Test Chamber Dealers in Thane

Capacity: 100 - 400 liters Temperature range: -70°C to 200°C Humidity range: 40% to 98% @ 20°C to 60°C. Rate of Heating & Cooling: 1°C min, 2°C min, 5°C min & 10°C min.

"Classic Scientific” makes Laboratory Environmental Test Chambers, which are designed to suit the multi- application in the growing field of Medical, Agricultural, Industrial, Research Laboratories, Metal Treatment, and Various Industries. Our offered Environmental Test Chamber has carved an edge in international markets on the base o their apt functioning at low maintenance. These Environmental Test Chambers are also helpful in maintaining the climate conditions, which is one of their unique features. Traits :- Temperature + 100C to 600CHumidity (R.H.) 40% R.H. to 95% R.HDigital Display Electronic Temperature cum R.H(Humidity) Controller with an accuracy of +/-0.50C & +/-3% R.HMild Steel Powder Coated / Stainless Steel Matt Finish Used at :- MedicalAgriculturalIndustrial Research LaboratoriesMetal Treatment Specifications :- ModelsCS-03aCS-03bCS-03cCS-03d ChamberVolume90.0ltrs.170.0ltrs.285.0 ltrs.340.0ltrs. CubicFeet361012 Internal Size cms.40 X 40 X 5750X 40 X 8557X 57 X 8860X 60 X 95 ExternalSize cms.53X 68 X 13563X 68 X 16370X 85 X 16673X 88 X 173Shelves2233 Range+ 100C to 600CController Accuracy+/-0.50C of set value for Temp./ +/-3% R.H. (Humidity)Uniformity+/-1.00C for Temp +/- 3% for HumidityAir Heater ElementSpecial Type S.S. Tubular Air Heaters with fins.Heat up Time30 min. up to 600C without load.Cool Down time30 min. upto + 100C without loadCoolerPlate Fin CoolerCompressorHermetically Sealed Brand New Kirloskar CompressorControllerDigital Display Electronic Controller.SensorPt-100 for Dry & Wet Bulb / Capacitor type for Humidity.Internal ChamberStainless Steel 304 / 316L quality.ExternalMild Steel Powder Coated / Stainless Steel Matt Finish.InsulationBodyPuf 50mm / Glass Wool 65mmDoorThermo Cole.Inner Acrylic DoorInner Full Size Sea through Acrylic 8 mm thick.CirculationMotorizedBlower from backAirCirculation Motor1/12 Hp, 1440 R.P.M.Steam Injection SystemI.S.I. Mark Kettle HeaterWater tank Cartridge Reservoir4 ltrs4 ltrs9 ltrs9 ltrsBoiler4 ltrs4 ltrs9 ltrs9 ltrsWater qualitypH6.2 to 7.2Safety DeviceWater Level alarmOptionalImported Sensor0 to 100% R.H., Accuracy of +/-2%Computer InterfaceRS 485 / RS232 interface for multiple / single communication port.Safety DeviceThermostator Energy Regulator.  Over heating or humidity soft alarm.CyclicTimer0to 24 hrs X 7 days cyclic ON / OFF timer for illuminating condition.Capacity(watts)2000275032503750PowerConsumption9amps12 amps14 amps17 ampsNetWeight85 kgs90 kgs105kgs117kgsElectricrequirements AC230 V & 50 Hz cycle.

Our Low Temperature Brittleness Test Chambers are designed for testing of different types and methods related to Rubber, Rubber products and all Industrial allied products. The company stands tall among the eminent Manufacturers, Suppliers and Exporters of Low Temperature Brittleness Test Chamber from Maharashtra, India. Testing can be carried out as per IS 3440, ASTM D-751/2137 (Method B) and many more test methods used for cold test. The chamber of the Brittleness Test Chambers maintains a uniform atmosphere of cold dried air at specified temperature.   Trigger Gun :The above equipment has available with Trigger Gun to test low temperature brittleness. The trigger gun is fully made of stainless steel as per ASTM - 2137 test methods. It will give impact on test sample at low temperature. The trigger gun can be fixed on low temperature chamber, and it can operate outside the chamber without disturbing the cold temperature.

We bring forth advanced Photostability Test Chamber for our valued customers. Photostability Test Chamber conforms to the ICH, WHO guidelines, and USFDA requirements. Made from quality metal, Photostability Test Chamber is sturdy, strong and corrosion-resistant. Photostability Test Chamber is designed to pursue stability and shelf life studies of drug and other such substances. Photostability Test Chamber can be used for seeds testing, biological studies, testing on electronic & mechanical components. Features : Unique airflow system ensures even distribution of humidity and temperature Eco-friendly refrigeration system with time delay Display of set value and process value Castor wheels for ease of mobility Formed - In place PUF insulation ensures temperature stability and reduced energy consumption Precise control of temperature and humidity by using CE approved micro controller based PID controller (Imported, Auto tuning type) Refrigeration system with CFC free compressor and R-134a

We offer Environmental Test Chambers. The REMI Humidity Chambers are designed for testing of electronic, electrical components, corrosion studies on mechanical parts, shelf life studies on paints, varnishes and cement at respective manufacturing facilities. These chambers control precise temperature and humidity. Seed Germinators are used for germination & biological studies, which includes Fluorescent lights coupled with 24 hours cyclic timer for lights on off regulation. These chambers are available in standard & GMP versions.

We are leading Rain Chambers, Manufacturers, Suppliers & Exporters Located in Dombivli Dist. Thane, Mumbai India.   As per IS 10322 / IEC 60529 IPX3, IPX4, IPX5, IPX6     The apparatus will consist will consist of an oscillating pipe of stainless steel 304, formed in to semi-circle having radius of 900mm   The pipe will be oscillated so as to describe an angle of 60 deg and 90 deg max up to 150 deg. C from vertical line in both the direction. The duration will be about 2 to 4 seconds. The pipe will be provided with holes of 0.4mm dia at a pitch of 50mm. The pipe will be provided with end connections which will be mounted on suitable two horizontal pipes with coupling to circulate the water in the semi circular tube.   The driver will be through geared motor.   The pump with by-pass valve will be provided suitable to be used for both rain proof apparatus as well as jet proof apparatus as per IPX6.   A panel will be provided with gauge to indicate the water pressure.   Timer will be provided of 0 to 30 minutes to set spray time and ON/OFF switch also will be provided.  

Construction : Double walled, inner S.S.304 / 316* grade and outer S. Steel or GI dully Epoxy Powder coat / finish, gap filled with Glass wool insulation (PUF in situ foam*) Inner full length viewing glass / plexi door or viewing window on outer metallic door provided. (To select while ordering) Leak proof positive locking arrangment for door. Chamber illuminated with bulb. Cooling -CFC free* Refrigeration :  By Hermetically sealed brand new ISI marked compressor coupled with air cooled condensing unit fitted with Motor, fan blade, Electrical Accessories etc.. Mounted on bottom of unit on heavy base frame.   Humidity : Humidity Created with Steam & Injection into working chamber.   Heating : By long lasting S. Steel Tubular Heater with fins.   Temperature Control : Electronic Digital Temperature Controller-Cum Indicator with Dry Bulb & Wet Bulb Principle. (Direct %RH setting optional)     Optional :   Strip Chart Recorder for Dry & Wet Bulb or Dry & %RH Higher Temperature Upto 700C ( RH ranges as Std ) Complete S. Steel Unit / GMP Models Any other sizes or other temperature range available on request. Micro controller based PID Controller with Printer Interface (Centronic Port) compatible with EPSON / WIPRO Micro controller based PID Controller with RS-232 C PC Interface / RS-485 Interface for multiple  networking of controller. mP Profile Controller for cyclic applications (Ramps & Soak)

Environmental Test Chambers, Design Consultanc

We are offering environmental test chamber with Leak proof positive locking arrangment for door. Chamber illuminated with bulb.

Environmental Test Chamber, Calorimeter, Digital Photo Fluoromete

Environmental Test Chamber, Auto Conductivity Meter, Laminar Flow Benc

Environmental Test Chambers, Smoke Density Tester, Hydraulic Tensile Teste

Environmental Test Chambers, Multi Tube Vortex Mixe