Distribution Transformers Dealers in Hyderabad

Subjected to rigorous and strict quality controls at every stage of manufacturing, Designed to meet latest national international standards like BIS, IS, IEC, ANSI, BS, DIN, etc., Wide range of Transformers duly tested at Central Power Research Institute, Bangalore , Bhopal Quality assurance programme available   Off-circuit tap changer to provide +5% to -5% in steps of 2.5% (or as specified by customer) On-load tap changer to provide +5% to -15% in steps of 1.25% (or as specified by customer) 3 Phase, 50 Hz in voltages of 11 KV, 22 KV and 33 KV Continuous duty Painting as per IS / IEC standards Vector group Dyn 11 Standard fittings as per IS: 2026 / IEC 76 / BIS 1180 HV side cable box/Bare Bushings LV side cable box / bus duct Design conforms to BIS 1180 & IS:2026, BS 171, IEC 76 and other relevant standards Latest manufacturing techniques to ensure cost effectiveness and reliability Designed for 25 years of trouble - free performance Very low power loss and low noise Optimum utilization of active materials for sleek design Withstands electrical impulses, thermal and dynamic stresses  

Distribution transformers for industrial application is available in 3 or 1 phase version with primary voltages of up to 33 KV and secondary voltages ranging from 433 to 11000 V. The capacity range is up to 10000 KVA. We manufacture single phase distribution transformers, three phase distribution transformers and industrial distribution transformers.    These single phase distribution transformers and three phase distribution transformers are available with 'Tap Changer' options as well as "Off Circuit Manually Operated" and "On Load Tap Changer" (OLTC) with AVR and RTCC panel.    Prime quality, low loss, high permeability "Cold Rolled Grain Oriented" silicon steel is used for core to achieve low no load losses.    These industrial distribution transformers have electrolytic copper with insulating paper multi covered round wires and strips are used for both the primary and secondary windings to achieve low load losses.    Copper foil winding technology is used for high current sections to achieve following advantages:        Sustaining short circuit forces without any distortion in low voltage and high current windings     Hot spot in LV windings regulated     No transposition, stray losses are minimal. Thus total copper losses are also further reduced     Total copper losses reduced vis-a-vis standard losses. Thus heat dissipating area also reduces

Features & Benefits: Design flexibility for optimal costs Tapered or full width layer insulation in HV windings Hermetically sealed Fast lead times Meets IEC ANSI BS standards

Cast resin dry type transformer 11 kV/433V, 3phase, 50 Hz. Off circuit tap links::!: 5% in steps of 2.5% Class F and H insulation. HV Delta connected, LVStar connected with Dyn 11 vector group. Natural air cooling and forced air cooling Dutycycle- continuous Winding- copper duly resin casted Enclosure -IP 23 to IP 33 and as per customer specifications. Cable boxes on HVand LV Painting shades as per ISand IEC standards Standard Fitting Rating and diagram plate

We have gained a credible name as a Manufacturer and Supplier of Distribution Transformer. We assure that the Distribution Transformer that we offer is fabricated by clubbing the finest quality materials and the most advanced production techniques. These Distribution Transformers are best appreciated for their superior performance and high durability. Backing from a highly proficient team of expert professionals helps us to provide highly functional Distribution Transformer to the clients.   Why Our Distribution Transformer? Precisely engineeredEasy and safe operationHigh operational reliabilityReasonable pricing

We manufacture power and distribution transformers, that is very wont to management the ability distribution to individual masses and applicable output voltage to fit your system. Our merchandise comprise of the many advanced options concerning voltage choice as well as off circuit faucets and on load faucets. we have a tendency to conjointly offer everywhere head line equipment’s, accessories, insulators, conductor, connectors, hard glows, rubber matting etc. Kunda Transformers Pvt. Ltd. is one of the best Manufacturer of Distribution Transformers in Hyderabad Telangana India.

And this domestic and LT static provides precise reading (voltage) at either step down or step up mode. It is made possible with stringent GMP backed with years of experience. We provide best in class Distribution transformer which range from 11KV to 22KV voltage class and average rating starts from 10kVA onwards. We strictly adhere to international standards and certifications backed with GMP and best in class service provider.

Our Distribution Transformers have the largest satisfied customer base. Dedicated to providing environment friendly quality solutions and commitment to delight customers with unique value propositions.

DISTRIBUTION TRANSFORMER POWER TRANSFORMER 6.6 KV, 11 KV, 25 KV & 33 KV Upto 30 MVA Lowest Capacity is 5 KVA APPLICABLE STANDARDS IS, IEC, ANSI, JIS, BS, DIN, ETC.

We have designed and developed Distribution Transformer that meets the latest national/international standards like is, iec, ansi, bs, din, etc. Our distribution transformer has been subjected to rigorous and stringent quality measures at every stage of manufacturing. We offer distribution transformer at the most discounted price in the industry. features designed to meet latest national / international standards like is, iec, ansi, bs, din, etc.subjected to rigorous and strict quality controls at every stage of manufacturingquality assurance programme availablewide range of transformers duly tested at central power research institute, bangalore. specifications3 phase, 50hz in voltages for 11kv, 22kv and 33kvoff- circuit tap changer to provide +5% to -10% taps in steps of 2.5%on- load tap changer to provide +7% to -21% taps in steps of 1.75%class a insulated copper woundvector group dyn 11 continuous dutypainting as per is / iec standardshv side cable box, lv side cable box / bus ductstandard fitting as per is 2026 / iec 76salient featuresdesigned for 25 years of trouble free performancedesign conforms to is 2026, bs 171, iec 76 and other relevant standardsvery low power loss and low noisewithstands electrical impulses, thermal and dynamic stressesoptimum utilization of active materials for sleek designlatest manufacturing techniques to ensure cost effectiveness and reliabilityapplicationstube millseducational institutionsresidential & commercialrolling plantspharmaceuticals unitsrice millsfood processing unitstelecom centersclubscold storage

Our distribution transformers have the largest satisfied customer base. Dedicated to providing environment friendly quality solutions and commitment to delight customers with unique value propositions.

Our Distribution Transformers have the largest satisfied customer base. Dedicated to providing environment friendly quality solutions and commitment to delight customers with unique value propositions.

Product range distribution transformer power transformer 6.6 kv, 11 kv, 25 kv & 33 kv upto 30 mva lowest capacity is 5 kva applicable standards is, iec, ansi, jis, bs, din, etc. Transformer options cooling tubesradiatorscorrugated tanks pole mounted ground mounted free breathing hermetically sealed

We are counted among the leading Manufacturers, Suppliers and Exporters of Three Phase Transformer. Manufactured with high grade material and cutting-edge technology, we offer premium quality Three Phase Transformers with 50/ 60 Hz or 400 Hz frequency. Clients can avail Three Phase Transformers from us at the market leading prices.   Application : step up , step down ,power system voltages ,battery chargers, power sources, solar power wind powerSpecifications Mains frequency : 50/ 60 Hz or 400 Hz Core type shell & core type : (EI ,C core, uni-core strip, R core) 3 to 2 phase or Scot or T transformer : Shell.& core type ( EI, C core, uni core, Strip, R core) 3 phase choke : Core type (C core, EI  & strip)   Note : Durable compact, reliable & affordable

Auxiliary transformer, A transformer is a device that transfers electrical energy from one circuit to another through inductively coupled Inductive coupling the transformer's coils or "windings”. Except for air-core transformers, the conductors are commonly wound around a single iron-rich core, or around separate but magnetically-coupled cores.

Three Phase Oil Filled Distribution Transformer

Oil Filled Transformer, Power Distribution Panel, Power Transforme

Oil Filled Transforme

Three Phase Transformers, Step Down Transformers, Control Panel Transformer

We are offering Distribution Transformer

Oil Immersed Power Transformer, Distribution Transforme

Oil Cooled Current Transformer, AMF Panels, Power Transforme

Power Distribution Transformer