Cable Tester Dealers

Bestnet carries a line of Network LAN tester provide you with an economical way to test Cables & Networks. These Ethernet Testers are specially designed to test the full range of the ever-expanding Ethernet, Lan Data and cable configurations. These ethernet Lan Testers is a must for anyone in the cabling industry.    Functions : » Can test correspondingly double-twisted cables1, 2, 3, 4, 5, 6, 7, 8 and G, meanwhile, can judge wrong connection, short circuit and open circuit. NS-468B tests BNC, RJH and RJ45; NS-468 tests RJ11 and RJ45; NS-468N tests RJ45 and BNC; ST-248 tests RJ45 and BNC      Test of double-twisted cables : » Switch on the power. (S is slow automatic grade, M is manual.) Put cables into both main tester and remote tester. The lights of the main tester will turn on sequentially from 1 to G.      Main Tester : » 1-2-3-4-5-6-7-8-G       Remote Tester : » 1-2-3-4-5-6-7-8-G RJ45 » 1-2-3-4-5-6-------- RJ12 » -2-3-4-5------------ RJ11      Following are erroneous connections : » If one cable, for example, cable No. 3 is open circuited, the two No. 3 lights of the main tester and remote tester will not turn on. » If several cables are not connected, several lights will not turn on respectively. If less than two cables are connected, none of the lights is on. » If two ends of the cable is disordered, for example No. 2 and No. 4, then displays on:Main Tester : 1-2-3-4-5-6-7-8-GRemote Tester : 1-2-3-4-5-6-7-8-G » If two cables are short circuited neither of the corresponding lights is on of the remote tester while main tester remains unchanged. If three cables, including three, are short circuited, none of the corresponding lights is on.   If test patch panels or wall plate outlets, two cables which can match each other (eg 110P4 and RJ45) will be connected to the tester. If test cables of the same axes, BNC turns on when the cable works.    

The Presto Melt Flow Index Tester - NXG Model is a reliable instrument used for evaluating and analyzing the flow properties of molten plastics or resins. The determination of the melt flow index of plastic materials is an important parameter in the evaluation of its quality.

Transmitter & receiver Included. To identify & trace up to 16 cables.It can also be connected to heat and water supplying 　installation system. Digital display on the receiver indicates the relative cable.

Cable Insulation Tester is similar to ELD with the most important difference that this monitors the signaling cables in un-energized mode. Insulation Resistance value ranging from 500 KO to 100 MO. It has a special feature, in case a pair is energized the instrument automatically stops functioning.

High Voltage Tester HVT-7050 perform DC high-voltage testing of power cables (IEC 60502-2) up to 70 kV, power cables accessories (IEC 61442) as well as AC high-voltage testing, up to 50 kV at 50 Hz, of switchgear, reclosers, dielectric insulators, highvoltage dischargers (arresters), busbars and other dielectric materials with relatively low electric capacitance.

We are the well-known Importer and Supplier of Test Equipment. We source these Test Equipment from industry̢۪s trusted manufacturers. Our state of the art Test Equipment are in compliance of stringent quality norms, thus in huge demand worldwide. These Test Equipment are exclusively made for precision measuring and obtaining accurate results.

The base unit of the cable tester can be connected via a network cable directly to a hub or switch to test wire connections, or to a network card to test the send receive pairs of wires, it can test if there is any open or miss-wire without the remote kit. 9 Led's to show you exactly which wire is open or miss-wire on both remote and master unit. Network Cable Tester can judge wrong connection, short circuit adm open circuit Build in power switch for power saving RJ45 Network Cable Tester test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8 and Ground 9 LED lights to indicate wiring connection on both remote and master unit Auto scanning function for rapid testing

Whether you have a few or a mountain of cables, it pays to know which ones are good and which ones need to be tossed into the not so good pile. The MTEST-1 is an incredibly handy tool that can out the cables that may have seen too much action.

Brand Name:-SAMTEKLAB Cable tester Use of Cable tester Cable Tester capable of identifying Up-to 16 Lines. Supplied With transmitted,Recever and Batteries of 9v. Accuracy is Minimum1%. DC Voltage Check On line Between 5 & 16V.           

Find The Cable Fault By A Single Machine The machine will save you through the cable faults. It's seen that the cables are damaged due to heavy loads and unpleasant weather situations. The product does justice to these times. The service seeker should be your end goal if you want to benefit in organisation and that’s the reason the top High Voltage Cable Tester Suppliers In India have designed the product. You can take this shockproof device in a harsh climate and it will give you a smooth repair. You will know about the live wire, its failure reason, live voltage detection, and further   Voltage Detection Levels For An Accurate Testing The High Voltage DC Tester will serve you know the five intensity detection levels that can range from 3 kV to 33 kV. When you have this type of voltage detection level, you have more freedom to test the cable’s fault to the right extent. Being a repairman, you need to find the issues of the data cable or electrical cable that lead the electricity to the end-user. The testing will benefit you and get you high profit in your company and will stimulate you to make the new cables for the business to business and business to consumer segments. Try the High Voltage Cable Tester Manufacturers In India products now!.