Air Pollution Control Equipment Dealers in Bengaluru

We have attained a remarkable position in market by offering flawless range of dust extraction system. For removal of dust from air, a filter is ideal. We provide high quality product which is made up of premium quality raw materials. Our product is highly powerful and can easily extract all the dust from the system. These dust extraction systems are widely used for extraction and collection of dust particles with different nature and specifications.We design, manufacture, install & commission dust extraction system as required for the layout of the plant for dust and fumes. Our experienced team of design and installation of engineers will work with you to provide a system to suit your requirements and budget. The quality of our team ensures that this dust extraction system is stringently monitored on various parameters. It is extensively appreciated for its high strength, optimum performance, corrosion resistance and longer functional life. The offered system is available in various customised options as per the needs of the clients. We aim to give timely service to our client at affordable rate.

We are offering fume extractor. Power tech is not a new name in the industry. It is well known company into pollution control which manufactures fume extractors of utmost quality in india. The fume extractor’s brand name fumekiller ® is a renowned brand in the market. The company has even got fame in the international market as it not only manufactures the product but also exports it. The suction capacities of the fume extractors are quite high and ranges from 250 cubic meters hour (cmh) to 8000 cubic meters per hour (cmh).

SWELDex Welding fume extraction In order to prevent health defect from the welder and uninvolved persons, it is required to lead away welding fume by necessary precautions that the fume does not reach the breathing area of the persons concerned. Only the direct extraction of harmful welding smoke at the point of origin offers an efficient protection. SINOtec has a wide range of mobile and stationary fume filtering units. These units provide different advantages for the user. Advantages:     Extraction of contaminated air at the breathing area of the user     High effectiveness of SINOtec units due to a separating efficiency of 99.9%     Low running costs, because high supply air can be saved particularly during the heating period     Easy operation of the SINOtec units     Availability of mobile units enabling to be used at different working places     No expensive investment for pipes, ventilators, etc.      High acceptance by the user because these protection measures are for his health and security. With the various options of SWELDex fume extraction systems & with our experience, we can suggest the most appropriate fume extraction system based on your plant and welding booth surveys.

Recovery of particulate matter from exhaust gas is vital for any industry from three aspect Dust Extraction Diagram To ensure the operators health and safety by removing the hazardous fumes from the working area To avoid pollution problems Sturdy construction To increase the product quality removing fumes from the process Dust collection systems is used in many processes to either recover valuable granular solid or powder from process streams, or to remove granular solid pollutants from exhaust gases prior to venting to the atmosphere. Dust collection is an online process for collecting any process-generated dust from the source point on a continuous basis. Dust collectors may be of single unit construction, or a collection of devices used to separate particulate matter from the process air. They are often used as an air pollution control device to maintain or improve air quality. The dust generation in manufacturing process directly effects the operator�s health, can contaminate the product which is being manufacturing can make highly uncomfortable for the people in & around the dust generating areas. BATS wish to offer a solution by incorporating dust control & extraction system & ensure a safe & pure zone for the occupants. This process involves exhaust blowers, exhaust air duct work and dust collection hoods to pick up dust particles at the point of generation. In several cases, the dust collected by the system from the point of generation is routed through a filter unit which collects the dust & pure air will be exhausted to the ambient to meet pollution control.

The casing of Rotary Polygon Screen will be fabricated from 3 mm thick m.s. sheets suitably reinforced with rolled steel sections. The bottom part of the casing will be rectangular in the shape while the top part will be pentagonal or hexagonal in shape and bolted to the bottom part. Removable panels/doors will be provided in the top part of the casing for inspection purpose. A feeding/receiving chute will be provided at one end of the top part to receive sand from conveyor, elevator or similar feeding device. Provision will be made in the top part of the casing in the form of circular opening for connection to dust extraction system. The main driving shaft of mild steel will be carried at each end in externally lubricated self aligning ball bearing blocks. Keyed to the shaft will be m.s. or cast iron hexagonal hubs fixed to which will be m.s. radial arms on which will be bolted the frame carrying replaceable wire mesh screen. Product ranges from capacity of 10 tons/hr to 80tons/hr. For removal of large pieces of scrap and hard lumps of sand etc. which cannot pass through the wire mesh screen and which travel right through to the end of the screen, suitable reject opening will be provided. Drive will consist of  motor with gearbox . Necessary sheet metal steel guards will be provided over the coupling. 

Kaveri is proud to present a wide & diversified range of high performance, heavy duty sprinklers. We are pioneers in the field of sprinkler manufacturing with over 35 years experience in the field. The sprinklers are developed through our joint effort & experience of actual client requirements. We offer total turnkey solutions for all types of open & exposed dust control situations (eg stockpiles, haul roads, mines, open yards, etc). Our scope includes design, engineering, manufacture, supply & commissioning of the system. The key component of the system - sprinklers are designed to operate in adverse conditions & have protected moving & exposed parts, enabling long life. We have special solutions for specific customer requirements including aggressive water conditions.   Rugged & heavy duty system. Low maintanence system. Easy to Install. Suited for adverse duty / water conditions. System could be set to operate on Auto / Manual mode. Compatible to operate on plant PLC.

We are the reputant manufacturers and suppliers of Best Dust Collector in Bangalore, India. The Dust Collector are used in various sectors like cement industries, rolling mills, foundries etc. for removing the impurities in the air. Our Dust Collector use non-woven, polyester fabrics with antistatic properties, as the dust filtration media. These dust bag filters do not use the electrostatic filtration technique but use mechanical filter media . Suction capacities are available from 425 CMH to 15000 CMH as standard. These Dust Collector are manufactured using superior quality materials like stainless steel and mild steel. These Dust Collector Manufacturers are highly demanded for their fail proof, efficient and cost effectiveness. These are made in our advanced manufacturing unit by our expert professionals. These dust collector are used for collecting dust from: Tool and cutter grinder Buffing Cast iron machining De-burring & similar operations Chip extraction These Dust Collector can be fitted with self-balanced extractor arms of various lengths for added flexibility in capture of dust from generating sources.

Features Suitable for large amounts of coarse dust and chips, medium amounts of mixed dust with large shavings or lighter amounts of fine dust. Powerful motor features steel impeller and a sealed bearing for long lasting operation. Steel impeller is balanced and curved for optimum air velocity, noise reduction and protection against wear. 209BH model with ‘sound reducer’ unit for a quieter environment

Welding fumes can be captured and controlled using specialised welding fume extractors marketed under the brand name Fumekiller™. These fume extractors are available in a wide range of suction capacities starting from 1000 cu mtrs per hour (CMH) to 6000 cu mtrs per hour (CMH) as standard, fitted with our self balanced fume extractor arm. The welding fume extractors work on the principle of electrostatic filtration and can control all types of welding fume

We also manufacture dust collection systems. We design and manufacture cyclones, blowers, rotary air valve, aspirator systems and lots more as per the requirement of the processing plant.

As air enters the electrostatic precipitator, the particles pass through an electrical field that gives an electrical charge to the particles. The charged particles pass through a series of alternately charged collector plates. Particles are repelled by plates with the same polarity and attracted to plates with opposite polarity — similar to how a powerful magnet works.Dual-stage electrostatic precipitators include two parts: the charging and the collecting sections. In the charging section, the incoming smoke, grease, mist, and other particulates pass by ionizer wires which impart a positive electrical charge to these contaminants. The positively charged contaminants are then drawn through the collection section which contains a secondary electrical field with negatively charged aluminum plates. Since opposite charges attract, the positively charged contaminants collect on the negatively charged aluminum plates, removing them from the air stream.Air velocity: 1.5 - 2.5 m/s   • ESPs are very efficient (up to 99% efficiency)• This is more effective to remove very small particles like smoke, mist and fly ash. Its range of dust removal is sufficiently large (0.01 micron to 1.00 micron). • This is also most effective for high dust loaded gas (as high as 100 grams per cu. meter)• The draught loss of this system is the least of all forms(1 cm of water)• The dust is collected in dry form and can be removed either dry or wet.• They are generally more economical than other particulate control devices:Operating costs are reduced by low energy consumption, minimal maintenance requirements and reduced cost on spare parts• Can be designed to handle wet and dry gas compositions • Can handle large volumes of gas flow with low pressure drop • Can function at high temperatures (as high as 700 degree F – 1300 degree F)• Pressure and temperature changes are small• Difficult material like acid and tars can be collected• They withstand extremely corrosive material• Low power requirement for cleaning• Dry dust is collected making recovery of lost product easy• Large flow rates are possible• It provides ease of operation.   • High initial capital costs• Dry ESPs can only control particulate emissions, not gas composition emissions• Once installed, ESPs take up a lot of space and cannot be easily redesigned• May not work properly on high electrical resistive particles• Materials with very high or low resistivity are difficult to collect• Inefficiencies could arise in the system due to variable condition of airflow (though automatic voltage control improves collector efficiency) • They can be larger than bag Filters (fabric collectors) and cartridge units, and can occupy greater space• Dust loads may be needed to be reduced before precipitation process (pre-cleaner may be needed)• The direct current is not available with the modern plants, therefore considerable electrical equipment is necessary to convert low voltage (400 V) A.C to high voltage (60000 V) D.C. This increases the capital cost of the equipment as high as 40 to 60 cents per 1000 kg of rated installed steam generating capacity.• The running charges are also considerably high as the amount of power required for charging is considerably large.• The efficiency of the collector is not maintained if the gas velocity exceeds that for which the plant is designed. The dust carried with the gases increases with an increase of gas velocity.• Because of closeness of the charged plates and high potential used, it is necessary to protect the entire collector from sparking by providing a fine mesh before the ionizing chamber. This is necessary because even a smallest piece of paper might cause sparking when it would be carried across adjacent plates or wires

We are offering fume extraction system.aircon fume extraction system is the real solution for green revolution. With the increase in discharge of hazardous waste from various chemical process, environmental safety has been a great concern. At present the increase environmental awareness requires a good scrubbing and fume extraction system which is inevitable and mandatory part of all chemical process as well as material handling plant that may pollute atmosphere beyond permissible limit. Industries which need fume extraction system: acid manufacturers, aluminum plants, acid wash plants, iron ore, chemicals, foundaries, paper and pulp, fertilizer, acid washing before galvanizing, galvanizing plants, waste water treatment. following are some of its essential features: • corrosion resistant • dimensionally accurate • durable • high in performance • cost effective • perfectly suitable for temperature (up to 450 c) dust & all types of fumes

SHIRDI-SAI-FRP Products,fibre products,pp lab furniture,frp chemical products,frp tank,pp fume hood,pp frp blower,frp bus body manufacturer,frp chimney ,frp moulding products manufacture karnataka,india We manufacturer,supplier FRP Products,fibre products,pp lab furniture,frp chemical products,frp tank,pp fume hood,pp frp blower,frp bus body manufacturer,frp chimney ,frp moulding products manufacture in Bangalore, Karnataka. frp products,fibre products,pp lab furniture, frp chemical products,air pollution control equipment, frp exhaust system, chemical lab furniture,industrial frp products,frp bus body manufacture,frp cabin,frp chimney,frp light poles,frp molding products,frp tank,pp acid storage cabinate,pp fume hood, pp sink, pp sampler,pp scrures,pp damper,frp implur,pp frp blower, pp frp scrubber, frp bathroom, frp toilet, ms dust collector, ms blower, ms cluber, pp frp tray,pp frp dampers, epoxy scaffolding,spot extractor,anty vibration table, frp security cabin manufacturers and suppliers Bangalore Karnataka,india . An exhaust system is usually piping used to guide reaction exhaust gases away from a controlled combustion inside an engine or stove. The entire system conveys burnt gases from the engine and includes one or more exhaust pipes. Depending on the overall system design.

We understand that the use of finest grade raw material brings forth high quality product line. In addition to this, we make sure that the material is sourced from the reliable places only. To pay for an order, we can agree upon a payment method as per you and our convenience. We are okay with online as well as offline payment options and wish to make payment easy.

We are offering fume extraction system. aircon fume extraction system is the real solution for green revolution. With the increase in discharge of hazardous waste from various chemical process, environmental safety has been a great concern. At present the increase environmental awareness requires a good scrubbing and fume extraction system which is inevitable and mandatory part of all chemical process as well as material handling plant that may pollute atmosphere beyond permissible limit. Industries which need fume extraction system: acid manufacturers, aluminum plants, acid wash plants, iron ore, chemicals, foundaries, paper and pulp, fertilizer, acid washing before galvanizing, galvanizing plants, waste water treatment. following are some of its essential features: • corrosion resistant • dimensionally accurate • durable • high in performance • cost effective • perfectly suitable for temperature (up to 450 c) dust & all types of fumes

Our Fume Extractors marketed under the Fumekiller™ brand name are available in a wide range of suction capacities starting from 250 cu mtrs per hour (CMH) to 8000 cu mtrs per hour (CMH) as standard. These work on the principle of electrostatic filtration and can control fumes, smoke and microscopic dust. One large capacity equipment may be used for multiple machines for the capture and control of fumes, dust and smoke. This product is extensively used for removal of fumes, mist, smoke, fine powder, etc, from specific generating sources such as: CNC and non-CNC mcs, Electro-discharge mcs, Induction hardening.

Features Modular construction, up to 1,150 m2 filter area in a single module, capacity range in excess of 1,000,000 m3h with multiple modules. Temperature rating up to 2500C Available in filter lengths from 1000 mm to 5000 mm Uses injector nozzle pulsing for most efficient online cleaning of filters, eliminates energy sapping conventional venturi and requires minimum pulsing at large intervals saving on compressed air energy. Laser cut bag holding plates and easy to install snap band filters ensure zero leakage, critical to emission control. Long lasting, light weight, spirally stiffened galvanized bag cages minimize deformations while handling & transport. Large & high capacity rotary airlocks with adjustable vane tips for dust discharge designed to operate under (-) 800 mmwc. High capacity screw conveyors for larger modules, designed to operate without hanger bearings for maintenance free operation.

As a renowned Manufacturer and Supplier of Dust Collectors, we bring you a wide range of immaculate quality. Our skilled professionals use only high-grade raw materials to ensure that our cyclone dust collector meets the highest quality standards. The dust collectors on offer are applied in sand blasting, wood factories, marble industries & etc. These are used to break down heavy dust particle into fine dust. Then, the dust is distributed in chambers.

Manual soldering exhaust station: a workspace equipment with a fume extraction system, enhancing safety by removing soldering fumes and airborne contaminants during soldering processes.