Unioversal Scientific Pvt. Ltd. Badli, Delhi

Located in Delhi(India), ours is the name trusted for meeting the exact requirements of the clients. Listed amidst the renowned Suppliers of Vibrating Table, we successfully deliver the finest range of products the clients. It is used for compacting concrete cubes and cylinders   Specifications : Sizes - 75cmx75cm & 100cmx100cm. To carry out a load of 140kg. The unit consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means of off balance masses rotating on a shaft of a vibrator clamped to the underside of the table top. The table top is 50cm x 50cm and has stops along its edges to prevent moulds form walking off the table during vibration. A cross arm adjustable on a vertical rod at the centre of the table is provided to hold the moulds while operating the table. The variable pitch pulley arrangement permits the frequency to be varied step Lesley between a maximum of 3600 vibrations down to 2600 vibrations per minute. A speed regulation handle is provided for increasing or decreasing the frequency a switch is provided for starting the motor. Suitable for operation on 440 Volts, 3 phase, 50 cycles, A.C.Supply.

Number Of Flower : Automatic

Certification : CE Certified

Country of Origin : 220V

Power : 1-3kw

Driven Type : Electric

Total Carbohydrate : 1 Year

Concrete Moulds are easily cast by using a tamping bar or a vibrating table. However air trapped in cement mortar paste can not be thus removed while casting cement mortar moulds. Easy method is to impart greater vibration of lesser amplitude to the mould while casting. This is achieved in a Mortar Vibrating Machine. Mortar Vibrating Machine is used for the preparation of mortar cubes for the determination of compression strength of ordinary and rapid hardening Portland cement, low heat Portland cement, Portland blast furnace cement and high alumina cements.   Specifications : The machine consists of a vibrating frame assembly and an electric motor mounted on a sturdy base. The complete frame assembly consists of a vice to hold a 7.06cm cube mould and two studs threaded at top and a hopper to feed the sample in the mould. This assembly is supported on four springs and has an in built rotating shaft which rotates eccentrically and thus imparts vibrations to the entire frame. A balance weight is an integral bottom part of the frame. The centre of gravity of the assembly is brought to the centre of the eccentric shaft or within a distance of 25mm below it. The electric motor drives the shaft of the frame and thus imparts required vibrations to the mould. The frequency of vibration is 12000 ± 400 vibration per minute. Supplied complete with a 7.06cm cube mould and loose base plate, a time switch 0-5mins x 1 min and certificate of vibration.

This is used for determination of resistance to wear for cement concrete flooring tiles. Tiles specimen of size 7.06cm x 7.06cm is pressed tace wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding path and after specific number of revolutions of the grinding disc the second parallel side of the tile is subjected to wear for similar under of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 rpm in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A pre-set counter automatically stops the machine after 22 revolutions. This counter is re-adjustable. The machine works on 440 volts AC, 3 phase electrical supply.

Number Of Flower : Automatic

Certification : CE Certified

Availability : 100-1000kg

Country of Origin : 220V

Rated Power : 3-5kw

Driven Type : Electric

Brand Name : UNIVERSAL

Display Type : 3 1/2 Digit LCD

Power : 1 x 9V Battery

The apparatus is used for specific gravity determination of concrete and aggregates. It consists a steel frame, a water container fitted in the steel frame where the height of container is adjustable, a 15kg x 0.1 gm digital balance with bottom hook and a cradle for holding testing specimens.

The apparatus is used for the laboratory determination of permeability of soils using a constant or a variable head. This test is recommended for soils with coefficient of permeability in the range of 10 to 10 cm/sec. The maximum particle size of the soil which can be tested in the mould is 10mm.

Number Of Flower : Designer

Application : Laboratory

Certification : CE Certified

Country of Origin : 220V

Driven Type : Electric

Temperature Range : 0-5 Deg C

Total Carbohydrate : 1 Year

Brand Name : Universal

Frequency : 50 Hz

Application : Laboratory

Pan mixer capacity 40Litres 3 phase 440 volts fitted with 2hp standard motor.RPM 30 TO 35. Only quality packaging material has been used for the packing of the products that we offer. Moreover, the entire packaging procedure is conducted under the supervision of the experts. We make sure that our payment procedure is safe and simple. We offer our clients methods like online payment gateway, electronic funds transfer, cash, bank deposits and various others.

Number Of Flower : Portable

Certification : CE Certified

Application : Industrial Use

Country of Origin : 220V

Power : 3-6kw

Driven Type : Electric

Total Carbohydrate : 1 Year

Automation Grade : Fully Automatic

After-Sales Service Provided : Spare Parts

Laboratory Concrete Mixer. Designed to remove the burden some work of hand mixing. Uniform thoroughly mixed batches can be produced. The counter balanced drum is easily to tilt 1  to 2 Cu.Ft.mix. The total drum volume is however 3 Cu.ft. Mounted on a sturdy rubber typed stand, the drum is mounted for end discharge and equipped with end towing pole. Equipped with 1 H.P. electric motor, suitable for operation on 220 volts, single phase 50 cycles A.C.supply.

Number Of Flower : Automatic

Certification : CE Certified

Availability : 400-500kg

Total Carbohydrate : 1 Year

Driven : Hydraulic

Feature : Impeccable performance, Longer service life, User friendly

Application : Heaters

Shape : Round

Country of Origin : Made in India

The offered oven is manufactured with the help of quality approved material and advanced technology. This oven is tested on various stages by our professionals as per the set industrial norms. It is ideal for performing under high pressure and temperature in various industries.

Number Of Flower : Automatic

Material : Metal

Certification : ISI Certified

Application : Dry Heat To Sterilize

Country of Origin : 220V

Frequency : 60Hz

Power : 5-10kw

Driven Type : Electric

Total Carbohydrate : 1 Year

After-Sales Service Provided : Spare Parts

Flexure Testing Machine IS - 516, BS 1881, ASTM C78 Flexural tests of concrete beam have their own importance in concrete Road Constructions as well as Buildings Constructions. Normally concrete beams of sizes 10cm x 10cm x 50cm or 15cm x 15cm x 70cm are tested for flexural strength. Specifications: The unit include a hand operated load frame. The lower platen has two rollers, the distance between which is adjustable. For 150mm x 150mm x 170mm beam, the centre to centre distance between the rollers is 600mm while it is 400mm for beams of size 100mm x 100mm x 500mm. The upper platen has also a pair of rollers whose distance is adjustable. It is 200mm centre to centre, for 150mm x 150mm x 700mm size beam and 133mm for 100mm x 100mm x 500mm size beam. A pressure gauge to indicate load is fixed on the load frame. A small pumping unit is attached to the load frame. Total capacity of the machine is 100KN and a 150mm dia pressure gauge 100KN x 1KN is fitted on the machine. Since this is a hand operated light weight machine, it is useful for field laboratory purposes also.

For testing aggregates for resistance to abrasion. It consists of a disc rotating about a shaft connected to a reduction gear box coupled to a motor. The disc rotates at 28030 revolutions per minute. Under the rotating disc there is a tray with an outlet to facilitate the removal of sand. Two conical hoppers are mounted on a bracket. An arrangement is made to start and stop the flow of sand. Two containers with weights are supplied to keep the specimen pressed against the rotating disc. Suitable for operation on 220 volts, 50 cycles, A.C.supply.

Availability : 150-200kg

Country of Origin : 220V

Driven Type : Electric

Total Carbohydrate : 1 Year

With the aid of our sophisticated packaging system, our skilled personnel are able to meet the standard as well as customized packaging requirements of the clients. Moreover, we check the entire lot before dispatch. Our payment procedures are well documented, legal, and safe. We provide our clients with numerous online and offline options for making purchases and make sure they are protected.   Details : Single Speed Twelve Speed The apparatus comprises of the following : Loading Unit - Supplied with loading yoke with direct and lever for applying load. Normal stress capacity 8Kg/Sq.cm. Load is applied either directly or through a counter balanced detachable lever. Provision is made for the load to be applied either through a steel ball recessed in the loading pad or direct through a boss on the pre calibrated loading. Yoke. The loading unit is provided with V strips and roller.

Number Of Flower : Automatic

Certification : CE Certified

Application : Laboratory Use

Availability : 100-150kg

Application : 220V

Power : 3-6kw

Driven Type : Electric

Total Carbohydrate : 1 Year

Machine is suitable to Cut/Drill cores of Concrete and the similar material. The machine is suitable for core samples of size upto 100mm diameter with the help of thin walled Diamond bits which are at extra cost. The machine has sturdy base with pillar support in which rack & pinion is provided for adjustment in height and penetration assembly. The leveling screws are provided at the base. For gripping the sample in position suitable grips are provided. Greaves Make 5 H. P Diesel Engine is fitted in the machine with cooling arrangement with water. The base frame is also fitted with wheels for ease of transportation.

Number Of Flower : Automatic

Certification : CE Certified

Availability : 100-1000kg

Country of Origin : 220V

Rated Power : 3-5kw

Total Carbohydrate : 1 Year

After-Sales Service Provided : Spare Parts

This Three Gang Consolidation Testing Apparatus is rigidly manufactured from aluminum alloy casting to provide a high degree of accuracy with any frame distortion under load. The load bridge group is supported in high accuracy self-aligning seat balls. The beam provides three loading ratio: 9:1 10:1 11:1 and the beam assembly is fitted with an adjustable counterbalance weight. It consists of 3 consolidation test assemblies mounted on a single frame. Complete with 3 sets of Consolidation cell.

Number Of Flower : Automatic

Material : Stainless Steel

Certification : CE Certified

Country of Origin : 220V

Driven Type : Electric

Phase : Double Phase, Single Phase

Total Carbohydrate : 1 Year

Temperature : 0-50°C

It is used for determining permeability of cement mortar and concrete specimens of 15cm cast in the laboratory. Consist of a M.S cell, water reservoir and pressure lines, with glass bottles.

Number Of Flower : Automatic

Application : Laboratory

Certification : CE Certified

Country of Origin : 220V

Driven Type : Electric

Temperature Range : 0-5 Deg C

Total Carbohydrate : 1 Year

Compression Testing Machine Without Gauge Channel Model, designed to conduct compression and crushing strength tests on Containers , Concrete cubes & cylinders, hollow blocks and various other materials in accordance with Indian and/or International standards.The machine is also suitable for conductin Cold Crushing Strength test on refractory specimens. The machine is electro-hydraulically operated and is capable of accommodating test specimens upto 15 x 15 x 15 CM.

Availability : 100-200kg

Country of Origin : 220V

Driven Type : Electric

Shape : Cube

Brand Name : Universal

Material : Cast Iron

Application : Industrial

Material : Stainless Steel

Brand Name : Universal

Usage : Industrial

Brand Name : Universal

Application : Construction

Brand Name : Universal

Country of Origin : 230 V

Driven Type : Electric

Country of Origin : Made in India