkler Irrigation schemes, fire lighting, booster application, cooling water. Circulation, Ornamental fountain installation and air conditioning plants. Dewatering of mines, offshore, platforms, etc. Construction of Centrifugal Monoblock Pumps Wet squirrel cage induction type, water cooled, water lubricated motor. All bearings are water lubricated. # Due to continuous efforts in improvements, information furnished above is subject to change without notice

• GREEN: YELLOW

We are engaged in manufacturing and supplying a wide range of belt driven centrifugal pumps, couple centrifugal pump & direct coupled centrifugal pumps. All these products are singles stage type pumps that have radial flow and are available with suction type with horizontal shaft and vertically split casings. Come with common base plate, our pumps are also equipped with pulleys or with flexible couplings that are driven by electric motors or diesel engines. Salient features : › high efficiency over different operating conditions. › easy to install. › simple, economical and adaptable to different climatic conditions.

• Color: Blue
• Brand Name: msv

We are offering domestic monoblock pumps are replacing centrifugal pumps at a number of places because of some of the inherent advantages.

Kirit & company is an isi 6595 part-1 certified world class pumps manufacturer in india. The objective has always been on creating value by offering customized and cost effective range of products for the desired pumping requirements. with decades of experience and expertise, our range covers varities of centrifugal pumps. We also manufacturer special purpose pumps and pumps spare parts like, body, propeller, seals, glands, etc. The innovative range of pumps caters to numerous critical applications in the industry. Kirit & company has always been a suitable partner for providing solution engineering, lifelong performance and service support for the industry’s pumping needs. Industry majors’ preferred choice and world’s renowned consultants' approvals stand testimony to the fact that our pumps are widely accepted for quality and provide value for money. understanding the application and the customer's needs has been at the core of all the activities at kirit & company. We, at kirit & company, understand your specific needs better than anyone else. Every product supplied by kirit & company is selected by thoroughly studying the liquid being pumped, the pumping system characteristics and the surrounding conditions that may affect the optimal performance of the pump. our expertise in mechanical and hydraulic design, in addition to one of the widest arrays of material options in the pump industry, help you select the right pump thus enabling the transfer of the water from the desired point to the required point in the most efficient and cost effective manner. the highest level of quality assurance procedures are followed in making every pump which ensures that there are no deviations from the customer’s expectations and that the products perform their desired duty with a high level of reliability and durability.

Domestic Water Pumps, Horizontal Openwell Submersible Pumps

Regular Centrifugal Pump Set, Portable Aircooled Diesel Engine, O Ring

Extruded Rods, tubes, Wire, Ingots

Marine Oil Cooler, Marine Pump, chain pulleys

self priming centrifugal pumps, Pvc Plumbing Pipes, Hose Couplers

Pump, Photocopier Paper, V3 Submersible Pump, V6 Submersible Pump

Openwell Pumps, Submersible pumps

Openwell Submersible Pump Set, Three Phase Openwell Submersible Pumps

Pump

Pump

Shine Gold, Shine Cop, Self Priming Pump, Silver Bars, Kitchenwares

Pump

Lister Type Diesel Engine, Pitter Type Diesel Engine, Diesel Engine

Diesel Engine, Diesel Generator, Petrol Engine, Marine Engine, Water Pump