Air Pollution Control Equipment Dealers in Ahmedabad

Valgro "DuKlean" dust collector system used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air cleaners, which use disposable filters to remove dust. These Dust Collectors are specially designed for collection of dry ferrous dust generated from buffing and polishing and grinding process Mobile Portable dust collector system Low Noise: Below permissible noise level High Filtering Efficiency. Cotton filter bags reducing fire hazards. Energy Saving: Less Power consumption. Standard Accessory: Flexible Pipe.   Kindly Note; The effectiveness of any type of Dust Collector depends on a number of factors such as the design of Suction Inlet, proximity of Suction Inlet to the point of dust generation & Suction in the direction of dust generation. The suction capacity of the Dust Collector viz: 1,2,3 HP as required. The efficiency available on Dust Collectors is 50 to 60% normally.  

The multi-tube shop-assembled Dust collector BALKRISHNA consists of a housing containing a number of collection tubes, each of which is, in fact, a centrifugal dust collector. The dust laden gas entering the dirty air plenum moves downwards into the collecting tube, being guided by a helical veined annular ring. These vanes impart a smooth spiral movement to the gas, setting up a high centrifugal action.  As the gas descends in a cyclonic pattern, the dust is thrown outwards and is discharged through peripheral slots in a shave-off boot. A vortex is formed at the bottom of the centrifugal tube and the clean gas forms an inner whirl which ascends vertically into a discharge (outlet) tube, and then collectively out of the unit through the outlet plenum.  All the collectors are completely assembled to the extent practical for shipment, resulting in minimum erection man-hours and handling at the installation site.  can cause a reduction in thickness by 3 mm, leading to tube failure in a shorter time due to wear and tear. Replaceable dust discharge boot - saves on replacement cost. Wear due to Abrasion is maximum at the base of a collecting tube. A sturdy cast iron bolt table boot at the base of the Dust clone facilitates quick, economical replacement. Peripheral dust discharge - avoids dust re-entrainment. Integral mounting flange - effective sealing. There is an integral collar with lip and four holes for bolting. 

Dust particle generated during grinding or polishing is a major challenge in many industries. Clutch plate and brake shoe manufacturing units generate large amount of particulate matter. Dust Collection Systems such as cyclones and bag houses are the corrective measures to handle the problem.

Electrostatic Precipitator (ESP) or electrostatic air cleaner is a kind of particulate collection device that removes particles from a flowing gas like air using the force of an induced electrostatic charge. Our Electrostatic Precipitator is a highly efficient filtration device that minimally impedes the flow of gases through the device and easily removes fine particulate matter such as dust and smoke from the air stream. In comparison to wet scrubbers, an Electrostatic Precipitator applies energy only to the particulate matter being collected.

the well known manufacturers and suppliers of Acid Fume Extraction System For HCL Acid. It is utilized to extract fume from numerous industrial chimneys. Our acid fume extraction system is easy to maintain and can dispatch optimum performance consistently. This is efficiently manufactured by making utilize of the best quality components with the aid of ultra modern techniques in line with set industry parameters. Moreover, our engineers are capable of developing a custom-made acid fume extraction system For HCL acid to the patron within promised duration.

Widely used for low air suction capacity with single bag construction. Statically balanced high speed impellers give vibration free efficient suction. Model No. DC-21.in, DC-31.in

Ash Conditioners are designed to work on a continuous basis accepting a controlled feed of material from a Screw Conveyor, Chain Conveyor, Rotary Valve, etc. TRIMECH manufacture and supply our client superior quality Ash Conditioner , Due to high quality and durability this Rotary Ash Conditioner is famous among its user.

we are a highly acclaimed air pollution control equipment supplier from ahmedabad. The air pollution control equipment includes multi cyclone dust collector, multiclones dust collector, cyclone dust collector, grit arrestor, wet de-duster, spray tower, ventury scrubber, reverse flow fabric collector, mechanical shaking fabric filter, pulse jet collector etc. The air pollution control equipment is sourced from the best manufacturers in the industry. The air pollution control equipment is available at the most reasonable price in the market.

The machine consists of an impeller enclosed in an impeller housing with a suction and exhaust port. As the impeller rotates at a high speed, a partial vacuum is created in the impeller housing and atmospheric air is sucked in from the suction port and exhausted from the exhaust port. This air suction is used for doing useful work. The machine is basically a vacuum cleaner, the suction side of which is used for cleaning purpose. It is connected to the tablet/polishing machine by a hosepipe from where the de-dusted powder is sucked out and collected. Dust Extraction Unit Salient Features Machine provided with wheels for easy maneuverability Compact size with minimum floor area occupation Very little maintenance required except periodic cleaning  

From Large, Multi-stage Scrubbing system to Simple Effi cient Filtration system; We can deliver a customized odor control unit to suit your site.  Awatech offers innovative and effective odour controlling using a modular approach i.e. flexible, efficient & lowest capital cost. Our systems are built to provide consistent, proven, long-term removal of inorganic as well as organic odors.Awabioair Odour Control Systems Include : Large, multi-stage scrubbing systems for chemical applications Bio-filter and bio-scrubber systems Simple & Efficient activated carbon and dry media filter systems Why Awabioair? Because Our Odour Control Systems Are : Customized by our experts to eliminate the odours up to required standard Enhanced for high odour loading Optimized for low capital, operation & maintenance cost Tested as per regulatory requirement Supported by our expert technical team Application : Waste Water Treatment Plants Sewage Networks and Pumping Stations Chemical Industries Composting Operations, Etc.

Air classifiers are commonly employed in industrial processes where a large volume of mixed materials with differing physical characteristics need to be separated quickly and efficiently. One such example is in recycling centers, where various types of metal paper plastics arrive mixed together and need to be sorted before further processing can take place. Particles are reduced to finer and more uniform sizes. Use of cyclone separator leads to less dusting on output side. No dusting from feeding hopper because feeding is done under negative pressure. It runs at lower speed , hence it requires much less maintenance.

Techno Power engineering is leading dust control equipment manufacturer, pollution control system, clean room equipment, Industrial dust collectors,dust collectors, filter dust collectors, pollution control equipment and paint shop equipment in India. To assure fine performance and long functional life, we manufacture our product using quality raw material such as sheets, ISMB, ISMC, blowers and motors. Due to robust construction, negligible maintenance and cost effectiveness. Our range is widely used in Automobiles, cement, chemical, food & beverage and pharmaceutical industry.

We are Design & Manufacture Air Pollution Control Equipment like cyclone seprator, Multycyclone& Bag filter as per Required Capacity & space.Offer for Boiler House & Other Industries.

We are offering Electrostatic Precipitator. Contact us for more information about Electrostatic Precipitator and how we can deliver you exceptional services by our highly experienced engineers. Sparx Boiler is premium manufacture and Exporter Company of Electrostatic Precipitator. Get the perfect reliable, efficient, and Environment-friendly solutions for your simple to complex requirement for Electrostatic Precipitator.

Dust can be a nuisance in many different ways. Dust is not acceptable now as it was in previous decades in light of Environmental & Employee Health related concerns. Nuisance dust can be hazardous to health. It can cause unpleasant work conditions and give rise to absenteeism. There can be the risk of fire or explosion, even when the product is not something which one would think of as particularly dangerous. Dust can cause machinery to clog and to wear out prematurely, and hence need more frequent maintenance. Dust means more frequent cleaning and upkeep of factories. A Dust Collection Equipment in general is by far the most common and popular method of cleanup employed in the modern Industry. Major components of a typical dust collection system include Ducting, Suction Hoods, Dampers, Bag Filter (which further contains filter bags, sequential timer, solenoid valves and Rotary Airlock Valve) and Blower / Exhauster / Fan. The dust is captured on woven or felted fabric of the fabric filter bags as the air passes through and is used where there is heavy dust burden. These have highest collection efficiency and are now by far the most important group in industry. Dust Collection Equipments from AEGIS are time tested and are highly effective and reliable. AEGIS manufactures both centralized as well as unitary type dust collection equipments. Unitary type Dust Collection Equipment from AEGIS can be used for single or two points and comes with mobility feature and are very light weight with easy cleaning arrangement. AEGIS manufactures complete dust collection system for controlling / checking air pollution in plant / manufacturing unit. Dust Collection Systems manufactured by AEGIS can be an integral part of the Bulk Material Handling Systems supplied by AEGIS or can be installed on existing system where dusting and pollution are the problem areas.   Application   Is used where fine dust particles are released in workshop / factory / manufacturing unit Can be installed in the plant as per the availability of space Used for containing / controlling air pollution Is used in diverse industries   Advantages   Minimized Dust Emission Offers better & safe working conditions for employees Reduces Maintenance of other machinery Maintains Cleanliness Helps in adhering to regulatory requirement for dust control High Efficiency with effective dust control   Features   Superior design and workmanship leading to effective dust control High Efficiency and Economical Operation Compressed Air Bag Cleaning Easy to operate and maintain Versatile design to meet wide variety of application and dusts