Ankit Scientific Industries Punjabi Mohalla, Ambala, Haryana

Two metal frames are connected by a pivoted link which also carries a spirit level. A micrometer head reading to 0.01 mm is provided to re-adjust the spirit level. With two self-centering wire pin chucks, a ceiling bracket also with two pin chucks, a counterpoise weight & supply of suitable wires but without slotted masses.

For use with electronic machine or induction coil, with vacuum regulating device. Comprises a glass sphere with a concave disc electrode generating cathode rays and focusing on a tungsten target, placed at an angle of 45 degrees at the inner end of arm exactly opposite. These tubes produced soft X-Rays and care must be taken from over exposure.

An alloy of manganese, nickel and copper, having a low temperature coefficient. This wire is particularly suited to construction of resistance coils etc., or any application where accuracy of ohmic value is the important factor and electrical loading is low.

Stand overall height 43 cm. for use in vertical or horizontal position, fitted with handwheel and wire helix belt drive to pully. Suitable for use with Savart wheel and disc and adopter to accommodate colour discs.

The two plates are supported in two rigid uprights and driven by belt in opposite direction. They are heavy, high resistance plastic with sectors of aluminium sheet. Two leyden jars (condensers) made from corning glass and aluminium foil. The whole is mounted on a wooden base nicely polished. ALSO AVAILABLE MOUNTED ON TRANSPARENT ACRYLIC BASE.

Size 680 x 1080 x 980mm. approx., padded seat & back, adjustable foot rest, fixed arm rest, rear tyres with brakes and front castors of 12cm, epoxy finish.

Wooden double wheel with flat bottomed grooves, 150 and 50 mm diams. respectively with a spindle for supporting in a retort stand, with two hooks and cord. Supplied without stand or masses.

A very effective and motivating learning aid in elementary electromagnetism. Consists of 8 anisotropic alloy magnets, 8 ceramic ferrite magnets, 4 steel magnet yokes, 6 plotting compasses, 4 hardboard formers to take compasses, 1 bottle iron filings 250 gm, 4 dispensers for iron filings ,4 double C-cores, 4 clips for C-cores,4 aluminium rings,4 aluminium split rings,4 armatures with axle tubes,4 aluminium axle rods, 8 split pins, 16 rivets, 4 formers for coils, 4 reels cellotape,4 reels copper wire, 4 sheets white pasteboard,4 plain postcards,4 reels white cotton thread, 1 length latex rubber tubing, 4 each resistors 100 ohms and 10 ohms,4 support bases,10 m.e.s.bulbs, 8 mes bulb holders,1 wood clamp, 1 wooden block, with instructions.

Chrome plated brass weights, in polished velvet lined wooden case, with hinged lid. Divided compartments with dust proof cover holds nickel-silver and aluminium fractions. With chrome plated brass forceps. Accuracy plus-minus 5mg.

Made of Borosilicate Glass. Ideal for weighing small quantities of powder. Easy to use with hollow stem to aid introduction of the powder into narrow neck vessels e.g. volumetric flasks The flat base ensures stability on the balance pan.

A weather vane made of sturdy plastic or metal. The large arrow is free to rotate and will come to rest pointing to the wind direction. It can be held or fixed to a post. Height : 30cm (minimum) One set is composed of 2 pcs.

For demonstrating the movement of progressive transverse waves. Comprises 22 small balls on wire rods, with eccentric motion attachment, with driving handle and fitted on polished wooden base.

Casted aluminium, electrically operated wall mounting, body and condenser jointless. Specially meant for pyrogen free distilled water. Fitted with automatic ejection heater. Condenser and baffle cups are made of stainless steel.

WATER BATH RECTANGULAR DOUBLE WALL DOUBLE Walled, Outer body made of MILD STEEL duly painted or Stainless steel Inner body (working chamber) Lid and concentric Rings made of Stainless Steel. Fitted with immersion heater to work on 220 Volts A.C. WIDTH X DEPTH X HEIGHT (a) 300MM X 250MM X 100 MM (6 HOLES OF 75MM DIA). (b) 455MM X 355MM X 100 MM (9 HOLES OF 75MM DIA). (c) 425MM X 325 MM X 100 MM (12 HOLES OF 75MM DIA)

Plated steel, columbus type calliper enabling the user to read either inside, outside or depth measurements. With dual scale 0-12 cm x 0.1 mm. Imperial scale graduated to 5 x 1/128 inches provided with thumb wheel for easy motion of jaws, in plastic/velvet case.

The charge is transferred from generator to the metallic dome, surrounding the upper pulley, with the help of the motor driven rubber belt and two metallic combs. To reach high voltages, the lower portion of the sphere is smoothly inturned. The machine is fitted on base and other insulating parts are made of perspex, metal dome and the discharge sphere are polished. Accessory Set Head of Hair, brush of artificial hair may be fixed in 4 mm socket in top of upper dome of generator - Faraday pail-Neon Bulb-vibrating column to stimulate ions in motion in transparent plastic container and one spare belt.

Measurement of AC & DC voltages from 1.5 to 1500 Volts FSD in 7 ranges. Input impedance 10 Mohm for DC, 1 Mohm for AC at low frequecies. Frequency response : 10 Hz to 500 KHz. Accuracy for AC/DC voltages : ± 3 % of range. Measurement of Resistance from 0.2 Ohm to 1000 Mohm in 7 decade steps with ohm to 10 Mohm centre scale. Accuracy for resistance range : ± 5% of center scale upto 1 Mohm.

The Rotary oil Sealed pumps are quite operating and vibration less manufactured on advance technology duly tested 220 VOLTS A.C to assure satisfactory performance motor and drives pump is completely on Rectangular Heavy steel base plate are furnished. V. Belt is covered with Steel cover for safety measures and connected with pump and motor pulley. Vacuum pump are supplied with Vacuum Oil ( without Vacuum Gauge, Moisture trap. MCLOAD gauge , and non return valve etc.) Vacuum pumps are available from 25 litre cap to 200 litre cap. with :- (a) Vacuum Gauge with Regulator dial type (b) Moisture trap fitted with Vacuum Gauge and Regulator (c) Mclaod Guage with Mercury (d) Non Return Valve with dial guage and regulator (e) Non Return Valve

Vacuum Pump single stage oil sealed, Air cooled V belt driven and mounted on base plate with belt guard etc. S.No. Displacement in Lt./Min. Motor H.P. AC Single Phase 01 35 0.25 02 50 0.25 03 75 0.50 04 100 1.00 (b) Vacuum Pump Double stage specification as above Model S. No. Displacement in Lt./Min. Motor H.P. AC Single Phase 01 32 0.25 02 50 0.25 03 75 0.50 04 100 1.00 Accessories for above models (c) Vacuum gauge with regulator and non return valve. (d) Moisture Trap with non return valve and vacuum gauge with regulator. (e) Vacustat with mercury Range 10mm to 0.001 mm/Hg. Pressure. (f) V-Belt

Used for V.D.R.L. Test Blood grouping tests and also agglutination Test etc for mixing of solution. The Rotation platform size 300 mm x 300mm for accommodate blood bottle or flask using by spring holder. Unit having Fixed speed / variable approx: 130 RPM supplied ON/OFF switch , indicator light to work on 220 Volts A.C

 Instrument comprises of Two DC Regulated Power supplies 0-15VDC/ 150mA & 0-25VDC/150mA, three round meters for voltage & current measurement, one UJT 2N2646 mounted behind the panel, connections of Supplies, Meters & UJT brought out at 4mm Sockets.

ALINCO, with keepers. Dimensions are nominal. Supplied in card board boxes.  

Cut, Copy, and Paste. Selected copy by free hand AOL controlled by four arrow keys available on keyboard or mouse with zoom preview. Crop, duplicate, restore Resize Compression Conversion to other format BMP, JPG, TIF, PNG, GIF & PSD Flood fill or spray with selected color at selected portion. Grid creation; 5X5, 10X10 & 100X100 lines. Drawing tool curve, line, square, and circle with node control and provision to change color & thickness of the line Write text in any color or font. Pointer to place on an object in four directions with provision to change its color & thickness. Eraser works only on line, arrow or on any drawing tool.(not on original image) Camera Lucida Montage feature to merge stored image together. Useful to Merge different focuses of same image. Image stitching. Highlighter. Pixel by Pixel Correction by key board. Multiple image folder with Search facility. Filter application on selected area.