Clarifier Dealers in Mumbai

• Brand Name: Bio Techno Lab

The Laboratory Flocculator, offered by us, is used to estimate the dosing of alums and such other coagulants for treatment of water & effluent. With the use of our Laboratory Flocculator, the samples are easily viewed by diffused base illumination with fluorescent tube placed below plastic plate & black background. The Laboratory Flocculator is fitted with D.C. motor of 1/20 HP with variable speed up to 50-100 RPM controlled by speed regulator.Other Details : Provided with stainless steel paddles with adjustable spacers to adjust the depth of paddles Estimate the dosing of alums & such other coagulants for treatment of water & effluent. Samples are easily viewed by diffused base illumination with fluorescent tube placed below plastic plate & black background. Fitted with D.C. motor of 1/20 HP with variable speed upto 50-100 RPM controlled by speed regulator. Provided with stainless steel paddles with adjustable spacers to adjust the depth of paddles.   No. of Stirrers Two Stirrers Four Stirrers Six Stirrers

We are offering dissolved air flotation units. Daf is a gravity seperation process whereby the separation of two phases is achieved by increasing the specific gravity difference of the two phases. This is achieved by attaching micro air bubbles, brought about by saturating water with air under pressure, and then expanding the wa terstream through valves to atmospheric pressure. These micro bubbles nucleate onto the solid particles to be separated, thus lowering the specific gravity and allowing contaminants to rise to the surface. suspended solids, grease and oil are very efficiently removed by daf, and a combination of screening and daf results in bodcod removals upto 60% depending on the application.however, a combination of flocculation and floatation can result in bod removals of around 80-90%.

• Features: Strong structure, Durability , Less maintenance.
• Item Code: BC09

CLARIFIER Clarifiers are widely used for reducing suspended solids load by coagulation and settling method. High Rate Solids Contact Clarifier is used in Applications, where the inlet solids load is variable and if the solids are fine. Flocs formed in flocculator are settled in Tube or plate (lamella) settlers or in the settling zone of a clarifier. These equipment are used in river or lake water for high flow rates and also in ETP STPs Lamella Clarifier Lamella Clarifier is a water treatment process that features a rack of inclined metal plates, which cause separate liquid and solid, by directing the water between a series of inclined plates.We have established ourselves as a renowned manufacturer and supplier of Settling Tanks / Lamella Clarifier. Our products are highly appreciated by the clients for providing an effective solution for the clarification of water and waste water.

Clariflocculators are widely used for chemical primary treatment for effluent water. These Clariflocculators are designed and developed to provide an economical and faster installation of primary treatment. The innovative design enables the clariflocculator to handle heavy slugs while delivering shortest floc settling time.We supply different type of clariflocculators with built in flocculation well and paddle type flocculator in the flocculator well which help in creating flocks. There is no need to give separate flocculation tank with flocculator.

PP CLARIFIER 2868 is a high performance sorbitol based clarifying agent that Reduces haze and enhances the clarity of polypropylene through nucleation of The polymer. This also leads to enhanced stiffness of the molded part and to Shorter cycle times during the molding process. PP CLARIFIER 2868 is produced using a highly sophisticated process that Makes it a unique product for clarifying polypropylene.

Clariflocculators are mostly used for chemical primary treatment for effluent water. These filters are designed to provide an economical and faster installation of primary treatment. The innovative design enables the clariflocculator to handle heavy slugs while delivering shortest floc settling time. Our range of Clariflocculators features high torque centre drive with sludge arm lifting device.  

• Weight: 100-500kg
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 3-5kw
• Driven Type: Electric
• Warrenty: 1year

Features Large air-absorption capacity and low energy consumption Optimistic structure design & Excellent performance Reasonable circulation of mineral slurry Automatic control Easy to adjust DescriptionWith the development of mining industry, investors present various requirements of the features of flotation machine. Now there are many kinds of flotation machines, such as agitator flotation machine, pneumatic flotation machine and pneumatic- agitator flotation machine. And different mineral ores have different hydrophilicity, so the final configurations greatly depend on the professional designs.ApplicationFlotation machine are mainly used in mineral ore dressing plants, selecting the valuable mine from gangue. It is applicable for the separation of numerous of mineral ores, such as fluorite and talc, gold ore, copper ore, iron ore and zinc ore and so on.

We are engaged in offering a wide range of flash mixers, which are specially designed and fabricated for the process requirement of water and wastewater treatment. The mixer design ensures efficient, minimum energy consumption and long life. This equipment blends coagulants and other chemicals with water / wastewater prior to flocculation. The aggressive agitation results in instantaneous and effective mixing of chemicals. This unit is also useful for general mixing.   The complete range of our flash mixers are available in various designs and models and can be customized as per the details provided by the client. The entire range of Flash Mixer delivered by us is highly acknowledged for their durability, reliability, accurate finish, precision engineering and optimum performance.   Applications   • Steel Industry Blast Furnace, Electric Arc Furnace, BOF, etc   • Fertilizer Industry Phosphate Rock Dryers & Calciners, Dryers   • Non-Ferrous Copper Reverberatory Furnace, Laea Blast Furnace   • Pulp & Paper Lime Kilns, Back Liquor Recovery, Bark Boilers   • Sugar Industry Boiler Flue Gas, Bagging Section   • Mineral Products Asphalt Stone Dryers, Cement Kilns   • Pharmaceuticals Tablet Coating Fans, etc  

• Weight: 100-500kg
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warrenty: 1 Year

Features of Flotation Machine Large air-absorption capacity and low energy consumption Optimistic structure design & Excellent performance Reasonable circulation of mineral slurry

• Automation Grade: Automatic
• Rotational speed: 7,000 - 9,000 Rpm
• Number of Discs: 150
• Separation distance between Disc: 0.5 - 0.6 mm
• Driving Principle: Centre Driven
• Installation/Civil Work: Installation Available

• Features: Resistant to corrosion, Superior quality raw material, Easy to install

The INDION lamella clarifier provides an effective answer for the clarification of water and waste water. The lamella clarifier achieves solid-liquid separation by directing the liquid between a series of inclined plates called lamella. The settling surface of each plate is equivalent to its horizontal projection. Lamellae are normally spaced approx. 50 mm apart, with the result that large settling surfaces are concentrated within a relatively small floor area.

Tube settlers and parallel plates increase the settling capacity of circular/rectangular clarifiers by reducing the vertical distance a floc particle must settle before agglomerating to form larger particles. This is based on settlement of colloidal particles by providing a larger surface area.Tube settlers use multiple tubular channels sloped at an angle of 60° and adjacent to each other, which combine to form an increased effective settling area. This provides for a particle settling depth that is significantly less than the settling depth of a conventional clarifier, reducing settling times. Tube settlers capture the settleable fine floc that escapes the clarification zone beneath the tube settlers and allows the larger floc to travel to the tank bottom in a more settleable form. The tube settler's channel collects solids into a compact mass which promotes the solids to slide down the tube channel.   ADVANTAGES1. High Settling rate2. Settling of smaller flocs also3. Tube Settler media increases the settling area hence area required compared to Conventional Clarifier is less than half

• Automatic Grade: Automatic
• Power: 370W
• Warrenty: 2 Years
• Machine size: 1350*1100*1650mm
• Label accuracy: ±1mm
• Label Length (Max.): 150mm

Technical features and advantages Large air-absorption capacity and low energy consumption Optimistic structure design & Excellent performance Reasonable circulation of mineral slurry Automatic control Easy to adjust

• Automation Grade: Semi-Automatic
• Type: Circular
• Treatment Capacity: 160 MLD
• Industry: Pharmaceutical Industry
• Brand Name: Indofab
• Tank Diameter: 70 m
• Speed of Flocculator Paddles: 400 mm/second
• Detention Time (in hours): 4 Hour
• Speed: 2500 mm/minute
• Bridge Width: 1.5 m
• RPM: 0.50 RPM

• Automation Grade: Manual
• Pay Mode Terms: T/T (Bank Transfer),Other
• Industry: Pharmaceutical Industry
• Motor DC: 1/20 HP
• Variable Speed: 50-100 RPM 

• Voltage: 220V
• Power: 3-5kw
• Driven Type: Electric
• Type: XJK
• Supply Ability: 2 Set/Sets per Week
• Port: Qingdao,Tianjin, Shanghai or others
• Application: Used in ore beneficiation line

Flotation cell can be often seen in ore dressing factory, which is applied for sorting non-metallic material, and which is one important flotation plant. And what's more, flotation concentrator can be used for sorting the metal material including copper, lead and gold. And flotation cell is also being called flotation separator, flotation machine and flotation-cell. The working principle of flotation cell: The mineral pulp being added pharmacy will be passed into the gas, and the electric rotor will bring the movement of part pieces to mix and stir in order to make the mineral and gas be sufficiently mixed, and at this minute, the grain of mineral pulp is above on the bubble, floating on the surface, which can reach the purpose of sorting the mineral material through blade scrapings. This machine is often used in the flotation process of mineral ore. Flotation separation process: It refers to the flotation process in particular; the flotation process of every material is different, because some mineral material has the higher combination ability with the water, which is difficult to be above on the bubble. We must inspect and examine the mineral ore before selection, and ore much be classified by grinding in order to reach one suitable density and fineness of flotation process. CME mining machinery majors in producing the ore flotation equipment. Welcome to have a visit and purchase some machines that you need.

Fixed type full span structural bridge with platform upto the centre with 1000mm high handrails. High torqueSMB make centre drive with 1 HP motor, Radicon or reputed make gearbox, chain drive, etc., two scraper arms having neoprene squeeges, RPM is 0.08 Center Scraper is provided. Inlet MS tank is hanged from the bridge. All wanted parts are MS epoxy painted and other parts are enamel painted. The scraper arms lifting hand operated mechanism is provided so that in case of overloading the complete assembly can be lifted manually.   The unit would consist of:1) Fixed full bridge with walkway and handrail from one end to centre.2) Influent (feed) well.3) Drive arrangement consisting of motor (Crmpton), gear box (Radicon), pulleys, V-belts, base plate.4) Heavy duty bearing housing to take care of indulations, torque and loads.5) Central shaft.6) Rake arms with blades and tie knots.7) Rake blades in sludge hopper.8) All pipes, including inlet, outlet and sludge pipes are excluded from our scope.

Introduction Sewage Treatment Plants are installed and commissioned at various industries for treating waste before discharging them into water bodies. The plant receives the waste from domestic, commercial and industrial sources and removes the harmful materials from the sewage that damage water quality. The prime objective of a sewage treatment plant is to make the industrial effluents free from elements that are harmful for human and environment. We offer following equipments: Clarifier Clariflocculators Effluent Treatment Systems Water Pollution Control Systems Waste Treatment Plants Working Principle Preliminary Treatment: Removal of coarse solids and other large materials found in raw wastewater Primary Treatment: Removal of settle-able organic and inorganic solids by sedimentation, and the removal of float-able materials by skimming Secondary Treatment: Removal of residual organics and suspended solids Application All these sewage treatment plants are used for treating sewage and effluents coming out from commercial establishments, residential areas and industries. Clarifier

Flash Mixer, Thickener, Flocculator, surface aerator

Flower Nozzle, PVC Transparent Pipes, pvc casing capping

clariflocculator, Water Treatment Plants, Mixer, Industrial Stirrer

Sunrise Process Equipments is a progressive company working in the domain of manufacturing and exporting of a wide array of Clarifiers in India.

Laboratory Flocculator, offered by us, is used to estimate the dosing of alums and such other coagulants for treatment of water & effluent. With the use of our Laboratory Flocculator, the samples are easily viewed by diffused base illumination with fluorescent tube placed below plastic plate & black background.

Reverse Osmosis Equipment, Water Treatment System, Water Recycling System

pp clarifier, clarizol

distilled water plant, floating aerators, Oxygen Measuring Transducer