Sensors Dealers in Navi Mumbai

This is an AC current measuring sensor featuring CT technology, CT stands for current transformer, a transformer unit split in two half like a clamp for measuring alternating current source.  Non-invasive AC Current Sensor can measure a load up to 10 Amps AC source, simply clamp the current sensor on the live wire or neutral wire. The sensor measure the amount of current flowing through the wire. The output is a small AC signal which can be further use for energy meter application or for over-current protection of AC devices. To facilitate the application need the sensor has 3.5mm jack on the output side. Popular application of Non-invasive current sensor are like safe working on the high voltage electrical lines, protection of over current of the electrical device like AC motor, Air compressor.   Input Current 0-10 Amp AC Core Material Ferrit External Material Plastic Opening Size 13 x 13mm Output Plug 3.5mm Dielectric  Strength 6000V AC/1min Working Temperature -25-70°C Cable Length:  1-1.5m

Ground penetrating radar is a nondestructive geophysical method that produces a continuous cross-sectional profile or record of subsurface features, without drilling, probing, or digging. Ground penetrating radar (GPR) profiles are used for evaluating the location and depth of buried objects and to investigate the presence and continuity of natural subsurface conditions and features.

we are proud to offer another scientific jewel from our inventory in the form of duct humidity sensors that are praised by our clients for easy installation and mounting process. Widely used in different industries for measuring relative humidity and temperature, the duct humidity sensor offered by us has been termed as the best option available in the market. use : for measuring relative humidity and temperature of gaseous mediafor connection to control and display systems specialty : easy installationdirectly mountedincludes mounting flange used with : fresh air ductsexhaust air ducts applications : heating systemscooling systemsair-conditioning systems

PLS-type Bin Level Indicators have been specially developed & designed for electric signalling by rotatory action of minimum or maximum material level inside bins, hoppers or silos. i.e. Paddle remains stationary till the time powder is in contact & starts no sooner powder level goes down the paddle radius. Salient Features Suitable for varity of powders having bulk density in the range of 0.6 to 2T/M3.Available in AC/DC voltage as per customer request. Ex-Stock delivery For more details on this product please send us an email on info@cosben.in or click here.

We are offering sensors. 1. Photoelectric 2. Position 3. Proximity 4. Ultrasonic 5. Force 6. Magnetic 7. Current & voltage all our products are from reputed manufacturers like emerson, abb

Fiber optic sensors are perfect solutions for various detection applications by using remote sensors with fiber optic cables and amplifiers.

The c015 series is adjacent measuring thermocouples designed for measurement of surface temperature of moving or rolling materials, such as heating rollers, press rollers and running sheets. The thermocouple has the built-in automatic correction circuit for the difference between surrounding air and actual temperature of an object.

Measuring and calculating the pressure difference between two areas, Radix Differential Pressure Transmitters are especially popular in pharmaceutical plants that must maintain a pressure gradient across the facility to prevent cross-contamination. These instruments are generally installed on the service floor above the two areas and paired with our Room Display Indicator, Hawkeye, to indicate differential pressure for operators, whilst simultaneously transmitting the same measurements to a SCADA for datalogging.

The most commonly employed measurement principle is to measure the liquid's velocity and the pipe area Flow rate = Velocity x Area. The HARIS paddle wheel flow sensor, works on this simple but accurate principle. Four blades spin past a sensor in the housing body. As the fluid flow causes the rotor to rotate, a signal is produced proportional to the flow rate. The design of the rotor ensures a linear repeatable output upto a flow velocity of 7 msec with an accuracy of ± 0.06 ms.

Electronic recording replaces strip chart recorder, saves on consumables ? Compact size metallic enclosure with smallest depth saves space ? Remote data transmission via RS232 RS485 ? A parallel port is provided to interface any dot matrix printer ? Up to 32 universal inputs record all measuring signals ? Multicolor 8 inch TFT Display with 640x480 resolution provides a digitai & graphicai curve display for each channel ? Stores reliably the data of each channel at predefined time with internal flash memory retains the same even in event of power failure! ? A PC software package provided to interface with any PC ? Direct access to stored data in MS? Excel format on PC

We are offering process temperature controllers, temperature scanners. these controllers are mainly used for cooling as well as heating applications. Rtd is used to measure the temperature. applications include - cold rooms - process industry. - chilling plants - chemical plants 4 step temperature controller in 96 x 96 mm size -50 to + 50 c in 0.1 degree resolution

Used in jigs and fixtures as positioning control for raw workpieces. The response accuracy is constantly at 0,005 mm and can be achieved with a working pressure of 2,5 bar. The system is monitored by the compressed-air backwash which indicated on the monitoring unit (Art. No. 22800.0612). Material Ball Ball-bearing steel, hardened Body Heat-treated steel, tempered, phosphated Notes Further information on request. OrdertableAssembly examples