Sensors Dealers in Hyderabad

Established in 1979, ITRES is headquartered in Calgary, Alberta, Canada. ITRES has two satellite offices, located in Victoria, Canada, and Englewood, Colorado, USA. ITRES has been commercially selling airborne hyperspectral sensors since 1989.

We are offering pc board mountable pressure sensor. 0-100 mv output gage, differential and absolute temperature compensated the model 1210 is a temperature compensated, piezo resistive silicon pressure sensor packaged in a dual-in-line configuration. It is intended for cost sensitive applications where excellent performance and long-term stability are required.

Print mark sensor, • Fully integrated Vision Sensors, • Bar Code Scanners, • Colour Sensors , • DistanceThickness Sensors , • Print mark Detectors

5 in 1 Stagnant Occupant Sensor, Bus Enabled, Energy Pilot, with Ultrasonic Cali ratable Distance sensor for occupancy, LUX, PIR, Security, and Energy Saving Distributed intelligence, for both automation and security use, (PIR Detection Angle = 110 Degrees, PIR Adjustable detection. Range 10 Meters diameter), (Ultrasonic Distance Adjustable 1-4 meters)

The type J is also very common. It has a smaller temperature range and a shorter lifespan at higher temperatures than the Type K. It is equivalent to the Type K in terms of expense and reliability.  Temperature ranges ·        Thermocouple grade wire, –454 to 2,300F (–270 to 1260C) ·        Extension wire, 32 to 392F (0 to 200C)

Item Code: RHT-A Features: Wide Measurement Range: RH: 0 to 100% RH Temperature: - 40 to + 60 °C ( Optional: upto 100 °C) High Accuracy: ± 1.8% RH; & ± 0.3 °C Low Drift, High Stability Sensor made in Switzerland. Splash proof construction with Protection filter Temperature Compensated Compact construction: 16 mm Dia x 120 mm long Independent 0 to 1V Outputs for RH & Temperature Integral 1 m cable Attractive pricing. SPECIFICATIONS Measurement Range Relative Humidity : 0 to 100% RH; Temperature: - 40°C to +60°C Accuracy : Relative Humidity: ± 1.8% RH; Temperature : ± 0.3°C Reproducibility: Relative Humidity: ± 0.2% RH; Temperature : ± 0.1°C Response Time : < 15 sec to reach 90% of the value Output : 0 to 1 V for 0 to 100% RH; 0 to 1V for - 40°C to +60°C Power Supply : 8V to 14V DCcrc Dimensions : 120 mm Long and 16 mm Dia. Cable : Integral 1 meter Shielded Cable

1. On-board MMA7361 (replace MMA7260) low cost micro capacitive accelerometer; 2. Support 5 V 3.3 V voltage input, on-board RT9161, more than 1117 of the low pressure drop, faster load, very suitable for high speed corresponding noise power environment; 3. Range through the single-chip microcomputer IO choice, also can choose resistance; 4. Commonly used pins have drawn into standard needle, for 100 (2.54 mm), mil-convenient for bitmap board; 5. Dormancy can make by single chip IO control; 6. PCB board double-sided gold-plated, size: 27.9 (mm) x16.8 (mm) 7. After purchase principle chart, test program attached and related material can be supply. Package Included: 1 x MMA7361 Accelerometer tilt Sensor Module

Our Temperature Sensor (Type RTD-Pt100) is high on demand across the nation for its ability to provide clients� desired results in the tough industrial applications. Our Temperature Sensor (Type RTD-Pt100) is precisely designed by the experts, based on which we can assure its durability and reliability. SpecificationsConfiguration : SimpleInsulation : Mineral InsulatedExtension wire : SilverSheath Material : SS � 316Sheath Dia : As per orderLength : As per orderCalibration as per DIN 43761Element conn. : ½� BSP (M) adj.Complete with die cast aluminum head, nickle plated Brass terminals and porcelain terminal block.

Avail from us superior quality Magnetic Proximity Sensors at the most competitive prices. Our Magnetic Proximity Sensor is manufactured from quality components by trusted vendors and ensures a highly reliable performance. The Magnetic Proximity Sensor supplied by the company is highly precision-engineered and is demanded for numerous purposes. Why Our Magnetic Proximity Sensor? Highly durableHassle free functioningEasy to operateEasy to installHighly accurate Specifications : Sizes : from M3 to M50, RectangularRange : 0.5mm to 120mm in InductiveRange : up to 2 meters in Magnetic proximitiesUp to IP 69 protections & extra sensing ranges Special application : Ceramic / Teflon / SS bodies, 2 wire Quadronorm type, sensor with 5 side adjustable sensing

We allow our patrons to make payment through a variety of methods. We are comfortable with patrons making payment through online or offline mediums that are legal and trusted. We provide customized packaging solutions, as we understand each customer is unique. The packaging we provide is strong, non-toxic, and capable of braving shipping and handling.   Specifications: Standard range 0 to 250°C; other ranges available SS316 sheath PTFE insulated and jacketed cables. Stainless steel overbraided cables available Supplied with 1 meter cable or in multiples thereof Bayonet caps and fitting made of plated brass. SS304 caps and fitting available

We are suppliers of burners & boilers spares, monarch nozzle, danfoss nozzles,sequence controllers, suntec pumps, gear pumps, photocells, ignition transformers, flame sensor, duplex filters, ignition electrodes, temperature controllers, sensors, blower fans, burner motores, pressure switch thermic fluid pumps & its spares, blast tubes, boilers coils, solenoidcoils, heaters, level switch,& more.

We are manufacturer of uv sensor, steam boiler/ incinerator/ hot air/water generator/ thermic fluid heater/ autoclave / bio medical waste shredder / burner/boiler & its spares/supplying of synthetic thermic fluid oil/ .

We are offering v georadar ground penetrating radar. This ground penetrating radar (gpr) has been designed specially for treasure hunting. The gpr can find subsurface heterogeneities, such a cavities, tunnels and other objects. All gpr are excellent to survey in rocks and sands, good in rather dry soils without clay, and useless in soil with clay and wet soils. For treasure hunting all gpr are useful to survey in rocks, and usually useless in soils, because of most soils have high conductivity. The obtained information immediately appears on the laptop display. The gpr can find good, subsurface cavities larges than 1metre x 1m x 1m, with an almost flat ceiling. Smaller objects will be found with difficulty and not so deeply. The laptop can be any, with windows xp or vista, and usb port , 1.4ghz or more. The gpr can to be carried by a single operator. In the sounding process, the operator is getting real-time information as a radiolocation profile (radar gram) on a display (on a notebook). the gpr draw the radar gram for 60 seconds (in this time operator can see the received part of the radar gram), after that operator can record it on a hard disc with any name for further use, orand start new. The gpr can scanning with the time window (time that gpr receive after transmit pulse) 50ns, 100ns or 200ns.wen the operator carry the gpr, antennas must be from 5 to 20 centimetres over the ground surface. Distance between antennas can be from 0.5 to 1.5 meter the antenna system is dipole, unshielded, air coupled. Antennas 75mhz - length-1,5m, depth-10m 100mhz - length-1m, depth-8m 150mhz - length-0,75m, depth-6m 250mhz - length-0,5m, depth-4m 350mhz - length-0,3m, depth-3m current consumed - 0.4a from 12v battery weight - kg 4 with battery depth - detection depth - distance between ceiling of a cave in rock(limestone) and ground surface . If a ceiling is flat or oval and cavity is large. Depth is dependent on the parameters of the rock or soil with the gpr you will be able to detect cavities in rock or sands with dimensions width xm, length xm, height xm at a depths 2*xm. As an example if a cave have width 2m, length 2m, height 2m and flat or oval ceiling, the gpr will can detect the cavities on depth 4m in rock. The gpr can detect cavities in rather dry soil without clay with dimensions width xm, length xm, height xm on depth xm. As an example if the cave have width 2m, length 2m, height 2m and flat or oval ceiling, gpr will be able to detect the cave on depth 2m in soil. M=metrе if the ceiling is not flat or oval, or is acute, the depth is smaller. When the soil is wet, the depth is smaller. In practice it is very difficult or impossible to predict how deep gpr can see in soil because it is depend from soils characteristics. In the "world atlas of ground conductivities" you can to see if your region is suitable for gpr survey, if a gpr will have good depth. If ground conductivity is less than 1msm the conditions are perfect. If ground conductivity is more than 10msm , gpr will be useless in this region , you can to use a gpr only on rocks in this region.