CNC Lathe Machine Dealers in Delhi

(68 products available)
  • Premium
    Industrial CNC Lathe Machine

    Industrial CNC Lathe Machine

    1,525,000 / Piece

    • MOQ1 Piece
    • Brand NameGNP
    • Usage/ApplicationIndustrial
    • Driven TypeElectric
    • Model NumberART 300
    • Maximum Turning Diameter150 mm
    • Maximum Turning Length300 mm
    • Spindle SizeA25
    • Spindle Motor Power Fanuc Continuous5.5 Kw
    ...more
    www
  • Mini CNC Lathe

    Mini CNC Lathe

    Get Price Quote

    • Voltage Rating220V
    • Maximum turning diameter250mm
    • Maximum workpiece length550mm
    • This machine is suitable for small mechanical processing, Repair match means. Desktop Lathe machine STANDARD ACCESSORIES: Three-jaw chuck, Wrench kit, Common screw, General Top
    ...more
  • CNC Underfloor Wheel Lathe

    CNC Underfloor Wheel Lathe

    Get Price Quote

    • Max. Main Drive Motor Capacity4 x 15 KW
    • Cutting Speed while Profiling25 to 80 m/min
    • Tool Post Feed for Wheel Profiling0.1 to 2.5 mm/rev
    • Tool Post Rapid Speed for Both Axes3000 mm/min
    • Max. Chip Cross Section while Profiling10 mm2
    • NC Under Floor Wheel lathe is an automatic machine for simultaneous profiling of new or worn out wheels of railways vehicles in situ. Wheel sets of railways rolling stock i.e. locomotive, coaches, wagons etc. are turned on this machine when in assembled condition. It is equipped with dual CNC tool post for turning any wheel profile along with pre and post measurement system.  Model : YUL -08   Pl. note that improvements is a continuous process. Hence, details explained above may undergo some changes meeting functional, quality and productivity requirements of the required technical specification.
    ...more
  • Premium
    Siemens CNC Lathe System (VPL-CNC-28 SIEMENS)

    Siemens CNC Lathe System (VPL-CNC-28 SIEMENS)

    Get Price Quote

    • Turning Φ via lathe bedΦ260mm
    • Distance Between Centers600mm
    • Spindle boreΦ26mm
    • Spindle taperMT4
    • Spindle speeds30-4000rpm
    • Tailstock taperMT4
    • Pitch-metric0.2 – 3.5mm
    • Pitch-inch8-56TPI
    • X travel130mm
    • Z travel465 mm
    • X rapid speed3000mm/min
    • Z rapid speed2500mm/min
    • X positioning accuracy0.03
    • Z positioning accuracy0.032
    • X repeatability positioning accuracy0.012
    • Z repeatability positioning accuracy0.013
    • Motor power2.2KW 230V
    • Packing size2220x820x1720mm
    ...more
    www
  • Premium
    CNC Vertical Lathe

    CNC Vertical Lathe

    Get Price Quote

    • Machine TypeCNC Vertical Lathe
    • Machine MakeWebster Bennett
    • Machine Model72 Inch
    • FeaturesHighquality, Easy operation, Minimum Maintenance
  • Servo Drive CNC Lathe Trainer

    Servo Drive CNC Lathe Trainer

    Get Price Quote

    Servo drive CNC lathe trainer has a sturdy body along with high precision and flexible circuit boards. We have hired proficient quality analysts having rich domain experience who make sure that only defect-free range will be delivered to buyers. We are a flexible company. We support our clients wholeheartedly and provide them with the option to make payment online or offline. We are comfortable with diverse payment methods.
    ...more
  • Turret CNC Turning Lathe Machine +3

    Turret CNC Turning Lathe Machine

    Get Price Quote

    Turret CNC Turning Lathe Machine is perfect for center to center turning with 4 tools. We are reckoned as one of the reputed Manufacturers and Suppliers of CNC Turning Lathe Machine from Delhi, India. It is made available with box guides for heavy machining. Servo motor driven spindle, Hydraulic chuck & tailstock are provided with CNC Turning Lathe Machine for rigid clamping. The machine can be obtained from us at the best market price.
    ...more
  • CNC Trainer Lathe

    CNC Trainer Lathe

    Get Price Quote

    • Brand NameEMCO
    • Number Of FlowerTURNING CENTER
    • EXCELLENTBEST
    • Lead Timemay 2010 end
    • CNC or NotCNC
    • Portludhiana
    • Year1998
    • Place of OriginPunjab, India
    • We are main supplier of this product.
  • CNC Lathe Machine

    CNC Lathe Machine

    Get Price Quote

    We are engaged in manufacturing, exporting and supplying precision-engineered CNC Lathe Machine. Designed at our contemporary fabrication unit, the CNC Lathe Machines are quality tested and approved by the authorities. The CNC Lathe Machines, that we offer, are suitable for lath as well as mass production. They are highly efficient, durable and affordable. Owing to their user-friendly ergonomics, the CNC Lathe Machines ensure easy operation. They demand low maintenance.
    ...more
  • CNC Trainer Lathe

    CNC Trainer Lathe

    Get Price Quote

    Our range of CNC Trainer Lathe Machine is manufactured from quality-tested raw material.These lathes can satisfy the various turning requirements of a very wide range of different Industries offering an affordable solution to higher machining accuracy and better surface finish. We also meet customized requirement for our clients benefit.
    ...more
  • CNC Vertical Turning Lathe

    CNC Vertical Turning Lathe

    410,000 / piece

    • MOQ1 piece
    • Total Carbohydrate2 Year
    • Brand NameJAEWOO
    • Driven TypeElectric
    • Surface Finishingstandard
    • Job MaterialMetal
    • ShapeRound
    • Power10-50 KW
    • Operating TypeCNC
    • SpecialityEasy To Use, High Efficiency, Reliable, Robust Construction
    • Country of OriginIndian
    • TypeVertical
    • high productivity.All system avvailable2 Years warrenty.
  • CNC Lathe +1

    CNC Lathe

    Get Price Quote

    • MOQ100 Milliliter
    • Number Of FlowerCnc Lathe Machine, Cnc Lathe
    • ApplicationFacing, Turning
    • Availability100-1000kg
    • A CNC lathe is a machine that rotates a workpiece on a spindle to cut materials by using cutting tools and drill bits with different diameters. CNC Lathes are capable of producing a Clyndrical variety of shapes, cuts, and details on a rotating work part. On a CNC lathe , an engineer can program the machine to make difficult machining cuts on tough materials and produce quality pieces at a high and prrecision rate.  Basically, A cnc lathe is a machine tool that rotates a workpiece about an axis of rotation to perform various operations such as cutting, threading, knurling, drilling, deformation, facing, and turning.
    ...more
  • CNC Lathe Trainer Machine

    CNC Lathe Trainer Machine

    Get Price Quote

    We manufacture, export and supply CNC Lathe Trainer Machine, which can be used for teaching the dual using of machinery and can determine the fault of the current. Our CNC Lathe Trainer Machine comes equipped with latest machinery. It comes at low cost and is made up of quality components and material that is used to build a durable and reliable machine. Specifications In the CNC Lathe Trainer Machine, the CNC lathe controlled by a PC and driven by step motor (or servo motor)It is suitable for turning cylindrical and taper faces, boring, grooving and cutting Features Of Our CNC Lathe Trainer Machine Functions of Automatic diagnosis and program power cut off protectionLongitudinal and cross feeds are effected by ball lead screws driven by step motorHigh SpeedEfficiencyStable performance
    ...more
  • WREN Flat Bed CNC Lathe Machine Model ST-660*1000

    WREN Flat Bed CNC Lathe Machine Model ST-660*1000

    1,650,000 / piece

    • MOQ1 piece
    • Brand NameWREN
    • Driven TypeCNC
    • SpecialityEasy To Use
    • UsageINDUSRIAL
    • CertificationCE Certified
    • Machine TypeHorizontal Turning Centre
    • Packaging TypeWooden Box
    • Frequency3500KG
    • Country of OriginIndia
    • Spindle Speed25-1600(three gears)
    • Machine StructureHorizontal
    • Swing Over Bed660 mm
    • Spindle Motor Power11Kw
    • Distance Between Centers1000 mm
    • Max Spindle Speed25-1600(three gears) rpm
    • Machining Axis3-Axis
    • WREN Flat Bed CNC Lathe Machine Model ST-660*1000 with Manual Chuck 300Ø,Variable Speed Spindle Motor AC 11Kw,X & Y Axis Servo Motors, Siemens 808D CNC System with Manual Tail Stock, 4 Station Indexing Turrent, Spindle Nose A2-8Technical Specification1. Max swing over bed: 660 mm2. Max swing diameter over cross slide: 400 mm3. Distance between centers: 1000 mm4. Bed width: 480 mm5. X axis travel: 400 mm6. Z axis travel: 1000 mm7. Spindle speed: 25-1600(three gears) rpm8. Spindle nose: A2-89. Spindle hole: 9010. Number of stations: electrical indexing 4 stations11. Tool shank size: 25x25 mm12. X axis auto feed speed: 4000 mm/min13. Z axis auto feed speed: 6000 mm/min14. Quill diameter: 75mm15. Quill travel: 120mm16. Tail Stock Taper: MT6#17. Main Motor Power: 7.5 Kw18. Net weight: 3500 Kg19. Taiwan argo make chuck: 380 mmStd Accessories Supplied with1. Manual Chuck 300 mm dia2. Variable Speed Spindle Motor AC 11 Kw3. X & Y Axis Servo Motors4. Siemens 808D CNC system5. Manual Tail Stock6. 4 Station Indexing Turret7. Spindle Nose A2-88. Machine Lamp9. Coolant Pump with fittingsOpt Accessories1. Hollow Hydraulic Chuck (Rs 185000)2. Siemens 808D Advance CNC System (Rs 175000) 
    ...more
  • CNC Lathe Trainer

    CNC Lathe Trainer

    Get Price Quote

    • Swing over bed200mm (7.9”)
    • 200mm (7.9”)100mm (4”)
    • Center distance460mm (14”)
    • Bed width100mm (4”)
    • Spindle speed100-3000 rpm
    • Model EX-4 is an advanced Lathe Machine equipped with powerful 500 W brushless motor and one shot lubrication pump facility. With faster x/z moving speed of 2m/min and feeding speed of 500mm/min, this machine is able to save both time and electricity and increases overall efficiency. EX-4 is most accurate CNC Lathe Machine available in the market with position precision of 0.015mm and repeat position precision of 0.01mm.
    ...more
  • CNC Lathe

    CNC Lathe

    Get Price Quote

    • MOQ1 Set(s)
    • TypeLinear tooling
    • LM guidesHydraulic chuck clamping
    • Machine Features :- -LM guides for higher speed & precision -Linear tooling facilitates less cycle time -Telescopic bed covers -Servo Motors on both axis -Taiwanese & Japanese ball screw and bearings. Specification : HCL 300 General Capacity Max.swing diam. over bed :- 350 mm Max.swing diam. over slide :- 160 mm Max.diam.of through-hole :- 34 mm Chuck size :- 6" (inches) Spindle speed :- 300-3400 RPM Main motor power :- 5.5 Kw Type of tooling :- Gang type tooling XZ rapid :- 1218 Mmin
    ...more
  • Flat Bed CNC Lathe

    Flat Bed CNC Lathe

    Get Price Quote

    Specifications ItemsTechnology specificationsUnitCX3640 CNC LatheFlat BedCapacityMax. Swing Dia. Over Bedmmφ 320Max. Swing Dia. Over Slide mmφ 80Max. Through swing Dia. Of Barmmφ 20/30/38Max. machining length mm230Threat range: Metric/inchmm/TPI0.25-100/100-4SpindleFrequency conversionr/min50-5000 / 50-3000 / 50-2000Spindle Boremmφ 26/38/48Taper of spindleo45oTube Boremmφ 26/38/48Power of spindle motorkwFrequency conversion (3Ph 3 Kw), 3.7kw inveClamping Device-Std: Pneumatic spring Collet. Opt: Manual, Pneumatic Hydraulic Chuck.X/Z AxesTravel of X/Z AxesMm280 / 200Feeding speed of X/Z Axesm/min10-15Power of X/Z Axes feeding motornm4 AC Servo motorMin. setting unit of X/Z AxesMm0.001Tool TurretType of tool post-Std : Gang tool Carriage Opt : 4,6,8 Station Electronic Tool TurretNo. of tools PC1 - 8 (gang tool carriage) / (4,6,8 station electronic tool turret)Size of tool shankMm16x16 or 20x20OtherLubrication oil pump-Provided Power of coolant pump motor W90Overall dimensionMm1550(L)*960(W)*148Net weightkg900CNC System-GSK, Siemens, Fanuc Note : Designs are constantly changing and we reserve the right to modify these specifications without any notice.
    ...more
  • CNC Lathe Machine

    CNC Lathe Machine

    Get Price Quote

    CNC Lathe Machine GSK928TC/2 Step drive Manual Sprincollet(colletchuck),Platoon type knife rest, Orem frequency converters,Special frequency motor 2KW,encoder(with thread) with water pump, NSK baring, half protection. A renowned company across the various countries in the field of supplying various types of cnc,lathe & milling machinery and biggest seller of spare parts we have noticeable presence of our machinery and spare parts in turkey,india,pakistan, bangladesh, south africa, egypt, syria, morocco, iran, vietnam, thailand,srilanka, italy, poland, peru and other countries. Now we are come up with our own office in india under our brand name wenli international. We are well equipped with our sales and service network and we assures all our customers and those who are planning, an unmatched services.
    ...more
  • CNC Trainer Lathe

    CNC Trainer Lathe

    Get Price Quote

    • Weight (n.w/g.w)420/490 Kg.
    • Main motor power1000W
    • Powerful brushless motor, Powerful brushless motor, Additional power socket for computer, Work light installed Machine controlled by Mach3 system. High speed, efficiency and stable performance. Automatic diagnosis and program of power cut-off protection. Longitudinal and cross feeds are effected by ball leadscrews driven by mixed type step motor. 4-way tool post.
    ...more
  • CNC Lathe Turret

    CNC Lathe Turret

    Get Price Quote

    • Number Of FlowerTurret Lathe
    • ApplicationCutting
    • ConditionNew
    • Automatic GradeAutomatic
    • Driven TypeElectric
    ...more
  • CNC Lathe Machine

    CNC Lathe Machine

    Get Price Quote

    We are offering cnc lathe machine. Yankee logic systems and robotics pvt. Ltd. Was started in 1992 with a view of establishing a good quality industrial and office automation products, introduction of new and advance technology, networking and internetworking consultancy for e_commerce business and providing good quality in after sales servicesupport in the revolutionary electronic trade. The company incorporated on 7th march, 1996 as pvt. Ltd.
    ...more
  • CNC Centre Lathe (LC 100 N)

    CNC Centre Lathe (LC 100 N)

    Get Price Quote

     Swing over Carriage 650 - 1000 mm  Distance between centres 3 - 6 metre  Max. wt of work piece 8 - 15 MT  CNC System - Fanuc / Siemens (2 axes)  Centralised lubrication  8 station programmable turret  2 Stage high efficiency transmission head stock  Spring clamped - Hydraulic unclamped tail stock
    ...more
  • CNC Lathe Turning

    CNC Lathe Turning

    54,000 - 55,000 / Piece

    • Number Of FlowerTurning Lathes
    • CertificationISO 9001:2008
    • Country of Origin440V
    • ConditionNew
    • Driven TypeElectric
    • Total Carbohydrate1year
    • ApplicationCutting Wood Materials
    • Weight100-1000kg
    • Automatic GradeAutomatic
    ...more
  • CNC Wood Lathe Machine

    CNC Wood Lathe Machine

    850,000 / Piece

    • MOQ1 Piece
    • Country of OriginIndia
    • Country of Origin240V
    • Maximum Turning Length600 mm
    • Maximum Turning Diameter250mm
    • Spindle Size120mm
    • Spindle Motor Power Fanuc Continuous3.7 kW
    • Max Spindle Speed1500 RPM
    • Power Consumption5.5 kW
    • PhaseSingle Phase
    • Frequency50 Hz
    • Automation GradeAutomatic
    ...more
  • CNC Machine Trainer

    CNC Machine Trainer

    Get Price Quote

    • Automatic GradeAutomatic, Semi-Automatic
    • Country of Origin220 V
    • Power1000 watt
    • Frequency50
    • LayoutHorizontal, Vertical
    • We are the manufacturers and supplier of this products.
  • CNC Lathe Machine

    CNC Lathe Machine

    Get Price Quote

    We are recognized as one of the most Economical CNC Lathe Machine Suppliers in India.Our Principle is largest Economical CNC Machine manufacturer.The CNC Lathe Machine is widely used for industrial applications in industries of automobiles, sanitary wares, electric appliances etc. The CNC Lathe Machine also exhibits unbeatable performance in internal turning, external turning, facing, grooves, taper turning, sphere turning and various screws on cylinder and tapers. Moreover, the other notable features like high durability, resistivity to adverse conditions, consumption of less electricity and maximum output has also played a vital role in the enhancement of the demand in the market.
    ...more
  • CNC Lathe Machine

    CNC Lathe Machine

    Get Price Quote

    • Usage/ApplicationIndustrial
    • SpeedAdjustable Speed Settings
    • ToolingVarious Cutting Tools Included
    • AccuracyHigh Precision Machining
    • AutomationFully Automated Operation
    • We provide a top-of-the-line CNC Lathe Machine designed for industrial applications. With adjustable speed settings, this machine offers high precision machining using various cutting tools included in the package. Its fully automated operation ensures efficiency and accuracy in production. Ideal for manufacturers, our CNC Lathe Machine streamlines the manufacturing process, delivering superior results with every use.
    ...more
  • CNC Lathes

    CNC Lathes

    Get Price Quote

    1986 BIGLIA CNC Lathe Model B2M/CNC, Fanuc CNC Control, Max. Turning Dia. 13.98�, Max. Swing 22�, Spindle Bore (2.75�), Front Bearing ID 5.1�, Max. Spindle Speed 3,500, Axis Drive Slide Z- 12.2�, X- 8.8�, Rapid Traverse X- 394 IPM, Z- 472 IPM, Ballscrew Dia. X- 1.26�, X- 1.57�, 8 Station Turret, 10" Twin Spindle, Twin 6 Station Turret, Chip Conveyor, sn 177734
    ...more
  • CNC Lathe Machine

    CNC Lathe Machine

    Get Price Quote

    • Usage/ApplicationIndustrial
    • Model NumberCNA 400
    • Bed Width500 mm
    • Weight5.3 ton
    • Chuck Diameter400 mm
    ...more
  • CNC Lathes

    CNC Lathes

    Get Price Quote

    CNC Lathes, Automatic Lathes, CNC Machines, Lathes, Electric Tool
Filter by Locality
top