Industrial Pump Dealers in Narol, Ahmedabad

We offers CE Approved Single Phase Rotary Electrical Actuator operated Invesment Casting Ball Valve in three piece design for multiple on-off operation in the dawn stream. Electrical Actuator Details: Manufacturer: Cair Euromatic Automation Brand / Model: Cair / MOD APPROVALS : DESIGN (TUV) / ISO 9001:2008 / CE / IEC Characteristic: On - Off Type Travel: 90 Degree Indicator: Continuous Position Indicator Phase: Single Phase Power Supply: 220V AC, 50 Hz Body Material: Aluminum Alloy Ambient Temperature: 20°C ~ 80°C Motor Insulation: Class F Protection Class: IP 67 Weather Proof Manual Adjustment: Wrench Setting Limit Switch: 1NO + 1NC output of 220V AC Position on Power Fail: Stay Put Manual Override: Provided Accessories: Modulating / Regulating Type Signal Input: 4 ~ 20 mA Potentiometer Feedback Integral Starter Unit Control Panel Spring Return Type with Battery Back-up System Size Range: 1/2" to 4" Screwed End Size Range: 1/2" to 14" Flanged End Ball Valve Details: Body: WCB / SS 304 / SS 316 / SS 304L / SS 316L Ball: SS 304 / SS 316 / SS 304L / SS 316L Stem: AISI 410 / AISI 304 / AISI 316 Seat: PTFE End Connection: Screwed to BSP / Flanged to 150# / Flanged to 300# motorized valves,motorized ball valve,actuator ball valves,ball valve actuator,actuated ball valve,

This Diesel Fuel Injection System has a sturdy metallic body with high resistance against mechanical impacts. In order to attain maximum client satisfaction, we check the product quality on several counts at several stages. We make sure that the products that we deliver will remain completely damage free as we make use of the quality packaging material and have the skilled personnel for the packing of the products.

   Offered with Closed Impeller.  2.     Impellers are provided Back Wear Ring to minimize Axial Thrust and Gland Leakage.  3.     Flange Rating PN 16 to PN 64 .  4.     Various Shaft Sealing Available are,  a.     Gland Packing (ASB. / NON ASB. depending on the service.)  b.     Moulded Graphite Rings. (GRAFOIL PACKING)  c.     Mechanical Seals.  5.     Jacketing for heating/cooling offered for S/Box.  MATERIALS OF CONSTRUCTION : ·  GRADED GREY CAST IRON ·  CF8, CF8M,  ·  GUN METAL / BRONZE OPERATING RANGE :   For Centrifugal Multistage Boiler Feed Pumps  Capacity – Q- up to 150 M³/hr.     Speed - n -  960 / 1450 / 2900 rpm  Temperature 120 ºC  Working Pressure  40 Bars  Pump sizes – DN -  32 mm to 50 mm

Small size bare / monoblac poly propelene pumps. Fitted with seal / gland or PTFE bellow Mechanical seal. Shaft is of SS-304 / 316 with ceramic coating and (PTFE coating optional) Very economical models as pumps made with minimum parts. Very easy maintanance. Performance are at 2900 RPM, 50Hz and tested with clear water. Due to constant R & D activity, details are subject to change without prior notice. Application : Phosporic acid plants, Gas washing plants, Rayon plants, caustic joda plants for corrosive acids & basics, effluent treatment handling.

We offer a wide gamut of hand pressure test pump in the market. Hand pressure testing pump is broadly used for the construction of pipes and for testing pressure. Being portable in nature, it is extremely easy to move it from one place to other. Furthermore, we are well known as one of the major portable pressure testing pump suppliers in the market. Design Features The test pump is very compact, light in weight and can be unbolted to carry easily.Stand is designed in such a way to keep on plane surface and operate without any foundation. Even in high pressure pumps no foundation is required. All the working parts are made of SS to stand the specified pressure. All joints are threaded so that any part can be replaced on the site easily. How to Operate The following instruction will help in smooth operation of the pump. Fill the tank with clean water only. If dust or other foreign particles enter the valves through water will result in pressure dropping. Before starting operation, the pressure release valve should be kept open and water should be allowed to drain out for a few strokes, then close the valve and build the required pressure. This is to remove air or else constant pressure cannot be maintained. Maximum length of the stoke can be used while beginning and should be progressively reduced when the pressure dropped. If the check valve is found disturbed and pump fails to develop pressure the valve seat should be cleaned or lapped if necessary. Suitable lubrication oil should be used to lubricate the plunger and ensure smooth operation. While keeping pump idle, apply lubricant oil and insert the piston fully in the cylinder so that water contents will not remain inside the pump and shall be free from rusting.

We are offering v9 horizontal monoset openwell pumps with ss body in three phase-415 volts in 50 hz. We have emerged as the foremost manufacturer, exporter and supplier of v9 horizontal openwell pumpset which is used in irrigation, overhead storage water-tank filling and water-curing construction sites. With the support of our adroit professionals, our provided pumpset is manufactured using the best quality components and cutting edge technology in strict compliance with industry standards. Moreover, our offered pumpset is highly acknowledged for its high performance and superior quality. Features: • corrosion resistance • rugged design • excellent performance specifications: range phase three head in meter 10 to 44 discharge in lpm 120 to 2560 h.p. 3 to 10 stage 1 outlet size 2.5" x 2.5", 2.5" x 2, 3" x 3", 4" x 4"

These are of oil-immersed, rotary vane type pumps. The rotor, with two spring loaded vanes, is mounted eccentric in the stator body. As the rotor, rotates the vanes sweep the crescent shape air space twice in each revolution. There is in-built non-return valve which prevents back flow of air. Manufactured from graded material, all moving parts are precisely machined, ground and assembled with close tolerances. This results in increased efficiency and long trouble free operating life. APPLICATIONS Distillation Dehydration and filtration processes. Exhausting Electric Tubes • GLS Lamps • Mercury Vapor Lamps and Tubes. Vacuum metaiiurgy •Vacuum Sublimation • Vacuum impregnation • Thin film Coating. Refrigerator and Air-conditioner servicing. Freeze drying of Foods.

Our JET Pumps are designed to meet the requirement of a good acid handling pump. Available in a range of three Models, developed with a main objective of attaining higher levels of corrosion resistance durability & interchangeability. Our JET Pumps are designed to meet the requirement of a good acid handling pump. JET Rubberlined Pumps are simple and reliable & bear a wealth of experience in design & manufacture. Our Pump Body & its Rubber Lined Parts are restricting the contact of corrosive liquid. Our Pump is available as a 3H.P. & 5H.P. & 7.5H.P. with minimum 2000 ltr/hr. capacity & working up to maximum 40 ltr/hr. “JET” PUMPS FEATURES : Less Expensive & Most ideal pumps than other Pumps like as a P.P./ S.S. Pumps. No requirement of foundation so easy to installation. No layout design cost due to standard dimensions. Easy servicing of damaged parts like as a bearing, impeller, & casing. Having maximum lift up solid particles due to open type Impeller. Pumps sat on heavy duty iron Channel Frame. Pump catalog diagram & Part specification to be added from catalog

Submersible Motors, Submersible Pump, Water Pump

the working parts of the shreeji  pump consists of a multi-vane impeller mounted eccentrically in a round casing which is partly filled with liquid (usually water). As the impeller rotate the liquid is thrown by centrifugal force to from a liquid ring which is concentric with the periphery of the casing. Due to the eccentric position of the impeller relative to the casing and liquid ring, the spaces between the impeller vanes fill with liquid during rotation and any air or gas trapped in the impeller space or cell is compressed and discharged from the casing through the outlet part leaving the cell available to receive air or gas as it is presented to the inlet port of the casing. In addition to being the compressing medium the liquid-ring performs three other important functions. It absorbs the heat generated by compression and friction. It absorbs any liquid slugs or vapor entering with the gas stream. It will also absorb and wash out contaminants entrained in the gas.

We are engaged in offering a wide range of Air Operated Double Diaphragm Pumps to our esteemed clients as per the quality demands. Our products are as per industry standards, and manufactured by using high grade of raw material.

“FLOWCHEM” Series PPPVDF pumps are “Centrifugal Process Pumps” in Back pull-out Construction Horizontal, Foot Mounted, Single Stage End suction and top Centerline Discharge these pumps are the most economical and efficient for pumping and Transfer Highly corrosive and aggressive liquids like acids, alkalis, effluent etc.Centrifugal Process pumps are offered with semi open impeller with `CARTIDGE’ Bearing Housing For the adjustments of impeller clearance for Prolong efficient working.

This Models Has high motor rating of 7.5kW has become a standard for vacuum ejectors for its Discharge head of 4 kg/cm².   Size: 50mm X 40mm Best Efficiency Point: 20 m³/ 40 m. RPM: 2900. Flange Connection: ANSI B 16.5 Class 150 FF.   Features:   No 1. Choice for process plants And Chemical Plants Natural's choice for pickling line in steel plants. PVDF Impeller Also available On Request.  

We are a prominent name engaged in offering high quality LS Pumps. These plums are manufactured and designed by making use of high-grade stainless steel and other materials procured from the most reliable vendors in business. Keeping in mind multifarious demands of the clients, we offer these plugs in different sizes and designs at economical price. Specifications: Compact sizeLow noise levelsWide range of low cost installation optionsReduce flow & pressure to match the load requirementsHigh power auxiliary drives for multiple pump configurationsControl system flexibility: pressure compensated, load sensing, and remote pressure compensated controls

We offer a wide range of high quality Compressor Oil Pumps to our customers. Our procuring agents ensure that the metals and alloys used for manufacturing of these pumps are obtained from trusted vendors. To ensure high quality of offered pumps, these are manufactured using advanced technology and cutting-edge machinery. In addition to this, our products are fully checked by our team of quality controllers to ensure defect-free product delivery. Features:*  Electricity saving* Force feed lubrication system* Electricity saving

These Dry Vacuum Pumps are ment to achive vacuum upto 750 mm of HG. Parth manufactures single & two stage Air Cooled, Reciprocating, Single Acting Dry Vacuum Pumps, which are ideal for Liquid Transfer, Ceramic Industries, Paper handling, Lamination Plants etc.

These Dry Vacuum Pumps are ment to achive vacuum upto 750 mm of HG. Parth manufactures single & two stage Air Cooled, Reciprocating, Single Acting Dry Vacuum Pumps, which are ideal for Liquid Transfer, Ceramic Industries, Paper handling, Lamination Plants etc.