Impact Testers Dealers

Aggregate Crushing Value Apparatus : Alpha Chem is manufactures,exporter & suppliers Aggregate Crushing Value Apparatus.  Aggregate Crushing Value Apparatus : Consists of M.S. Cylindrical Container 150mm +/-0.5mm dia x 130mm to 140mm high with base plate 200 to 230mm/sqr x 6mm thick. A Plunger of 148mm +/-0.5mm dia x 100 to 115mm high. Supplied complete with Tamping Rod, 16mm dia x 600mm long, both ends rounded, 1 no. Metal Measure 115+/- 0.5mm dia x 180 +/- 0.5mm high. On Special Request Aggregate Crushing Value Apparatus having 75mm dia or 300mm dia cylinder size can be supplied.

The pendulum Impact Tester, Model IT-30 is designed for conducting Izod, Charpy test. The test methods confirm to  BS : 131 : Part 4-1972 (Amended 15 Aug. 1993) BSEN : 10045-2 : 1993 & ASTM : E-23-94a. The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for Izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale. (It is read on digital readout in case of electronic machines.)There are two strikers and one combined support available for fitting in to the pendulum and on to the base of the machine for the Izod, Charpy test respectively, Changing from one striker to another is achieved simply by fixing the new striker into it's position.   The charpy test piece rests on alloy steel support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports.

It is for determining the aggregate impact value and has been designed in accordance with IS:2386 (Part 4 ), IS:9377. The sturdy construction consists of a base and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 ± 5 mm. The hammer is provided with a locking arrangement.

Product Description Our customers can avail from us impact resilience testers that are known for their quality and long service life. These testers are highly demanded all over the world among rubber industries. These testers are playing an active role in the determination of the elasticity of elastomeres, soft elastic foamed materials. In addition to it, these testers are comprised of basic bench with anvil and exchangeable anvil plate. Offered at nominal rates, these impact resilience testers are highly appreciated by clients.

Description :-This equipment is used to determine crushing properties of aggregates. The aggregate crushing value indicates the ability of an aggregate to resist crushing. The lower the value, the stronger the aggregate, that is the greater is its ability to resist crushing.Applications: The aggregate crushing value provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. The important application area of the equipment are : Cement & Concrete industry Construction (Building, Roads, Bridges, Dams, etc.) Mining Ceramic Industry Calibration Laboratories/Test Houses

  It is for determination the aggregate impact value and has been designed in accordance with BIS-9377-1979. The sturdy construction consists of a base and support columns to form a rigid frame work around the quick release trigger mechanism to ensure and effective free all of the hammer during test. The free all can be adjusted through 380 + 5 mm. The hammer is provided with a locking arrangement.

Charpy Test : The charpy test piece rests on alloy steel support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports.Izod Test : The Izod test is clamped vertically in Izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece and the Allen screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied.Model IT-30 ( ASTM ) : This impact tester offered with 300J energy exclusively for Charpy test confirming to ASTM E-23. This machine is geometrically checked in the works to the more stringent requirements of the American standard. The accuracy of the machine is then verified by PROOF TEST by testing standard test specimens supplied the NIST, USA. Two sets ( Low & high energy-1 Set (4 Nos.) each.) must agree with the normal values within certain tolerance specified.

FBI-PT 3008  Code No. FBI-PT 3008 For determining the impact strength of the boxes/containers made from cardboard, plastics or wooden materials. Different models available in capacities ranging from 600-6000 pounds with necessary modification in respect of track length, dolly size etc. Ruggedly built design to withstand continuous usage. Has automatic release mechanism. Complete with traveling chain driving motor.

Our organization takes pleasure to introduce its business as one of the leading entity Impact Testing Machines Calibration Services . The machines are made available in manual and digital options. The pressure, gauge, mechanism, operation and timely deliveries are tested and calibrated by our experienced engineers. They offer the complete pressure calibration solutions with high capabilities. With outstanding accuracy and hefty digit resolution, these machines can be used in critical industrial applications where precision is most important. Features:Measure temperatureSimulate RTD outputOperable with seven typesApplications:SurgicalTextile RubberR D Labs