Industrial Pump Dealers in Vatva, Ahmedabad

(234 products available)
  • Iepl Power Pressure Pump

    Iepl Power Pressure Pump

    100,000 - 200,000 / piece

    • Country of OriginIndia
    • Number Of FlowerCondensate Recovery Pump
    • ApplicationSteam Boiler Plants
    • PowerPneumatic
    • CompanyInnovative Enerpro Pvt Ltd
    • ProductMechanical Condensate Recovery Pump
    • Size1 Tph to 12 Tph
    • UsageTo transfer condensate water to boiler feed water tank
    • ProductPump
    • FuctionMechanical
    • MECHANICAL CONDENASATE PUMPThere are Condensate recovery unit or power pressure pump use for transfer steamcondensate from plant to boiler feed water tank with help of motive steam or air.Working of Principal Condensate recovery pump or Power pressure pump: There are two stage of pump working 1) Filling Mode: Condensate from process will be collected in pump receiver tank due togravity it will open Check valve and start filling pumping tank. By this time motive inletis closed and vent outlet is open so there is no back pressure. This will lead level low tohigh.2) Pumping Mode: As the level reaches set high level vent valve shut off and open the motive steam or air valve. This will allow motive steam or air in tank and push the water level in downward direction. By this time Delivery Check Valve will be open and inlet check valve shut off.When low level reached automatically repeat the cycle. I.e. shut off the motive valveand open the exhaust.In Comman mechanical pump there are mechanical assembly which are very complicated and lot of moving part. It cost is to high. Also SS float puncture with time due to constant expansion and contraction due to temperature variation.While In our system "APPLIED FOR PATENT" We avoid complication of the operation. We remove ss float which are puncher after some time. We use special material float which can operate for almost life time. So there are no wear and tear will be there so it's almost maintenance free. Our system will be working for almost it's life cycle.Features1. Pump Total Material are SS 304 Material so life is long life.2. Float material is Special Materials so it will not punctured.3. No moving part assured zero maintenance.4. Suitable for high temp. Application. No cavitations problem5. Can be operated on compressed Air.6. Various sizes for different capacities.(max. cap.12,000 kg/hr)
    ...more
    www
  • Vacuum Pump Fitted with Pulley

    Vacuum Pump Fitted with Pulley

    Get Price Quote

          We offer an extensive range of Vacuum Pump Fitted With Pulley comprising of vacuum pressure pumps, high vacuum pumps etc. We provide our Vacuum Pump Fitted With Pulley at competitive prices. These Vacuum Pump Fitted With Pulley do not require any foundation for installation  Details of our Vacuum Pump Fitted With Pulley:- * Model : KL-15NU * Displacement : 15 * Vacuum : bar : 0.70 mm/hg. : 525 * Pressure : bar : 0.55 PSI : 8 * HP/kW :1/0.75 * RPM. : 1425 * Temp. : 40-75 °C * Weight Kg. : 40
    ...more
  • Air Operated Double Diaphragram Pump

    Air Operated Double Diaphragram Pump

    Get Price Quote

    We are engaged in offering a wide range of Air Operated Double Diaphragm Pumps to our esteemed clients as per the quality demands. Our products are as per industry standards, and manufactured by using high grade of raw material.
    ...more
  • Vacuum Cum Pressure Pumps

    Vacuum Cum Pressure Pumps

    1,000 / Unit

    • Body MaterialCast Iron
    • Voltage440 V
    • Free Air Displacement CFM26
    • Free Air Displacement Ltr per Min75
    • Ultimate Vacuum mm Of Hg28"
    • Pressure PSIG10
    • Motor Reqd HP0.25
    ...more
  • Two Stage Dry Vacuum Pump

    Two Stage Dry Vacuum Pump

    5,000 - 50,000 / Piece

    • Power0.37-5.5 kW
    • Number Of StagesDouble Stage
    • MaterialMetal
    • UsageDrying
    • Max Vacuum4 Pa
    • Noise dB(A)68
    • Application Areas : Industrial Applications Food and Packaging Coating Analytical and Medical Technology Solar Cell Research and Development Semiconductor Technology Product and Application
    ...more
  • Diaphragm Dosing Pump

    Diaphragm Dosing Pump

    25,000 / Piece

    • Maximum Discharge Flow1000 LPH
    • Usage/ApplicationChemical Dosing
    • MaterialPP/ SS/ PVDF
    • Motor Horsepower0.25 to 1 HP
    • Max Flow Rate15- 1000 LPH
    • PhaseThree Phase
    ...more
  • Gas Compressor Pumps

    Gas Compressor Pumps

    Get Price Quote

      Our clients can avail from us Gas Compressor Pumps that are widely demanded by several industries and sectors. All the products are available in various models and sizes at market leading prices to meet the demands of customers. Apart from this, we stringently check and test all the compressors on certain parameters to assure zero defect. Salient Features:*  Corrosion & abrasion resistance*  Dimensional accuracy* Easy installation*  Low maintenanceAvailable With Us Reconditioned Refrigeration Compressors of following company :*  Kirloskar*  Sabroe (Accel)*  Daikin (Batliboi)*  Carrier (Voltas)*  Bitzer 
    ...more
  • Chemical Processing Pumps

    Chemical Processing Pumps

    Get Price Quote

    We are Exporter of Chemical Processing Pump accessible in miscellaneous ranges for various applications. Chemical process pump functions capably at the clients’ end. Our Horizontal Chemical Processing Pumps are pretentious using cutting-edge technology and are used in assortment of process applications in chemical, stimulant , process, printing and textile industries across the world. Our range of process pump comprises Chemical Pump, Polypropylene Chemical Process Pump, PP Chemical Process Pumps, Chemical Processing Pump, Horizontal Chemical Processing Pump, PP Chemical Processing Pumps. Our manufactured ranges of Chemical Process Pumps are highly recognized and much appreciated by our universal clients due to their various advantages. These chemical Process pumps has high capacity, requires very low power consumption, controls air pollution and also ideal for high pressure system.       Advantages of Chemical Process Pumps: Provided range facilitate effective solutions for all process industries. These pumps are designed and developed with thick walled and vacuum proof housing. This process provides smooth running and having a durable construction. It also has modular system that ensures cost effective spare parts stocking. Offered assortment provides external corrosion protection of pump against dangerous chemicals and acids. A flange with through holes meets the perfect requirements of the chemical and all process industries. Plastic housing summarize in tough material. Pipeline process of these pumps is absorbed by the metal body. Capacities of Chemical Process Pumps: 5 HP to 20HP 500 – 60,000 LPH These pumps are made available with open and closed impellers. Offered range of these process pumps can be fitted with any standard motors. Chemical Process Pumps that we design and manufacture at our production unit is appropriate for highly corrosive liquids.
    ...more
  • Hydraulically Actuated Diaphragm Pump

    Hydraulically Actuated Diaphragm Pump

    Get Price Quote

    • Country of OriginIndia
    • Number Of FlowerDiaphragm Pump
    • ActuationHydraulically
    • PackagingDepends On Manufacturer
    • Usage InChemical Processing
    • Introducing the Hydraulically Actuated Diaphragm Pump, proudly made in India. This high-quality diaphragm pump is hydraulically actuated, ensuring efficient and reliable performance. The packaging may vary depending on the manufacturer. Ideal for chemical processing applications, this pump is designed to meet your industrial needs with precision and durability.
    ...more
  • Reciprocating Pump

    Reciprocating Pump

    500,000 / Piece

    • Applicationindustrial
    • Brand NameLYNX
    • Flow Range445 LPM
    • Packaging TypeBox
    • Max Flow Rate445 LPM
    ...more
  • Regenerative Self Priming Pump

    Regenerative Self Priming Pump

    Get Price Quote

    We offer to our esteemed clients efficient Regenerative Self Priming Pump. Our Regenerative Pump is appreciated by customers for its compact design and dependable performance. Our pumps are available in various dimensions to suit different industrial requirements. That is why we are a celebrated Manufacturer, Supplier and Exporter of Regenerative Self Priming Pump from Ahmedabad, Gujarat.Details :  Capacity -Max. 130 L.P.M.  Head -Max. 80M.  Speed -1450 R.P.M (Normal) 1800 R.P.M. (Max.)  Temperature -Max. 60oC for Standard Pump Max. 100oC for Hot Water Pump 'H'  Suction Lift -Max. 8 M.  Rotation -Clockwise when looking from drive end.  Application :  Solvent Transfer  Transfer of Liquid with Air/Gas  Various Marine Applications  Refrigeration / Fuel oil  Industrial Water Supply  Material of Construction :  Suction Cover -CI FG260  Delivery Cover -CI FG 260  Intermediate Parts -CI FG 260  Impeller -H.T. Brass  Shaft -Stainless Steel  Shaft Sealing -Gland Packing / Mech. seal  Special Material also available  Constructional Features :Have Horizontal, Lateral Channel, and self-priming design for continuous operation handling clear liquid free from any suspended particle. Suction and Delivery branches are vertical and flanges are oval. Counter flanges are provided with BSP thread. Pumps are provided with one grease lubricated ball bearing and one bush bearing flushed by liquid handled. For special applications, mechanical seal can be fitted.  Tolerance on Capacity + 10% at rated head and rated R.P.M.  Capacity applies to liquid at barometric height of 760 mm mercury and at a temperature of 30oC  Power inputs indicated above are for specific gravity of 1.0 and viscosity of 1 cSt.  For hot water pump 'H', capacity is reduced.  For Suction lit of more than 4 M. Capacity is reduced.
    ...more
  • Self Priming Bare Pump

    Self Priming Bare Pump

    Get Price Quote

    We manufacture high quality Self Priming Bare Mud Pumps that are applied for the used for an extensive range of usage that deals with the supply of water. Our pumps offer excellent performance to the clients in a durable manner. Since they are procured from the best quality raw-materials from the trusted vendors of the market and are fabricated as per the designs of our experts. They are robust and are does not corrode or erode easily. They are made as per the norms of the industry utilizing the state-of-the-art technology. Hence they function reliably and offer swift automatic self priming action. They vibrate minimally and are noise free. They offer high energy efficiency hence is very cost-effective. They need minimal maintenance and can be installed easily. We test out the quality of our pumps to make sure we deliver faultless pumps to our clients. We offer them at market leading price rates. Specifications: HP 1.00 TO 25.00   Salient Features : Swift automatic self priming action Durable High and smooth performance Strong and sturdy Ideal for tough industrial environment Quality tested Reliable Minimal vibrations Non-noisy Easy installation and maintenance
    ...more
  • Duplex High Pressure Plunger Pump

    Duplex High Pressure Plunger Pump

    30,000 / unit

    • MaterialMS
    • Pressure50-100bar
    • Usage/ApplicationIndustrial
    • Max Flow Rate5-25LPM
    • BrandHydron Engineer
    ...more
  • TWO STAGE DRY VACCUM PUMP

    TWO STAGE DRY VACCUM PUMP

    Get Price Quote

    REAL’S Vacuum Pumps are the number one choice for demanding applications, providing top operating efficiency combined with low maintenance. And best of all, these vacuum pumps are backed by REAL AIR COMPRESSOR, the world’s leader in Air compressor and pump manufacturing.FeaturesSeparately cast cylinders with deep fins for improved cooling and efficiency100% cast iron frame and cylinders for durability and long lifeEasily accessible stainless steel valve and one piece connecting rod improves serviceability and reduces cost of maintenanceLow oil level switch standard on all packages to prevent compressor from potential damages due to low oil level..
    ...more
  • Dry Vacuum Pumps

    Dry Vacuum Pumps

    Get Price Quote

    Our buyers can get from us a high quality range of Single and Two Stage Dry Vacuum Pumps. Our dry vacuum pumps are specially designed and developed by our professional personnel, who guarantee that the offered pumps maintain its high efficiency.
    ...more
  • Diaphragm Pump

    Diaphragm Pump

    Get Price Quote

    • Driven TypeElectric
    • Power1-3kw
    • ApplicationIndustrial
    • Country of Origin220V
    • Number Of FlowerDiaphragm
    • Country of OriginIndia
    ...more
  • Pneumatic Calibration Pump

    Pneumatic Calibration Pump

    Get Price Quote

    Our Pneumatic Calibration Pump acts as a reliable pressure source. With the use of our Pneumatic Calibration Pump, pressure can be generated at a very low cost. It has facility for digital display of the measurement of the pressure generated. Our Pneumatic Calibration Pump consumes very low electricity and remains in use for a long time. These features make our Pneumatic Calibration Pump the first choice of the clients. Brand Name SIKA Attributes Long usable lifeVery high pressure can be generatedOffers excellent calibrationEasy to operate
    ...more
  • Polypropylene Pumps

    Polypropylene Pumps

    Get Price Quote

    “FLOWCHEM” Series PPPVDF pumps are “Centrifugal Process Pumps” in Back pull-out Construction Horizontal, Foot Mounted, Single Stage End suction and top Centerline Discharge these pumps are the most economical and efficient for pumping and Transfer Highly corrosive and aggressive liquids like acids, alkalis, effluent etc.Centrifugal Process pumps are offered with semi open impeller with `CARTIDGE’ Bearing Housing For the adjustments of impeller clearance for Prolong efficient working.
    ...more
  • Diaphragm Pump

    Diaphragm Pump

    20,000 / Piece

    • MOQ10 Piece
    • Max Flow RateUp to 1000 Kg/cm2
    • Country of Origin415 V
    • Pressure8 Kg/cm2
    • Power SourceElectric
    • Model Name/NumberPMD-X1/ PMD-X2/ PMD-X3
    • Usage/ApplicationChemical Dosing
    • Pump TypeDosing Pump
    • BrandPremix
    • MaterialMonel, Alloy 20, Hast alloy B, Polypropylene, Hast alloy C, Titanium, GFT
    • Motor Horsepower1.5HP
    • Head80m
    • PhaseThree Phase
    • Maximum Discharge Flow1000 LPH
    • TemperatureAtm.
    • Frequency50Hz
    ...more
  • GAS OPERATED METERING

    GAS OPERATED METERING

    Get Price Quote

    • Number Of FlowerSingle Acting Reciprocating Plunger Type
    • SeriesPDP Series
    • Capacity Range0.025 to 75 LPH max.
    • Max. Discharge PressureUpto 150 Kg/cm2
    • Material Of ConstructionSS 316
    • Capacity AdjustmentsMicrometer adjustment and speed relay timer
    • Temperature Range30° C to 100° C
    • Aceessories   • Dosing Tank in SS, CS• Complete skid mounted system with instrumentation, piping, valves, flow meters and accessories• Flameproof Electrical Heaters   Compact Skid Mounted Packaged Portable Chemical Dosing system with : Air / Natural Gas Operated Chemical Dosing Pump, 400 / 500 / 1000 Ltr CS / SS Tank with Level Gauge and Rockwool insulation Rigid Skid for rough handling. Inbuilt Calibration Pot. SS Interconnecting Piping with ball type isolation valve, suction strainer, ferrule fittings for leak proof operation. Pre tested at the maximum discharge pressure Pump, Calibration Pot and FRL mounted in a lockable enclosure for safety. Epoxy painted for corrosion resistance. Piping designed for use of thick viscous liquids during winters also. Optional – Tank Heaters with temperature sensor and controls (Flame Proof DGMS approved.) Optional – Pump Flow Rate measuring and monitoring device up to 200 barg to record, store and monitor Pump Flow Rate, Flow Totaliser, enabling user to calculate hourly and cumulative working of the pump derived by computing the total flow per unit time. Measuring and controlling device available in Flame Proof and Non Flame Proof construction / housing. PUMP FEATURES   Plunger Type in SS 316 construction. Intrinsically Safe operation Ceramic Plunger – optionally ceramic coated / hard faced Stainless Steel Flow Control by stroking rate with Stroke Delay Timer and stroke length variation with an accurate Micro Meter Stroke Adjustment device Flow turn down ratio of 100 : 1 ( by combination of stroke rate and stroke length adjustment ) Steady State Accuracy of ± 1.0 % or better. Simple operation, minimum working parts, field serviceable pumps. Pressure Amplification ratio 1 : 30 Max Pressure 150 Kg/cm2. Input Air / Gas Supply : 2 – 9 Kg/cm2 Field adjustable maximum pressure cut off by control of Input Air supply from Air Filter Regulator Assembly. Supplied with inbuilt Filter Regulator Assembly and Flow Calibration / Flow Rate Pot  STANDARD ACCESSORIES ALONG WITH PUMP   Inlet Air / Gas Filter & Pressure Regulator. Calibration Pot. Interconnecting Piping. All built in to a cabinet. OPTIONAL ACCESSORIES Dosing Tank in CS, SS construction. Tank and piping with or without Insulation. Complete skid mounted chemical dosing / injection skid with instrumentation, piping, valves, strainers, flow meters, flow rate totalizer’s and accessories. Flameproof Tank Electrical Heaters Flow rate measuring and monitoring device. (Available in Flameproof and Non Flameproof construction/ enclosure)
    ...more
  • Polypropylene Pump

    Polypropylene Pump

    Get Price Quote

    • MaterialPolypropylene
    • ApplicationWater Use
    • PressureHigh Pressure
    •  Melting Point208 (98) Deg F (deg C)
    • SurfacePolished
    • Warranty1 year
    ...more
  • Special Custom Built Pumps

    Special Custom Built Pumps

    Get Price Quote

    • Power100-500W
    • Country of OriginIndia
    • ApplicationIndustrial
    • PressureHigh Pressure
    • Power SourceElectric
    • Motor Horsepower2 - 15 HP
    • Special Custom-Built Pumps & Accessories Available With Pump Manufacturer We are Leading Manufacturer of Custom Built Pump, and Special Custom Built Pump in India Special Custom-Built Pumps & Accessories Available With Pump Product Overview We are Leading Manufacturer of Custom Built Pump, and Special Custom Built Pump in India
    ...more
    www
  • Chemical Dosing Pump

    Chemical Dosing Pump

    Get Price Quote

    • Number Of FlowerChemical Dosing Pumps
    • ApplicationChemical Supply
    • Asha Technocrats – Manufacturer of Chemical Dosing Pump, Chemical Metering Pump, EMEC & Water Powered Chemical Dosing Pump, Chemical Dosing Pump Controller, Electromagnetic, Compressed Air Driven Dosing Pump, Ahmedabad, Gujarat, India.
    ...more
  • Gear Pump

    Gear Pump

    Get Price Quote

    • Number Of FlowerGear Pump
    • ApplicationIndustrial
    • Availability0-25kg, 25-50kg, 50-100kg
    • Frequency50Hz, 60Hz
    • Driven TypeElectrical, Hydraulic, Mechanical
    • Pressure0-5Bar, 15-20Bar, 5-10Bar
    • Motor Power10 HP, 1HP, 2 HP, 5 HP
    • PhaseDouble Phase, Single Phase, Triple Phase
    • Pump Speed1440Rpm, 1800Rpm, 2900Rpm
    • Flow Rating0-3000 LPH, 3000-6000 LPH
    • We are the main supplier of this product.
  • Plastic Impeller Water Pump

    Plastic Impeller Water Pump

    Get Price Quote

    • 193 mm
    • 298 mm NIMCO
    • 3100 mm GANGA TYPE
    • 493 mm GOLD MARUTI
    • 5100 mm GOLD MARUTI
    • 6100 mm GANESH TYPE [WHITE](With Nut)
    • 7100 mm GANESH TYPE [BLACK](With Nut)
    • 8100 mm GANESH TYPE [WHITE](Without Nut)
    • 9100 mm GANESH TYPE [BLACK](Without Nut)
    • 10100 mm SILVER TYPE
    • 11113 mm LUBI TYPE (With Nut)
    • 12100 mm HITESH TYPE
    • 13100 mm TULLU TYPE
    • 14120 mm TEXMO TYPE
    • 15135 mm TEXMO TYPE
    • 16150 mm (With Nut)
    • 17150 mm ( Two-Parts)
    • 18100 mm Nimco
    ...more
  • Vertical Glandless Pump

    Vertical Glandless Pump

    Get Price Quote

    • FeaturesNo mechanical seal, stuffing box and internal bearings provided.
    • We bring forth wide-range of Vertical Glandless Pumps, which has a finest performance, reliable, corrosion resistance. Our company is widely recognized in the industry for our suitable supplies of the quantities. It is always been installed in the vertical position.Bhagwati Engineering is manufacturer of Vertical Glandless Pumps in India. The design of Vertical Glandless Pump is such that the requirement for any form of motorized seal or chock-a-block gland is eradicated by allocating a controlled leakage of the liquid that is being pumped to return to the suction tank by the route of an overflow connection in the upper body of the vertical glandless pump.
    ...more
  • Motorized Pressure Test Pump

    Motorized Pressure Test Pump

    Get Price Quote

    We are an eminent Pressure Test Pump Manufacturer and supplier, originated in India. Our stout motorized pressure test pump is available in custom-built models. We proffer matchless motorized pressure test pump that is available at economic price. Motorized Hydraulic Test Pump has replaced the conventional method of hydro testing by hand-operated pumps, thereby saving a lot of precious time & manpower. Consultancy / Inspecting personals do not wish to spare lot of time for hydro testing of equipments when large quantities are involved. We offer "Hi-Test -HFF Series" HYDRO TEST PUMP, which is more efficient & accurate, compared to conventional hand pump. They are also easy to operate & do not require skilled operator. Features of Our Motorised Hydro test Pump Totally EnclosedOil bath lubrication to ensure trouble free operationEasy to maintainRugged standard designPressure Testing equipments of small to large size can be tested with wide range of pressure i.e. up to 700 Kg/ cm2Available as portable package, for shifting at sites. (Application such as large pipeline testing, equipments installed at different places.)Low cost Application Hydrostatic pressure testing of pressure vessels,casting, tubes & valves. Boiler feedCirculating water under pressureHigh altitude pumpingGas Cylinder testing for high pressureLPG, nitrogen, oxygen cylinder testingWe provide pressure up to 750 kg/cm2 HI-TEST HFF 25 Series Motorised Hydraulic Test Pump HI-TEST HFF 25 Series Motorised Hydraulic Test Pump are backed by 30 years of extensive experience. These pumps have been designed to meet various industrial needs for accurate Hydrostatic Pressure Testing.
    ...more
  • Suntec Fuel Pump

    Suntec Fuel Pump

    2,250 / Piece

    • Fuel TypeDiesel
    • Max Flow Rate47LPH
    • Voltage220/240 V
    • Automation GradeManual
    • Usage/ApplicationDIESEL BURNER
    • BrandSUNTEC 
    • Model Name/NumberAS47 A/C
    ...more
  • Vacuum Pumps - Single / Two Stage Dry Vacuum Pumps

    Vacuum Pumps - Single / Two Stage Dry Vacuum Pumps

    Get Price Quote

    Single or Two Stage Dry vacuum Pumps are single acting, air cooled units in single and / or two stage construction. It is positive displacement piston type pumps which achieve vacuum upto 29.0" Hg for single stage and upto 29.6" Hg for two stage construction, at sea level. These dry type Vacuum Pumps are useful in Paper handling, liquid transfer, vacuum forming food processing, Hospital and many other applications.
    ...more
  • Polypropylene Pump

    Polypropylene Pump

    Get Price Quote

    • ApplicationAcid, HCL, Gases-CI2, Br, I, So2 and etc…
    • Maximum Capacity50m3/Hr.
    • Head35 Mtr.
    • TemperatureAmbient
    • M.O.CMolded Polypropylene
    • Sealing TypeMechanical Seal Fitted.
    • Impeller TypeSemi Open
    • We are a prime supplier of Agitator Seals around the world. We manufacture standard size Agitator Seals along with custom made Agitator Seals as per customers preferred specifications. Our wide range of Agitator Seals is exported to different countries for usage in industries. We are an Agitator Seals Manufacturer with high industry demand. We are the main Agitator Seals Suppliers for the pharmaceutical, food and beverage industry around the globe. In pharmaceutical and food industry there stands a huge chance of contamination of products during the agitation process that is conducted inside the Agitator Seals. Such contamination occurred can easily affect the quality of the products, or it may turn the product unusable. We are an Agitator Seals Supplier, whose manufactured Agitator Seals do not require any lubricating agent for lubrication of the faces. The demand for our Single Seal and Double Seal Agitator Seals is growing day by day making the largest Agitator Seals supplier in the world. Agitator Seals produced us has a wide variety of usage in different industries – that include – vessels, glass line vessels, blowers and reactors.   Our manufactures Agitator Seals are mainly used in the best in class Industrial Agitators. Sturdy construction Corrosion resistant Consists hardness Dimensionally accurate Temperature resistant Abrasion resistant Leakage proof.   Along with the manufacture, we also are the best Polypropylene Pump Suppliers offering a huge quality range of this pump such that the pumps are made available in various models so as to meet the varied requirements of different industries accordingly. The products are well designed and properly fabricated so as to resist the corrosive chemicals like alkalies, acids and solvents too. The pump is available in semi open impeller as well as acid corrosion mechanical seal. The pump is very simple to install and as easy to operate. One does not required any special training for people to use these kinds of pumps. On the technical side, the maximum capacity of such pumps is 50m3/hour with a head of 35 Mtr. The temperature is ambient and the M.O.C in which it is available is Molded Propylene. The sealing type is Mechanical Seal Fitting and the impeller type is semi open. Owing to our customer friendly approach and the accomplishment of customer requirements within the specified time frame, we are also recognised worldwide and are the Polypropylene Pump suppliers. The sophisticated facilities available in our company enable us to meet the demands of our huge customer base spread across the globe and the demands are ever-growing. The professionals of our company work in coordination to meet the demands of our clients and increase the customer satisfaction. Not only do we provide with best quality products but we also provide the clients with excellent after sales service so as to make sure that the pumps work efficiently throughout. The Polypropylene Pump finds its application in various fields like food industries, Dyes and Chemical Industries, Textile Processing Plant, Oil and other fuels, Pharmaceuticals Industries, Effluent Treatment Plant, Petro-Chemical Industries, Dairy Industries, Fertilizer Industries and the list just goes on. At Active Seals we provide with products that leave you hassle free with high rate of performance.   Application : Used in continuous processing acid pickling line in steel industries. For filteration and pressurise feeding in dyes and intermediate industries. Excellant for vacuum ejectors. Scrubbing of corrosive gases like Cl2 Br, I. So2 For descaling of tubes   These pumps are high head (up to 35 mtrs.) with different capacity coupled to 2900 rpm motors.
    ...more
Filter by Locality
top