S.M. Engineering Works Tri Nagar, Delhi

Vicat Needle Apparatus can be availed from us as per the requirement. The Vicat Needle Apparatus is used for determining the normal consistency and setting times of cement and 'a' class limes. It is designed with the use of optimum grade raw material and cutting edge technology in a metallic frame. The Vicat Needle Apparatus bears a freely movable rod with a cap at top, one vicat mold, split type and glass base plate and one set of needles. Our Vicat Needle Apparatus is further appreciated for high reliability, easy usage, supreme quality and elevated durability.

Driven Type : Electric

Color : Metallic, Silver

Application : Industrial

Vibrating Table is widely used in various industries for vibrating cement concrete. We are engaged in offering high quality Vibrating Table in different specifications. The Vibrating Table is precisely designed using top notch quality metal and other components by the experienced engineers using modern technology. Known for its efficiency and high durability, our Vibrating Table ensures easy installation and demands zero maintenance owing to its high grade fabrication. Also, it is anti-corrosive in nature.

Weight : 100-1000kg

Driven Type : Electric

Material : Metal

We are reckoned as one of the prime Manufacturers and Suppliers of Vibrating Machine in India. Also known as mold vibrator or mortar cube vibrator, the Vibrating Machine is used for the preparation of mortar cubes for the determination of compression strength of ordinary and rapid hardening Portland cement, low heat Portland cement, Portland bleast furnace cement and high alumina cements. Our Vibrating Machine features a vibrating frame assembly and an electric motor mounted on a sturdy base. The motor drives the shaft of the frame and imparts required vibrations to the mold. The vibration frequency of our machine is 12000 + -400 vibrations per minute. Further, Vibrating Machine can be availed with a set of springs, belt and belt guard.Specifications : The complete frame assembly consists of a vice to hold a 7.06cm cube mold and two studs threaded at top and a hopper to feed the sample in the mold. The center of gravity of the assembly is brought to the center of the eccentric shaft or within a distance of 25mm below it Supplied complete with on 7.06cm cube mold with loose base plate, a time switch 0-60mins x 1min

Material : Metal

Application : Industrial

Being an eminent name in the Indian market, we are offering excellent quality Vee Bee Consistometer. The Vee Bee Consistometer is precisely manufactured in compliance with the set industry norms to ensure flawlessness. It is used for determining workability and consistency of fresh concrete. Featuring slump cone, our Vee Bee Consistometer is provided with a graduated rod that helps the operator to find out slump values. Also, it is designed with a vibration table with container and acrylic disc that is used to find out workability of concrete.Details : Consists of a vibrating table size 380mm long and 260mm wide resting upon elastic support at a height of about 305mm above the floor A holder is fixed to the base into which a swivel arm is telescoped with funnel and guide sleeve The swivel arm is also detachable from the vibrating table A graduated rod is fixed on a swivel arm and at its end a plastic disc is screwed A slump cone open at both ends with lifting handles and a tamping rod of size 16mm dia and 600mm long, rounded at one end

Material : Metal

Color : Metallic, Silver

Application : Industrial

Size : 380mm Long and 260mm Wide

The company has emerged as a prominent Manufacturer and Supplier of Vane Shear Apparatus. The Vane Shear Apparatus is meant for the soft and sensitive soils with shear strength less than 15 KNm2. Providing test results through careful control and compression, the Vane Shear Apparatus can work in the laboratory or fields. A small vane is to be pushed in the soil, with the controlled rotation measuring force needed for maximum resistance.

Weight : 100-150kg

Color : Metallic, Silver

Application : Industrial

Hand Operated:Proving ring type. Comprises of a hand operated load frame, cap. 30KN (3000 kgf.) screw jack for loading, handle and strain dial gauge bracket, adaptor for proving ring, conical seats and male/female coning tools for 38 mm dial samples. Supplied without proving ring and dial gauge. Motorized: Comprises a screw operated load frame capacity 50 KN (5000 kgf.) with a gear box and motor drive giving 1.25, 1.5 and 2.5mm/min, rates of strain, pair of cone seating, adaptor for proving ring and strain dial gauge bracket. Supplied with one pair of male/female coning tools for 38 mm dia samples but without proving ring and dial gauge. Suitable for operating on 230 volts, single phase AC Supply. 

Material : Metal

Color : Metallic, Silver

Application : Industrial

The company has come up as a major Manufacturer and Supplier of Triaxial Shear Test Apparatus. The Triaxial Shear Test Apparatus is meant for the ascertaining of the tri-axial soil shear strength for specimens with 28mm diameter. With a length-to-diameter ratio of 1:2, the Triaxial Shear Test Apparatus comprises of one loading unit for single cell mounting with a capacity of 5 tonnes. There is a motorized load frame, dial gauge bracket, one tri-axial cell for 38 mm dia specimen, stationary bushing, foot pump, rubber hose, dial gauge and high sensitive proving ring. The lateral pressure assembly for the Triaxial Shear Test Apparatus is 0-10kg/cm sq.

Driven Type : Electric

Warranty : 1year

Color : Metallic, Silver

Application : Industrial

We are into the business of providing efficient and reliable Thickness Measuring Gauge. It is used for determining the flakiness index of aggregates. Our Thickness Measuring Gauge consists of a frame along with a sliding panel. Further, the panel has slots of different standard lengths and widths. Avail from us, Thickness Measuring Gauge at very competitive rates.

Feature : Measure Fast Reading, Perfect Strength, Robust Construction

Material : Metal

Color : Metallic, Silver

Application : Industrial

One of the common laboratory equipment, the Soil Test Sieves are used sieving chemical and medical powders as well as sand, soil, aggregate and cement. The company is a highly acclaimed Manufacturer and Supplier of Soil Test Sieves. The common application of the Soil Test Sieves is for grading and determination of the size of the particles, and the diameter frame is 200-450 mm. The Soil Test Sieves mainly have a frame construction of steel or galvanized iron.

Color : Metallic, Silver

Application : Industrial

We are offering efficient and reliable Tar Viscometer Apparatus that is used for determining the viscosity of road oils and cut back bitumen. Our Tar Viscometer Apparatus conforms to the IP-72 and IS 1206 standards. Tar Viscometer Apparatus that we offer consists of SS bath along with cup of 10 mm or 4 mm orifice and sleeve. It also has stirrer with lifting clip and ball. The entire assembly is kept on a suitable stand with leveling screws. Our Tar Viscometer Apparatus is suitable to operate on 220 volts ac mains.Details : Electrical heating with energy regulator control Electrical heating with digital indicator and regulator

Material : Metal

Color : Metallic, Silver

Application : Industrial

The permeability of the soil is one of the important aspects to be studied and that can be done through the Soil Permeability Apparatus. As a Manufacturer and Supplier of Soil Permeability Apparatus, we solve a lot of issues. The results of the permeability checks through the Soil Permeability Apparatus help in the groundwater pumping, excavations in foundation sites and dam designing. The Soil Permeability Apparatus can check the pre-formed as well as re-molded samples as well as the undisturbed samples through constant/falling head methods. The permeability studies can provide inputs on saturated compressible soil layer, equifer flow rate, as well as flow of water through interconnected voids.   Consists of gunmetal mould 100mm dia X 127.3mm height X 1000ml volume, with collar of 100mm dia X 60mm high and drainage base plate, Drainage cap, Metallic clamping ring, two porous stone for base and cap, Dummy plate, air release valve. With a set of three glass stand pipes approx.6mm, 10mm, and 20mm dia X 1 meter length mounted on a wooden board, the end of the glass tube is serrated to connect rubber tube of 3 meter length with pinch cock.

Material : Metal

Color : Metallic, Silver

Application : Industrial

Softening Point App./ Ring & Ball Apparatus that we offer is used for determining the softening point of bituminous materials according to the IP 58 and IS 1205 standards. The softening point is a point of temperature at which the specimen under test becomes soft. Softening Point App./ Ring & Ball Apparatus consists of a heat resistant glass beaker, two ball guides, two tapered brass rings, two steel balls, ring stand and a hand stirrer. Clients can avail Softening Point App./ Ring & Ball Apparatus at affordable rates from us.

Weight : 40-50kg

Color : Metallic, Silver

Application : Industrial

We are a reputed firm engaged in manufacturing and supplying excellent quality Slump Test Apparatus. Slump Test Apparatus is used for determining the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38mm. The Slump Test Apparatus is designed in the shape of the frustum of a cone, open at both ends. Further, it is applauded for its high reliability, efficiency and durability. Consists of slump cone fitted with handles and foot pieces in position. Base plate in octagonal shape, Two clamps slide over the foot grips of a standard slump cone and hold It securely while filling and rodding. A combination swivel carrying handle. Complete with graduated tamping rod 0-60 cms long and 16 cms long and 16 mm dia with 0-30 cms.

Dimension : 300mmx320mmx425mm, 320mmx325mmx450mm

Material : Metal

Color : Metallic, Silver

Application : Industrial

The versatility of the Sieve Shaker makes it usable for the ores, refractory materials and minerals as well as aggregates, pigments, and powdered coal. As a Manufacturer and Supplier of Sieve Shaker, we offer one of the finest equipment to the soil laboratories. Being electrically operated and hand operated, the Sieve Shaker saves plenty of time and effort by easily handling sieving. The Sieve Shaker can also be applied to soap, cement, roofing materials, plastic molding powders and metal powders.   This sieve shaker is designed to carry up to 7 sieves of 6 inch or 8 inch diameter. The 12 inch dia.sieves can be used with the help of Adaptor.  A 1/4 HP motor through a reduction gear immersed in oil drives the shaker. The sieve table dies not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. If the stop-pin below the table is removed. the shaker can have a rotary motion. In addition, to this gyratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilized. A pair of rods and a holder is supplied. The holder can be fixed on the top of the upper most sieves, and thus the sieve set is firmly held. Suitable for operation on 230 volts, 50 cycles single phase A.C. Supply.Adaptor for 30cm dia test sieves can be fitted in above. For 45 cm Diameter Sieves : This sieve shaker is designed to carry up to 7 sieves of 18"  diameter. The shaker is driven by a 1/2 H.P.Electric Motor through a reduction gear. The sieve table does not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction, in addition to this gyratory motion of the table, there is and upward and downward movement at a frequency of about 270 vibration per minutes ensuring that each square inch of the sieve is utilised. The whole gear mechanism runs in an oil bath, without test sieves or time switch. Suitable for operation from 220 Volts 50 cycles A.C. supply. Optional Accessories : Digital Time Switch of 0-99 minutes or above Mechanical Time Switch of 0-60 minutes or above  

Driven Type : Electric

Material : Metal

Color : Metallic, Silver

Application : Industrial

The Shrinkage Limit is the maximum water content that causes no appreciable reduction in soil mass on the reduction of water. The Shrinkage Limit Set is used to determine such data and it can also measure the ratio and index of shrinkage as well as volumetric shrinkage. We are a highly efficient Manufacturer and Supplier of Shrinkage Limit Set, and the apparatus is made up of porcelain evaporating dish, shrinkage dish, glass cup, Perspex plate with three metal prongs, Perspex plate, flexible spatula and glass cylinder (25ml x 0.5ml) without mercury, and the mercury can be supplied in bottle of 500 grams.

Weight : 10-50kg

Color : White

Warranty : 1year

Application : Industrial

The company has acquired an indispensable position in the markets as a Manufacturer and Supplier of Sand Pouring Cylinder. The apparatus of the Sand Pouring Cylinder can have effective results for the in-place determination of the dry density of the soil. Whether the grains are compact, fine or medium, the Sand Pouring Cylinder can handle all types within the layers of 50 cm thickness and the cylinders are available in 100-200 mm.

Condition : New

Color : Metallic, Silver

Application : Industrial

The Relative Density Apparatus has a cylindrical mold of 3000-15000 cm3 and the vibratory table is 75mm x 75mm. The Motorized 230 VAC Relative Density Apparatus runs on single phase and there is a guide sleeve with clamp that is meant for the molds. The surcharge base plate of the Relative Density Apparatus can bear the surcharge weight for 3000 and 15000 cm3, and the other components include handle for base plate, dial gauge holder, dial gauge (0.01 mm x 25 mm) and travel with extension piece calibration bar (75 x 300 x 3mm). The company is a major Manufacturer and Supplier of Relative Density Apparatus.

Driven Type : Electric

Warranty : 1year

Color : Metallic, Silver

Application : Industrial

The company has come up as a major Manufacturer and Supplier of Rapid Moisture Meter, which is useful for the quick determination of moisture content of powdered materials like soil, sand, coal, pottery slip and cement among others. Calcium carbide generates acetylene gas on coming in contact with moisture, and this is the working principal for the Rapid Moisture Meter as well. Certain sample weight is mixed with pre-fixed calcium carbide reagent amounts, and the mixture is shaken in a vessel having pre-attached pressure gauge. The acetylene formed in the reaction generates pressure and the percentage moisture is noted, which is easily converted in dry weight.   Specifications :Chemical 0-50% or 0-25%  direct reading gauge complete in box. Speedy moisture meter that are used for determining the moisture content of materials in powder form i.e. soil, sand, coal, pottery slip, cement etc Consists of : Pressure vessel with clamp for sealing cap Rubber sealing gasket Pressure gauze calibrated in percentage moisture content A counter poised balance for weighing sample A scoop for measuring carbide reagent A bottle for thorough mixing fitted in a wooden carrying case with handle

Weight : 400-500g

Color : Metallic, Silver

Application : Industrial

The company has made its mark as a Manufacturer and Supplier of Proving Rings. The Proving Rings are used for load measurements as well as in outfits of varied soil, cement, & bitumen testing equipment. Made using forged steel for maximum strength, sensitivity, and stability, the Proving Rings have a long life and amazing accuracy levels. The Proving Rings can be availed in different capacities arranging from 50-200000 KGF. The Proving Rings consist of dial gauge, plunger anvil, loading bosses, loading ball nipple and steel ball.Working : Compressive or tensile load is applied within the elastic range temporarily deforming the rings Measurement of deformation by sensitive dial gauge fixed co-axially at the center of proving ring Readings of dial gauge readings versus load applied enable operator to find out unknown load by noting dial gauge reading for unknown load High elasticity ensures retention of shape on removing load if loaded in elastic limits

Material : Metal

Capacity : 100-1000nm

Application : Industrial

The Pore Pressure Assembly can efficiently measure the pore water pressure and air pressure in the soil. As a Manufacturer and Supplier of Pore Pressure Assembly, we offer a complete set that has a panel meant for wall mounting that can be used for triaxial test mounting. The Pore Pressure Assembly consists of pressure gauges, bourdon tubes, manometer and burette. The accurate measurement of the soil sample for water and air pressure makes the Pore Pressure Assembly popular in scientific circles. The Pore Pressure Assembly also consists of a mercury trap, null indicator, pressure pump, hand wheel, piston rods and copper coils.

Material : Metal

Color : Metallic, Silver

Application : Industrial

The moisture level wherein the soil has the smallest plasticity levels is known as limit, and plastic limit is basically the water content where soil crumbles on being rolled in to a 3 mm dia thread. As a Manufacturer and Supplier of Plastic Limit Set, we offer a complete set for the study of the plastic limit. The dimensional accuracy of the components makes the Plastic Limit Set effective and efficient in its work.Components : Glass plate 20 cm x 15 cm having ground ends and one side frosted Brass or stainless steel rod 3 mm dia x 150 mm long Flexible spatula Set of 6 moisture containers Porcelain basin 150 mm dia Plastic wash bottle 500ml

Material : Plastic

Pattern : Plain

Feature : High Strength, Quality Tested

Marshall Stability Test Apparatus is utilized for designing and evaluating bituminous paving mixes. The test is carried out as a routine test program for paving jobs. The test is applicable to hot mix designs that use bitumen and aggregates up to a maximum size of 25mm. Our Marshall Stability Test Apparatus consists of a motorized loading unit with two telescopic pillars and an adjustable cross head. Limit switches are also installed inside in order to control the upward or downward movement of the pillars. The two majors features of Marshall Stability Test Apparatus are density voids analysis and stability. The marshal stability of a particular mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 60oC. The Apparatus Consists Of : A loading unit motorized with capacity 5000 kgf with two telescopic pillars and an adjustable cross head Limit switches are fitted inside to control upward or downward movement of the pillars. On-off reversing switch and indicator lamps are on the front side while a hand wheel to manually move the pillars is on the right. The load frame has fixed speed of 5.08cm per minute, operated on 230 volts A.C. 1 no. compaction pedal with specimen mold holder 2 nos. compaction rammers, 4.5kg weight and free fall 45.7cm 1 no. breaking head assembly with provision to fix flow meter 3 nos. specimen mold 10.16cm i.d. x 7.6cm high with base plate and extension collar 1 no. kit for specimen extraction, consists of one each load transfer bar, steel ball, specimen extracting plate Accessories : Integral type proving ring capacity 3000 kg A dial gauge 0.01 x 25mm

Driven Type : Electric

Material : Metal

Color : Metallic, Silver

Application : Industrial

Marshall Stability Test Apparatus is utilized for designing and evaluating bituminous paving mixes. The test is carried out as a routine test program for paving jobs. The test is applicable to hot mix designs that use bitumen and aggregates up to a maximum size of 25mm. Our Marshall Stability Test Apparatus consists of a motorized loading unit with two telescopic pillars and an adjustable cross head. Limit switches are also installed inside in order to control the upward or downward movement of the pillars. The two majors features of Marshall Stability Test Apparatus are density voids analysis and stability. The marshal stability of a particular mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 60oC.

Material : Metal

Color : Metallic, Silver

Application : Industrial

Ball Mill is a kind of grinder that is widely used for grinding materials into a fine powder so as to be used in mineral dressing processes. Our Ball Mill is suitable for grinding lime mortar. Ball Mill that we offer operates on the simple principle of impact in which the size reduction is done by impact. Our Ball Mill is known for its sturdiness owing to its steel construction. It has internal diameter of 12 inch x 13.5 inch long (volume 1 cu.ft.) and is made of 5/16 inch thick steel plate. The speed of the rotation of specimen is 30-33 R.P.M. It is also provided with a tight cover to close the opening and a revolution counter for recording the revolutions of the mill. 12 ¾ inch diameter steel balls are also supplied with the unit and is fitted with a 1 H.P. electric motor to operate on three phase, 440 volts A.C. supply.

Driven Type : Electric

Material : Metal