Pressure Sensors Dealers in Mumbai

• Country of Origin: Made in India
• Brand: Atlas Copco
• Size: Small
• Operating Temperature: -40 to 105 Deg C
• IP Protection Class: IP67
• Packaging Type: Box
• Torque: 40 Nm

We are bracketed among the trusted Suppliers of Industrial Pressure Transducers. The Pressure Transducers offered by us with reverse polarity protection on input and short circuit protection on output. Our range of Transducers is extensively used in refrigeration systems, automotive test stands, agricultural equipment, etc. Buyers can obtain it competitive rates from us.

• Type: Oil Pressure Sensor,Pressure Sensors
• Application: Industrial Use
• Condition: New
• Warranty: 1 Year
• Country of Origin: India
• Accuracy: 100%
• Supply Voltage: 12 - 24 V DC
• Features: Low Power Use, Simple, Rugged Design

• Material: Plastic
• Application: Enforcement Use

We are a Dealer, Supplier of Keller. We stock and supply running models are Keller Pressure Transducers, Keller OEM Pressure Transmitters, Keller Intrinsically Safe Pr. Transmitters for Hazardous Applications, Keller Submersible Level Transmitters, Keller High Precision Digital Pr. Gauges, Keller Pneumatic & Hydraulic Pressure Calibratorsa. We are supplier in India, Mumbai, Delhi, Ahmadabad, Chennai, Pune, Nashik, Vapi, Aurangabad, Nagpur, Sangli, Satara, Ichalkarnji, Solapur, Kupwad, Kolhapur, Pimpri, Chinchwad, Jalgaon, Silvassa, Surat, Baroda, Morbi, UAE, Indore, Bhopal, Gurgaon, Faridabad, Ghaziabad, Noida, Coimbatore.  

• Response Time: 5 ms
• Supply Voltage: AC 24 V
• Brand Name: Siemens
• Current Consumption: 20 mA
• Model Name/Number: QBE2002
• Temperature: -40 Degree C To 80 Degree C
• Frequency: 50- 60 Hz
• Features: Piezo-resistive measuring system. DC 0 ...10 V output signal. Measurement unaffected by changes in temperature. High temperature stability. No mechanical aging or creepage.

• Linear analog voltage: Absolute Pressure in kPa = (Voltage x 21.79) + 10.55 typical
• +/- 1.5 kPa (15 mb) max. uncorrected offset (+/- 0.443 inches Hg): Calibration sheet included with each sensor specifies offset correction

BP20 Barometric Pressure Sensor A micro-machined absolute pressure sensor, the BP20 provides a high-level voltage output signal that is proportional to absolute pressure.   The BP20 pressure sensor includes built-in temperature compensation, linearization, and an output amplifier. Its low cost and rugged ABS enclosure make the BP20 ideal for collecting absolute pressure data at remote sites.     Specifications  BP20 Barometric Pressure Sensor (#2046) Description Sensor type Micromachined integrated circuit absolute pressure sensor Applications Wind resource assessment Meteorological studies Environmental monitoring Sensor range 15 kPa to 115 kPa (4.43 inches to 34.0 inches Hg) Instrument compatibility All Symphonie Data Loggers Output signal Signal type Linear analog voltage Transfer function Absolute Pressure in kPa = (Voltage x 21.79) + 10.55 typical Accuracy +/- 1.5 kPa (15 mb) max. uncorrected offset (+/- 0.443 inches Hg) Calibration Calibration sheet included with each sensor specifies offset correction Turn on time 15 ms Power requirements Supply voltage 7 V to 35 V DC Supply current 15 mA max. (8 mA typical) Installation Mounting Mounts directly to tower or inside steel shelter box with hose clamps (included) Tools required 8mm (5/16 inch) nut driver or flat blade screwdriver Environmental Operating temperature range 10 C to 50 C at full accuracy At cold temperatures, offset increases by 3 kPa (30 mb) worst case at -30 C. Physical Connections Wire leads, 3 conductor shielded cable: Red: sensor power White: output signal Black: sensor ground Shield wire: to earth ground Cable length 1.5 m (5 feet) cable diameter 4.8 mm (3/16 inches) Weight 0.1 kg (0.2 pounds) Dimensions 57 mm (2.25 inches) diameter 112 mm (4.4 inches) length (including cable bushing) Materials Cable 3 conductor 22 AWG, with overall foil shield and drain wire, chrome PVC jacket Enclosure Weatherproof black ABS

Differential pressure sensor High and low pressures are separated by a sensor assembly consisting of a magnet, pistons, Teflon seal and range spring. The difference in pressure causes the sensor assembly to move in proportion to the change against a range spring.A rotary magnet, located in a separate body compartment and isolated from the acting pressures, is rotated by magnetic coupling as per the linear movement of the sensor assembly A pointer attached to the rotary magnet indicated differential pressure on the dial

• Material: ABS
• Voltage: 9 -12 V DC
• Color: White
• Operating Temperature: 20 to 80 deg C
• Wireless Frequency: 433 MHz

• Warranty: 3 years
• Feature: Ultra-compact size, Measures tensile and compressive forces.
• Weight: 0.015 Lb (0.007 Kg)

• Brand Name: Honeywell
• Type: Pressure Sensor
• Voltage (V): 3 V
• Operating Temperature (deg. Celsius): -40 - +85
• Package: 8-DIP
• Port Style: Barbed

• Brand Name: Lord
• Model Number: SG-LINK-200
• Sensor Input Channels: 3 Differential
• Sensor Excitation Output: Configurable 1.5 or 2.5 V (100 mA)
• Measurement Range: 0 to Excitation voltage (1.5 or 2.5 V)
• Adjustable Gain: 1 to 128
• ADC Resolution: 24 bit
• Noise: 1 pu Vp-p to 20 puVp-p
• Temperature Stability: 0.172 puV/ DegreeC (typical)

• Accuracy: 0.20 % FS
• Brand: Jupiter
• Part Number: P1200
• Suitable Media: Liquid
• Pressure Range: 75 psi to 10,000 psi
• Supply Voltage: 10-12 V
• Process Connection: Screw Terminals
• Operating Temperature: -20 to 80 Deg C
• Frequency response: 2.5 to 40 kHz
• Insulation Resistance: 500 M Ohm at 50 VDC
• Contact System Type: TPST

The newly developed conduit pressure sensor SPT-Si is specially designed for measuring small pipe  pressures from 0..10 mBar = 0.100 mmWk. Both air and fluid pressure are measured, relative to absolute pressure. The sensor is supplied with M12 or (Hirschmann) connector or wired cable. The silicon measuring brace is very accurate in the conversion of pressure to Volt or mA output,  standard accuracy ± 0.5% of the measuring range.

The PT460E Series transducer is a ±0.5% sensor ideal for melt pressure applications requiring simple installation, repeatability and reliability. The PT460E transducers provide the industry standard 3.33 mVV signal designed to work with most pressure indicators. The PT460E comes equipped with a six pin bendix connector. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT460E features a 12-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of other electrical connections if desired.

• Pressure Range: 0-3.5MPa--0-150MPa(0-500psi---0-30000psi)
• Over Pressure: 1.5 X FSO
• Max Diaphragm Temperature: 400oC

MA1200 Series Economic melt Pressure Transducer designed for economic applications. The model MA1200 and MA1300 are introduced with automatic zero adjustment. This series can be used together with the PVI Series Intelligent Digital Pressure Instrument of Omicron or other brand instrumentation. Zero & full span can be adjustable externally if required, with amplify signal can be connected with PLC. With the advantage of high precision and reliable pressure measuring and good quality, internal 80% calibration and etc.

Proffering the best quality of Gauge Pressure Sensors, we are one of the highly respected Wholesale Pressure Sensors Suppliers. Our Fiber Optic Pressure Sensors are well accepted in various countries like Canada, US etc.Pressure sensors (also disposable) for all pressure ranges, in various configurations and materials of constructions for numerous applications viz:- All types of medical equipment Process plants Automation Robotics Automobiles Nuclear Defense Space

• Feature: Operable after exposure to frozen conditions Choice of termination for gage sensors Calibrated null and span Temperature compensated Provides interchangeability

The factory calibrated 26PC Series miniature pressure sensors provide reliable gage pressure sensing performance in a compact package. The sensor features a proven sensing technology that utilizes a specialized piezoresistive micro-machined sensing element which allows part interchangeability, high performance, reliability, and accuracy. The low power, non-amplified, non-compensated Wheatstone bridge circuit design provides inherently stable mV outputs over 1.0 psi through 250 psi sensing ranges.

• Type: Pressure Sensors
• Application: Industrial Use
• Color: Black
• Condition: New
• Accuracy: Sensing Area 9.53mm
• Pressure Ranges: 9.53mm
• Cable Length: 25.4mm (1in)

• Feature: Low and High Level Output , All Welded Construction
• Applications: Hydraulic Pressure Monitoring , Torpedo Depth Sensing

P700 series pressure transducers are designed for high reliability and stability. The all welded construction incorporates a double cantilever beam with bonded foil strain gauges. Coupling to the pressure diaphragm via a force rod, gives excellent thermal isolation from the fluid or gas being measured. High overload protection is an integral part of the design. These units are capable of sensing extremely small changes of applied pressure and are relatively insensitive to vibration, altitude and shock.

• Features: Well equipped ,User-friendly ,Long lasting service life

• Voltage: 4……20 mA

Pressure Sensors Piezoelectric & Piezoresistive type, High temperature sensor, Pressure transmitters with 4��20 mA & Voltage output.

• Width: 55.9 mm
• Connector: 2-pin Male Square Pin
• Thickness: 0.203 mm
• Substrate: Polyester

• Brand Name: kartographers
• datalogger: pressure data logger
• sensor: wind sensor
• instruments analysis: current pressure monitoring

We are offeringpressure sensor. Range: 600 – 1100 hpa (17.70 – 32.50 in hg) accuracy: ±1.5 hpa over the full pressure range ±0.5 hpa over any 200 hpa range with offset correction ±0.35 hpa at 25°c resolution: 0.1 hpa operating temperature range: -40° to +55°c (-40° to +131°f) temperature compensated range: -40° to +55°c (-40° to +131°f) over pressure range: 10 to 10,000 hpa battery backup: 8hrs(only for sensors)

Smart sensors and transducers limited have launched strain gauge based digital pressure transducer . The product design features include stainless steel design. These are manufactured in four series viz. precision (p), general purpose (gp) and low cost (lc) depending on accuracies of 0.25 %, 0.5%, 1% respectively. Because of their stainless steel construction (including wetted parts), these sensors are industrially rugged and highly reliable. These units measure a range of pressure from -1 kgcm2 to 1000 kgcm2. Pressure transducer are available in four different accuracies with temperature ranges from 0 to 80 deg c. The compact size makes them light weight and adaptable to be accumulated in locations where space restrictions pose problem. Being strain gage based, they are suitable for dynamic pressure monitoring, in addition to the conventional static pressure monitoring. The pressure transducer have wide application in process industries such as chemical and petrochemical, food, fertilizers, steel and cement plants, flow measurements, depth sensing and level measurements.