Back Back
Cable Float Switch
Get Price Quote
series cfs cable float switch no hazardous mercury, adjustable counterweight cable float switch control the level of liquids in filling or draining reservoirs and tanks with the series cfs. The mercury-free switch is designed with an inverter microswitch housed in a polypropylene cover. The unit includes a counterweight to adjust the stop and start levels of pump up/pump down application. installation instructions: the installation is very easy by holding the cable with a small clamp in the reservoir or container. by fixing the counterweight to the cable, at a closer or farther from position float, the desired differential between the highest and lowest level can be freely adjusted. Several differentials between levels, against counterweight-to-float distance are given: installation of counterweight: insert the cable in the counterweight, from the conical part and rotate it, thus causing the plastic ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. force the counterweight on the ring by rotating it, using a slight pressure. if the counterweight position is to be changed, the counterweight should be retracted, the ring position changed and secured once again. other details: modelcable length cfs-26.5 ft (2 m) cfs-10 32.8 ft (10 m) related products model fpc-1200 duplex pump controller model fpc-1200 duplex pump controller series qpc quadraplex pump controller series qpc quadraplex pump controller series sld single channel leak detection relay series sld single channel leak detection relay series dpc duplexing pump controller series dpc duplexing pump controller series dld dual channel leak detection relay series dld dual channel leak detection relay
Side Mounted Level Switch
Get Price Quote
Best Deals from Level Switches
Intelligent Level Switch
10,000 - 80,000 Per Unit
1 Piece (MOQ)
Baumer Top Mounted Float Level Switch
5,000 Per Piece
1 Piece (MOQ)
Float Switches
185 - 325 Per Pc.
10 Pc. (MOQ)
These Float Switch are used to control liquid (Water) level in storage tanks. Available in 2mt. To 10 mt. Cable length.
Float Switch
Get Price Quote
1 Piece (MOQ)
Magnetic Level Switch
Get Price Quote
Malhotra Bros & Co. is a well-known Magnetic Level Switch Manufacturer and Supplier in Delhi. The Magnetic Level Switch goes through several quality-checks, which ensure its top-notch quality. The Magnetic Level Switch is an economical, maintenance free and reliable device used for high, low or intermediate point level switching. The Magnetic Level Switch is for tanks with inaccessible tops or bottoms and where insertion depths of top mounted models are exceeded. Construction & Operation Compact and rugged construction, consisting of a free moving float assembly and a switch enclosure in non-magnetic material to achieve undisturbed magnetic flux. It employs dual magnets- one carried out by the float arm and the other by the contacts carriers, housed in the switch enclosure. A change in the liquid level brings the like poles of the dual magnets opposite to each other, and resulting repulsion force ensures a change-over of contacts, of the switch housing. These Magnetic Level Switches come in various non-magnetic materials and construction styles to suit board range of medias/applications. It is designed to provide high repeatability and to minimize effects of shock, vibration & pressure. Installation Mounted internally or external through a chamber. External mounting is resorted to, where space is a limiting factor or mechanical devices like stirrers operate within the tank. Besides, in applications like boilers, reaction kettles etc., with external mounting, isolation are possible for regular servicing The switch is normally side-mounted; however for applications like slurry, vertical-installation is preferred On no account must a switch be used for the direct starting of burners, heaters, Motor-pumps, alarm, It is essential that the contacts are wired in series with the relay coil (N/V coil) in a contactor starter Applications Manual start & auto off in storage tanks Oil storage tanks to indicate high level, low levels or filling the tanks automatically Condensate receivers to control the operation of an electrically driven condensate pump Main water storage tanks to control the action of the pump used for filling or emptying the tank, automatically In baby boiler auto control of Pump motor & Electric Heater For the control and indication of liquid levels in vessels under vacuum In storage and service tanks on board ship to give indications in the Engine Room when the level in the tank is too high or too low Where a number of level switches are employed they can be supplied together with a suitable indicator and Alarm Panel embodying signal lights and an audible alarm system.
water level switches
Get Price Quote
200 Piece (MOQ)
Pizzato FX521-M2 position switch
900 Per Piece
1 Piece(s) (MOQ)
Float Switch
Get Price Quote
We are offering float switch. Float switch can be used to control a pump for either tank fill or tank emptying (a high or low level cut out) between ranges of 50 to 1000 mm. The contact is made using a micro switch activated by the rocking motion of the arm with the rise and fall of the float.
Cable Float Switch
599 Per Piece
500 Piece (MOQ)
Side Mounted Level Switch
Get Price Quote
It is an economical, maintenance free and a very reliable device used for high, low or intermediate point level switching. It is ideal for tanks with inaccessible tops or bottoms and where insertion depths of top mounted models are exceeded. The construction is compact & rugged with a free moving pivoted float assembly. The Switch assembly is mounted in a non-magnetic material to achieve undisturbed magnetic flux. It employs dual magnets, one linked with the float arm and other by the contract carriers housed in the switch enclosure. Change in the liquid level brings the like poles of dual magnets opposite to each other & resulting repulsion force ensures a changeover of contacts with snap action. The magnetic transmission is gland less so there is no scope of leakage from vessel into switch housing. These switches are manufactured in various materials and enclosures to suit broad range of media/applications. They are designed to provide high repeatability and to minimize effects of shock, vibration & pressure. Most economical, maintenance free and a very reliable device for point level switching Dual permanent Alnico magnets +/-2 mm repeatability 40/50/65/80 or 100 NB Flange drilled to ASA 150# Cast Al, weatherproof to IP 56/IP65 or ex-proof Gr. IIA & B or II C Enclosure 3/4" ET / 1/2" NPT Electrical connection SS 304/SS 316/SS 316L/PP/PTEE Float & Wetted Parts 0.6 min Sp. Gr Depending upon float material and dimensions Micro switch rated at 5 Amp, 220 VAC, SPDT/DPDT/ Air break type also available Load /Insulation: Resistive, 150 Mega ohms at 1.5KV Internal and External mounting through a chamber/Cage 20 KG/cm2 max pr at ambient temp. Special design available for higher pressures 150oC max temp for standard model & upto 350oC depending upon float material, switch elements and mounting
Float Switch
175 Per PCS
Material PUR Model Name/Number GP-02 Switching Current 220VAC Usage/Application INDUSTRIAL Brand SIBASS/ GREENPOWER Country of Origin Made in India
Level Switches
Get Price Quote
We are stockiest and suppliers of standard Level Switch of branded Indian make.
rf level switch
Get Price Quote
A Reliable Level Switch Based on Radio Frequency principle for Solids, Liquids, Slurries. Levsen RF Level Switch comprises of an electronic controller, a sensing probe and coaxial cable for the connection of the electronic controller to the probe. The Electronic Controller provides RF signals to the probe and measures the changes in parameters provided by the sensing probe mounted in the material (to be measured) container. The sensing probe does not contain any electronics.
Full rotation rotary switch 12 position
Get Price Quote
1000 Piece (MOQ)
Cable Float Level Switch
2,000 - 50,000 Per Piece
Float Switch
Get Price Quote
Installation of modern packaging facility assists us in meeting standard as well as tailored packaging requirements of the patrons. In addition, our professionals ensure safe packaging of the products. With the aid of our smart logistics network, we can easily furnish quick and massive requirements of the buyers Electrical Characteristics : Contact Form - Both Normally Open & Normally Close - SPDT Contact Rating, Max` - 13Amp @ 120/240VAC 1/2 HP Switching Voltage, Max - 260VAC Ideal Operational Rating - <240VAC, <6Amp AC Life expectancy-Switching cycles, Min - 0.5 x106 Installation - Vertical Wire length - 2/3/5/10 meter Material : Housing - ABS Shell impact resistant Cable - Neoprene Jacketed
Metal Float Switch
Get Price Quote
Our company is reckoned among the trusted Manufacturers, Exporters, Importers and Suppliers of Metal Float Switch. The Float Switches we make available are accredited for their high corrosion resistance and excellent quality. Buyers are free to place bulk orders of the Float Switches with us and we ensure their timely execution within the stipulated timeframe.
Low Level Switch
Get Price Quote
We are listed as the renowned to offer an excellent quality gamut of Low Level Switch. Our entire product range is designed and manufactured by our highly skilled technicians using premium grade factor inputs in accordance to the set industry norms. This switch is extensively used in drinking water to sewage, tanks and basin level control and also to protect overfill situations. Moreover, the offered switches are available in various specifications and can also be customized as per the details specified by our clients.
Level Switch
45,000 Per Piece
Cable Float Switches
Get Price Quote
Water Level Float Switch
Get Price Quote
Water float switch or water level controller is a handy , easy to use controller to operate the overflow of water in tanks . The length of cable available is 2 meter . 3 meter and 4 meters .
Sapcon Side Mounted Level switch
Get Price Quote
Float Switches
Get Price Quote
Float Switches The float switch is application in all those cases where it is necessary to control the level of non-aggressive liquids, both in civil and industrial facilities (wells, cisterns, cesspools, sewers). Has a high resistance to most acids and bases mineral up to 10% concentration. The housing of the float is made of polypropylene copolymer: it is impact resistant, suitable for contact with food and nickable by solvents at room temperature. Degree of protection to "CEI 64-8" - IP 67 (immersion up to 20 meters). Maximum operating temperature: 70 ° C. Cable lengths available: 0.5 to 20 m (different lengths on request). The neoprene cable H07 RN-F 3 × 1 mm is IMQ and TUV approved. The counterweight, if required, must be ordered separately.
vibrating fork level switches
Get Price Quote
Thorough metal construction, sturdy and durable No calibration necessary, user friendly Large vibrating range and the amplitude up to 8mm for the weak sticky materials hanging on the fork. Adjustable amplitude for distinguishing from the density of different substances. Ultra red LED offers a immediate warming for the operator to control the measurement. Flexible AC, DC power input makes not only less inventory but broad application. Various output modes, flexible use. Suitable for measurement of level of liquid, particulate and dense materials. Available to detect solid substances in liquid. Protection classification: IP67. Certification: CE, RoHS
2 Position Selector Switch
65 Per Piece
500 Piece (MOQ)
RO Float Switches
Get Price Quote
We make available RO Flat Switches at affordable prices. Assistance of warehouse management software helps in minimizing the efforts of the personnel and ensures the safe storage of the lot. Moreover, our experts keep a stringent check over the same. Buyers are free to place orders, safe and timely deliveries are guaranteed with us.
Cable Float Switch
Get Price Quote
Vibration Rod Level Switches
Get Price Quote
