Turing Machine Dealers

This ring sizer is used for reduce and enlarge rings smoothly and accurately. The reversible base plate has smoothly-honed reduction dies which will not scratch and reducing bands by compression. This compact model assures the finest quality.

Features & Specs: A twin station concept – one station to bore and face the front end of the job, the other to bore and face the rear end of the job. Each station has 2 sets of compound slides with servo driven cross and longitudinal axes. One set of compound slide does facing while the other will be used to bore. Both the facing and boring slides will work simultaneously to reduce the cycle time. Slides made of male, heavy duty, extra rigid, case hardened guideway strips and female turcite lining. Many innovative design features for reducing the cost, without diluting the stock removal capabilities within the specified time. Sequence of operation: Manually load cast job onto left hand chuck & on the auto-cycle button. Job gets clamped automatically & head stock starts rotating Machining of the face & ID of the front end of the job takes place. While machining on LH station is going on, operator loads an ID machined job on RH station. On the auto-cycle button & rear side machining of the job takes place in the RH station. Cycle Time: Every 75 seconds, one rough turned component is achieved. Conclusion: The customer is now getting a rough turned component at the rate of 1 piece/75 seconds, compared to the earlier 1 piece/10 minutes. i.e. a cycle time reduction of 87.5% A comparatively less accurate, highly affordable, Stock Turning CNC SPM is expected to result in elimination of 8 high end, accurate, expensive CNC turning centers, which are hitherto used for rough turning operations. Reduction in man power – 8 CNC operators along with 8 turning centers are now available for more gainful work. Increased output. After rough turning in our machine, finish turning is carried out on CNC tuning centers, thereby cutting down the whole cycle time from 1 piece/12 minutes to 1 piece/3.25 minutes. i.e. a cycle time reduction of around 73%.

We have introduced Gang tool type CNC tuurning machine for micro components production work, to meet performance with economy with agility. Ideal for any type of material hard soft, ferrous, non ferrous, Plastics, composites Following are brief specification of this Gang Tool CNC turning machine Nos. of controlled axis : 2 Axis Simultaneous, 6 + 1 axis expandable / Live Axis Ready Working : 300MM X, 150MM Z by Precision LM Guide-ways & Ball-Screws Max turning Diameter : Ø50MM x150MM L Spindle :Super Precision Cartridge type 1000RPM-8000RPM Variable [Custom Power & RPM Available to match your requirements] Chuck Type : ER40 collet or 4″ 3Jaw precision Self centering chuck [Hydraulic chuck on request] Referencing : Automatic Homing of all axis at machine startup, software limit implemented for error free over travel limit reset Resolution : 0.0001MM or INCH unit Programming : STD ISO G-Code, M-Code Axis Feed control : 0-300% of programmed feed in increment of 1% Spindle Speed control : 0-300% of programmed RPM Spindle Control : By M3-4-5 group Code Coolant Control : By M7-8-9 group Code JOG Control : Incremental move and continuous move with 0-100% adjustable feed rate Screen : 15.6” 16.7M High Contrast LED Display Tool path display : 7” Color Program memory : Practically unlimited program memory up-to 40GB of free space External Program Input : VIA LAN or USB Storage Devices