Process Control Equipment Dealers in Okhla, Delhi (44 products available)

• Material: Aluminum, Mild Steel, Stainless Steel
• Finishing: Polished
• Automation Type: Semi Automatic
• Condition: New
• Power Source: Pneumatic
• Feature: Durable, Fine Finished, High Quality, Long Functional Life
• Packaging Type: Box, Carton
• Type: Pneumatic Controllers
• Country of Origin: India

We are offering pneumatic temperature controller. pneumatic temperature controller is basically pilot burner shut off system. The pilot burner helps to light the main burner. In case pilot burner is shut, the main burner will not light and this will cause accumulation of gas in the vessel. There can be backfiring when operator lights the main burner. To avoid this situation, pilot burner shut off system with alarm and gas shut down valve is used. it consists of pilot burner with gas regulator model-l 000/1 this is a standard burner which is used to light the main burner as per. This consists of mixer (b) and adjustable orifice (c).this is supplied with pilot. Which houses the sensing element of low temperature switch. The gas to the pilot burner is supplied by a w' regulator model 400x . low temperature switch model 1100/5 this consists of mercury bulb with capillary tube. The mercury in the bulb expands with rise in temperature, which extends piston stem connected on the other side of mercury bulb. The stem is connected to the knob of micro valve through linkage. The air (output pressure) at the output port of the micro valve is zero when the burner is off or maximum when the burner is on. The sensing element of low temperature switch is housed in thermo well welded on pilot for sensing temperature of pilot burner flame. panel for pneumatic alarm and auto/manual switch model-1100/3 the panel consists of following: (30) auto/manual switch: during normal condition, switch is at auto. When pilot burner goes off, the horn starts blowing. The switch is shifted to manual to avoid continuous blowing of horn. (3b) panel indicator: this indicator indicates 0% (off) when the burner is off and shows 100% (on) when the burner is on. (3c) horn: the pneumatic horn blows when pilot burner extinguishes. gas shut off valve model 11 click here for more details

• Type: Speed Controller
• Color: Green
• Voltage: 220 VAC
• Frequency: 50hz
• Body Material: ABS
• Power Source: Electric
• Color: 60 / 90 / 120 / 180 WATTS
• Name: DIGITAL SPEED CONTOLLER

UX-52 DIGITAL SPEED CONTROLLERUS-52 SPEED CONTROLLERdigital display 120W Electrical Motor Speed Control UX-52 AC Motor Speed Controller 220V 120WAVAILABLE IN 60 / 90 / 120 / 180 WATT UX-52 220V 50Hz Electrical AC Motor Speed Control Pack Motor Speed Control Pack is widely used in packaging, brushing, food, electronics, the medical instrument, glasses machinery industry to the production stage machinery velocity modulation driver. Motor Speed Control use in motor and electric device. Adjust the rate of stability and mechanical properties. Corotation/ Reverse Option, connect CW and COM is corotation, Connect CW and CCW is option. Green LED indicator, on/ off switch for controlling, the knob switch for adjust the speed.

• Voltage: 220vdc
• Frequency: 50hz
• Body Material: ABS
• Power Source: Electric
• Phase: Single Phase
• Warranty: 1year
• Country of Origin: India

Energy Saver. This device save your energy and increase Motor life. Advanced Micro-Controller based Design. Advanced Micro-Controller based Design.For Best Features And Performance. Power Failure Protection This device is Fully Automatic &,Micro Controller Based Design ,Power Failure Protection.(Not Start Motor Every Time on Power Failure.) High Quality Sensor We Provide High Quality SS Sensor For Long Life and Durable Performance .It Has Very Good Conductivity So Never Overflowing Your Overhead Tank. Easy installation Easy installation Any Man or Electrician can do easily help of manual and wiring diagram Durable and Long life This Device is Very Durable and Long life,Made From High Quality Pcb and Component For long Lasting Performance. Description To know how to install this device easily. Package contains: Fully automatic water level controller with indicator 2.Three sensor for up tank. Item specification: 1. Condition: : a, unused and undamag ... Features & details *Saves Electricity, save water.1 Year Warranty *Fully Automatic Controller, Micro Controller Based Design, Power Failure protection. (Not Start Motor Every Time on Power Failure. ) *No Men Power Required To Operate As Fully Automatic with 2HP capacity *Longer Life No Mechanical System /. Avoid Overflow.

We are identified as one of prominent Thermocouple Manufacturers and Suppliers in India. Our Thermocouple Thermometers are tested on the various parameters of quality and other related norms before being dispatched in the market. Furthermore, we ensure careful packaging of Thermocouple that ensures its safety during transit.

Programmable logic controller (PLC) is a control system using electronic operations. Its easy storing procedures, handy extending principles, functions of sequential/position control, timed counting and input/output control are widely applied to the field of industrial automation control. Delta's DVP series programmable logic controllers offer high-speed, stable and highly reliable applications in all kinds of industrial automation machines. In addition to fast logic operation, bountiful instructions and multiple function cards, the cost-effective DVP-PLC also supports various communication protocols, connecting Delta's AC motor drive, servo, human machine interface and temperature controller through the industrial network in to a complete "Delta Solution" for all users.

Digital temperature Indicators and controllers for controlling Temperature from - ve to +ve temperature.Temperature controllers for exact Temperature controls

We have a good rapport with the prominent e-commerce merchants who provide us a secure payment gateway. With this, we guarantee instant and hassle free transactions. With the assistance of our packaging experts and advanced machines, we became capable of meeting the standard as well as customized packaging requirements of the clients.

• Type: Digital
• Power Source: Electric
• Inputs: RTD- PT100

We are offering pc based digital vibration controller. pc based digital vibration controller which uses dedicated adsp processor along with vibroscan series of software for sine, random & shock control, is the brain of the vibration test system. The micron vibration controller mvc3000 derived from the industry standard as per js55555, mil, iso 9000 and other international standards to meet the challenge of higher test performance. Shaker control has never been so easy to opeerate, cost so little to buy and yet so powerful to meet the highest test specification. No other controller compares with the combination of simplicity and powerful control in a package that costs so little. features user friendly windows based software most flexible test reports higher control accuracy faster loop time precise control soft start & shut down wide dynamic range password protection outstanding safety off line analysis.

• Brand Name: Delta
• Manufacturer Series: DVP-EH3
• I/O Points: 16
• Output Type: Digital
• Usage/Application: PLC
• Data Register: 12k words

• Brand Name: Multispan
• Accuracy: +-1% of FSD
• Model Number: MS-1208
• Range: 400 Degree C
• Dimensions: 96 x 96 x 50 mm
• Panel Cutout: 92 x 92 mm
• Output: RS-485 MODBUS Communication (Optional)
• Rated Voltage: 270V AC
• Frequency: 50 Hz

• Application: Water Level Controlleing

• Voltage: 12 V DC
• Usage/Application: Dewatering System
• Brand Name: Electronic Guard
• Maximum Fluid Temperature: 45 Degree C
• Maximum Flow Rate: 30 L/min
• Maximum Output Pressure: 0.55 bar

Anmol smart mobile pump control unit suitable for usage with Sim card of all mobile operators. New Starters Introduced New range of Single phase starters with fixed current relay & Dual Analog VA meter Single phase Starter with fixed current relay & Digital VA meter Three phase Standard DOL & Star Delta starter with Dual Analog VA meter, Hour meter & Rocker switch. Three phase Deluxe DOL & Star Delta starter with Dual Analog VA meter & Hour meter. Mobile controller Unit Starter with Pneumatic Timers Starters with open execution FEATURES Protection against Single phasing, reverse phase, phase unbalance & short circuit protection in Deluxe model. Motor Starters have been designed for easy cable termination New Single colored smart wiring Features for Mobile controller:- 5 Users Mobile controller 3 LED Indicators Get Motor ON/OFF status on Mobile Battery Backup upto 8 hrs Power, voltage & Battery status Easy to operate with SMS or missed call Wall & Panel mounting Suitable foe GSM SIM card of all mobile operators.

• Brand Name: Own
• Features: Rugged design , Trouble-free functioning , Longer working life , Low maintenance, Easy to use.
• Throw Type: Single Throw
• Pole Type: Single Pole

• Features: Precisely temperature control adopting PID algorithm

Front panel also houses all status LEDs. The power outputthermocouple break alarm LEDs give instant status of hotrunner system to operator.The unit consists of standard mainframe units which houses guided plug in controllers. Thus ease of replacement isensured. Mainframe stands with castors are available on demand for easy handling & mobility.A Powder quoted metal housing & mainframes ensures trouble free operation even in Indian harsh conditions. Theside panel features connectors for the load and thermocouples.Standard supply consists of heater & thermocouples cables in SS conduit & mold side connector.

BalaJi MicroTechnologies BMT supply DELTA brand of CNC Controller in the market, we cater to all types of CNC Machine applications like in CNC Turning Machine, CNC Milling Machine etc. We offer fast time to market supply at competitive pricing. delta cnc controller, delta cnc controller india, Cnc controller, delta cnc, delta cnc system, delta cnc solution, delta cnc controller nc300, delta cnc lathe controller, industrial cnc controller, delta cnc machine,delta cnc milling machine, delta cnc wood lathe.

Automatically switch on the water pump when water in upper tank goes below half automatically switch off when upper tank fills. Power-onoff: has rocker switch to select power onoff operation. Mains-indication: it indicates the power supply is reaching up to controller. Automanual-button: if you want to switch on the pump even if the water in upper head tank is full you can by change to manual mode. Need-button: if this button is pressed it will start the pump (even if the level in overhead tank 50% or75%) and after filling the it will switch off the pump. Motor-on: it indicates the motor is on. Dry-run: motor stop if is not pumping water or running dry due to any reason, whether it may be because of no water in sump, or blocks in delivery line, etc. Tank-full: it indicates the over head is full.

Enhances facility and equipment reliability through hot standby CPUs, power supplies and redundant network. Hot Swap IO function allows defective unit replacement during operation.

• Non intrusive, easy to use, user friendly interactive interface.: Fast enrollment and authentication (less than 1 sec)
• Enrollment using RFID / magnetic cards / barcode / numeric keypad: Operating in an extremely large dynamic light conditions.
• Insensitive to beard, scull hair or prescription glasses.: Covering skin texture from milky white to deep black.
• Up to 0.01% false acceptance rate.: Comprehensive reporting system with images
• Cover height 1.40m - 2.15m of individuals.: Interfaces: Ethernet, Weigand, Dry Contact, USB.

We are offering face based system, iris based system. Face entry is the most innovative and advanced biometric solution today that can process an individual's face as a key to grant access of use to premises which need to be secured against unauthorized individuals.

• Material: Plastic And Metal
• Color: Black and White
• Resolution: 14 bit
• Sampling Cycle: 0.5 Sec
• Output Current: 40A
• Input Voltage: DC 3-32V
• Output Voltage: 24-380V AC
• Control Type: PID On/ Off
• No of digits: 4+7
• Display Size: 48*48 mm
• Output type: Relay
• Sensor Input: RTD, Thermocouple
• Temperature Range: 0 Deg C - 400 Deg C
• Weight: 6.53oz / 185g 
•  :  

• Accuracy: 0.1 % of FS , 0.1 % of FS

Model YG 401 Digital Temperature Indicator Micro-controller based, micro-power, precision general purpose thermometer designed for used with type J, K, T, R, S, & RTD – PT100 sensors. Effect of Lead Wire: RTD - 1oC for 10% of nominal resistance per lead of 3 wire RTD's, TC's - 1oC for TC lead wire resistance of 100 Ohm.

• Phase: 1
• Voltage: 220 V AC
• Application: INDUSTRIAL
• Type: Semi-Automatic
• Model Name/Number: DVUS940W1
• Casing Material: PLASTIC
• Brand: PANASONIC
• Digit Display Size: Single Display
• Mounting Type: Panel Mount, Screw Mount

• Application: Used in Pulp & Paper Industries,vessels,Machine & Apparatus construction,furnaces,plastic industry.
• Brand Name: Tempcon Components
• Condition: Good
• Product Name: Resistance Temperature Detectors
• Product Type: PT-50,PT-100,PT 500,PT-1000,NI-100
• Feature: High durability, easy operation, tensile strength, and low maintenance cost
• Place Of Origin: Delhi
• Min. Order Quantity: As Per Client Requirement

We have made our mark as Manufacturer and Supplier of Resistance Temperature Detectors from Delhi, India. We make use of cutting-edge technology for their production in order to infuse significant features such as accurate result, high durability, easy operation, tensile strength, and low maintenance cost.  The Detectors are widely used in Pulp & Paper Industries, vessels, Machine & Apparatus construction, furnaces, plastic industries, Chemical & Petrochemical Industries, Food & Beverage Industries.Types of resistance temperature detectors : PT-50 PT-100 PT 500 PT-1000 NI-100

speed controllers, current controllers, Voltage Controllers

humidity controllers, Automation Products, Counters, Sensors

Data acquisition recorder, Cloud Computing Integration Services

process control instrument