Hardness Tester Dealers in Ichalkaranji, Kolhapur

 Basic machine design & operation similar to B-3000 (H). In addition ‘optical  device’ with 14 x magnification provided in front to project dia of ball  impression on glass screen with a micrometer measuring system with  0.01mm accuracy. The indentor swivels & projects dia of ball impression  immediately after unloading operation which avoids additional time for  measurement of ball impression  ARUN Hardness Testers, Model B-3000 (H) & Model 3000 (O) are  precision engineered confirming to IS : 22281 – 1968, BS : 240 and ASTM :  E 10, however B-3000 (H) & B-3000 (O) are most suitable for production  testing. These machines are designed to measure hardness of castings,  forgings, other metals and alloys of all kinds, hard or soft, whether flat,  round or irregular in shape.

Motorised Rockwell Systems Hardness Testers - Model RASN (M)• Suitable for Rockwell Tests• Motorised for automatic operation cycie e load/unload• Preliminary Test Force - 98 07N (10kgf)• Addition. Test Force - 490.3, 882.6, 1373N  (150, 90, 140kgf)• Total Test Force - 588.4, 980.7, 1471N  Test force selection by external dialing, Auto zero setting dial gauge     Rockwell Systems Hardness Testers - Model RASN• Suitable for Rockwell Test• Manually Operated• Preliminary Test Force- 98.07, (10kgf)• Additional test force - 490.4, 882.6, 137N, (50, 90, 140 kgf)• Total Force Selection by external dailing• Auto zero setting dial gauge Rockwell Cum Brinell Testers - Model RASN (B)• Same as RASN above, in additional• Additional Test Force - 1471, 2354 N, (177.5, 250 kgf)• Total Test Force - 1839, 2452 N, (187.5, 250 kgf)     Rockwell cum Rockwell Superficial Hardness Testers - Model RASN (T)• Suitable for Rockwell & Rockwell superficial tests• Manually operated• Preliminary test force - 29.42, 98.07 N,  (3.10 kgf)• Additional test force - 177.7, 264.8, 411.9, 490.3, 882.8, 1373 N, (12.27, 42.50 & 140 kgf)• Total test force - 147.1, 294.2, 441.3, 588.4, 980.7, 147 N, (15, 30, 45, 60, 100, 150 kgf)• Auto zero setting dial gauge     Motorised Digital Hardness Testers - Model RASN (E)• Digital Hardness Tester for Rockwell tests• Motorised for automatic operation cycle ie. load / unload• Preliminary test force - 98.07 N, (10kgf)• Additional test force - 490.3, 882.6, 1373 N, (50, 90, 140 kgf)• Total test force - 588.4, 980.7, 1471 N, (60, 100, 150 kgf)• Test force selection by external dialing• Set position with LED bar indicator for easy operation• Key board entry through reliable membrane switches for scale / GO-NOGO/ dwell time selection• Large size scale display for easy reading with 0.1 Rockwell resolution• Parallel output for connection bot matrix printer to get result indication serial number of sets,   Hardness scale, Hardness value and high / good / low indication. 'MCS' new 'RASN' series of Hardness Testing Machines come with much improved design and look with following major design changesThe machine body is having a taper front look and a big size dial gauge in the front. The machine is powder coated for far better look. The paint shade do not fade and machine looks like new over year.The elevating screw of machine is guided in a hardened and ground bush, not allowing movement of elevating screw more than 0.05 mm when raised to full height The accuracy is retained for years together due to hardened bushA hardened and ground stepped bush is fixed on top of main screw for location and test surface. This guarantees no change in results due to rough handling of test table or test piece. It means a trouble free long life machine accuracy.An antifrication linear bearing with almost no clearance is provided for a perfect vertical movement of loading plunger with minimum friction This enables testing of small dia pin or ball upto 3 mm dia.All machine models are provided with automatic zero setting dial gauge or digital readout. Hence zero setting at every test is avoided.All four models confirm to respective standard as underIS:3804, BS 10109-2 & ASTM E-18 for Rockwen TestIS:5073 BS 10189-2 & ASTM E-18 for Rockwell Superficial TestIS:2281 BS 10003- 2 & ASTME - 10 for Brinell Test   Optional Accessories :• Steel Ball Indentor 1/8", 1/4", 1/2"• Testing Table 200mm dia• Testing Table 70mm dia with "V" groove for round jobs 10 to 80mm• Van -Rest to support odd shaped jobs• Jominy test fixture for end quench test• Gooseneck Adaptor No.1• Special Diamond lndentor suitable for Gooseneck Adaptor No.1• Short nib diamond lndentor suitable for Gooseneck Adaptor No.1• Gooseneck adaptor No.2• Special Diamond Cylinder anvil for testing by jobs above 20mm dia.• Everyball anvil with 25.4 dia or 38mm dia ball• Gooseneck anvil for pipes 5 to 25mm ID with 5mm step inserts• Jack rest for long and heavy jobs• Dot matrix Pnnter for Model RASN (E)  

The company has acquired the status of the leading Manufacturer, Exporter & Supplier of Vickers Hardness Testing Machine. The Model-TVM 50 Vickers Hardness Testing Machines is one of the simplest and most accurate when it comes to the hardness measurement of precision metallic parts. The Vickers Hardness Testing Machine produces and measures diamond indentation and has a wide testing range varying from soft to hard. Features Robust machine frame designed to accommodate the high precision loading system Strictly conforms to IS: 1754 – 1986Optical projection screen also available Testing table for placing specimens Fully automatic test cycleAccurate load applied automatically on diamond penetratorsObjective indexed with test piece Diamond indentation projected on measuring screensDiagonals of indentation measured by means of the micrometer screw of projection screen

We are a proficient manufacturer, exporter and supplier of computerized brinell hardness tester model no. - kb-3000 (o) from mumbai, india. Our model 2 kb-3000 (0) is an electrically operated hardness testing machine, which is suitable for mass testing of components made of steel and other materials whether flat or round. Our computerized brinell hardness tester model no. - kb-3000 (o) is accessible at very reasonable prices.

We are engaged in offering Brinell Hardness Testing Machine that is used for testing the hardness of metals and alloys. Our Brinell Hardness Testing Machine allows loading and unloading operation manually by durable operating lever. Salient Features Precisely designed as per BS: 240, IS: 2281-1968, and ASTM: E10.RB-3000Easy to operateDurableLess wear and tear Ideal For Measuring hardness of casting and forging of hard, soft, whether flat, round and irregular shapes metals and alloys

To keep up with the set international standards, we have incorporated the latest machines and cutting-edge technology to sternly examine the material used for production. Purchasers can trust us to deliver orders within the specified period. Our goods can be ordered in wholesale as well as in retail. Our avant-grade digital rockwell hardness testing machine is available with a quality warranty of 12months against any manufacturing defect. 

Features Mechatronic Control System Hardness Testers Models SE RAS, SE RASM, SE RAB-1, SE RAB-250, SE TWIN are manually operated. All these models are suitable for testing hardness of metals & alloys of all kinds hard or soft, whether flat, round or irregular in shape. These testers are simple in design & easy to operate, yet sensitive & accurate. Various models from the wide range are suitable for Engg. Colleges, laboratories, toolroom, inspection departments, factories etc. These testers strictly conform to IS: 3804-1988, BS: 891 parts 1&2, ASTM:E18 for Rockwell Test, IS: 2281-1983, BS: 240, ASTM:E10 for rockwell Test & IS: 5073-1988, ASTM:E18 for Rockwell Superficial Test. MODEL : Mech.CS.RAS : Automatic load selection with automatic zero setting dial gauge. Manual Operation. MODEL : Mech.CS.RASM : Similar to 'Mech.CS.RAS1 but motorised model. Semiautomatic operation for production testing. Drive motor single phase 230V 50 cycles. ROCKWELL/rockwell COMBINED SYSTEM MODEL Mech.CS. RAB-1 : Automatic load selection with automatic zero setting dial gauge. Facility for rockwell Tests with 187.5 kgf. load with 2.5 mm ball indentor, additional load 250 kgf. with 5 mm ball Indentor for testing hardness of non- ferrous metals. Manual Operation. MODEL : Mech.CS. RAB-250 : Similar to 'Mech.CS.RAB-11 but bigger capacity Diamond Holder is guided in a set of two bail cage, which enables testing of small pins having dia. less than 6 mm (upto 3mni dia) ROCKWELL/ROCKWELL SUPERFICIAL COMBINED SYSTEM MODEL : Mech.CS.TWIN : Manual load selection with automatic zero setting dial gauge. Manual Operation. Diamond Holder is guided in a set of two ball cage, which enables testing of small pins having dia. less than 6 mm. (upto 3 mm dia.)   SERIES RASN: Rockwell & Rockwell superficial tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force & the measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement or hardness value. OPERATION : For Rockwell & Rockwell Superficial OPERATION : For Rockwell & Rockwell Superficial Test : In case of 'RASN' series machines for Rockwell or Rockwell Superficial Test a preliminary test force in first applied & then indicator is automatically set for zero. Quickly thereafter & additional test force is applied without removing the preliminary test force. When the penetration is stabilized, the additional test force is removed & the hardness number is shown directly on the indicator. For rockwell Test The operation is exactly same as above. However, the diameter of impression is measured out side of machine by rockwell microscope. rockwell Hardness number is found out by referring corresponding hardness tables showing hardness number against di. of indentation for specified ball diameter and test force.   MODEL RASN Suitable for Rockwell Tests. Manual operated. Priliminary Test Force - 98.7N (10 kgf.) Additional Test Force - 490.3, 882.6,1373N (50, 90,140 kgf.) Total Test Force - 588.4, 980.7,1471N (60,100,150 kgf.) Test Force selection by external dialing. Auto zero setting dial gauge. Rockwell cum rockwell Tester: Model RASN (B):   Same as RASN above in additional Additional Test Force - 1471, 2354N (177.5, 240 kgf.) Total Test Force - 1839, 2452N (187.5, 250 kgf.) MODEL RASN (M)   Suitable for Rockwell Tests. Motorised for automatic operation cycle (load / dwell / unload) Additional Test Force - 490.3, 882.6,1373N (50, 90,140 kgf.) Total Test Force - 588.4, 980.7,1471N (60,100,150 kgf.) Test Force selection by external dialing. Auto zero setting dial gauge. MODEL RASN (E) : (DIGITAL)   Mechatronic Control System’s Hardness Testers Models RAS, This models is suitable for testing hardness of metals & alloys of all kinds hard or soft, whether flat, round or irregular in shape. These testers are simple in design & easy to operate, yet sensitive & accurate. Various models from the wide range are suitable for Engg. Colleges, laboratories, tool room, inspection departments, factories etc. These testers strictly conform to IS: 3804-1988, BS: 891 parts 1&2, ASTM:E18 for Rockwell Test, IS: 2281-1983, BS: 240, ASTM:E10 for Rockwell Test & IS: 5073-1988, ASTM:E18 for Rockwell Superficial Test. MODEL : RAS Automatic load selection with automatic zero setting dial gauge. Manual Operation.

we offer vickers hardness tester that is suitable to be used for testing various products & raw materials. This computerised vickers hardness tester model: model vm 50 pc is reckoned for its state-of-the-art features, thus, has great market demand. We offer the vickers hardness tester to the clients at reasonable price. specifications vickers hardness tester model : vm – 50 pcbuilt in projection screen to get accurate resultstests loads : 5, 10, 20, 30 & 50 kgf.scale least count 0.001 mm features fully computerised (pc based) vickers hardness machinedirect and accurate measurement of vickers hardness number using "state of art" image processing technologywide testing range' : from soft metal such as lead up to medium hardened steelshigh accuracy and repeatability of measurement at all loadsfaster measurement yielding to higher productivitysmall size of indentation makes it a non destructive testing on finished components motorised loading and unloading cyclesmall loads allow testing of thin sheet metalsadvanced window xp based software latest gui features user friendly software with all help file and window features online indentation setting and focusing on pc monitoradvance image processing : algorithms implemented for precise calculation of hardness numbers with various options to cover all ranges of specimen

Simple to operate and accurate test results are some of the guarantees that are given by this Vickers Hardness Testing Machine. This Vickers Hardness Testing Machine measures hardness of any accurately designed metallic part. The tested specimen (metal) can range from soft to hard. Conforms To : IS : 1754 :2002 & ISO 6507-2 : 1997 Features : Tiny indenation allows testing of a precision finishedWide testing range, from soft metal such as lead, up to the hardest, like hardened steelSame hardness number is obtained on the same specimen, Regardless of the load appliedMotorized loading and unloading cycleThin Sheet metal is perfectly tested. Because applied load is very smallBuilt-in Projection screen to get accurate"AI" make Vickers Hardness Tester is simple & accurate in design, It is Suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard & their accurate results are widely acclaimed.These testers strictly coform to IS :1754 :2002 & ISO 6507-2 : 1997

Rockwell & Rockwell Superficial tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value. Test Force Selection by external dialing.

Test Block, Hardness Testing Machin

Brinell Hardness Tester, Universal Testing Machine, Rockwell Hardness Teste