Testing Equipment Dealers in Koldongri, Mumbai (213 products available)

We are offering rebuilt & computerized maag ph-40 gear lead & profile tester. Parameter value maximum gear diameter 400 mm minimum gear diameter 20 mm module range 0.5 – 15mm between center distance maximum 720 mm between center distance minimum 10 mm maximum lead inspection at 0° 150 mm maximum helix angle can be possible to check 45° vertical travel of probe slide 150 mm work load maximum 100 kg. Optical scale list count 2” machine power require single phase 220v machine net weight 800 kg. Machine gross weight 1000 kg. features:  fully reconditioned & all defective mechanical parts reworked or replaced  assured supply of complete spares & services for at least 10 years.  experienced & skilled service team for service & calibration.  machine will be proved with cnc machine calibrated master within +- 2 micron.  one year warranty for complete machine.  upgraded more than 300 machines all over india  gear analysis software is pentium iv & windows xp os compatible. Accessories:  hss lower center  30.000mm -01 qty  job holding carrier for 30.00mm center- 01qty.  hss stylus for lead & profile measurement  1.0mm , 2.0mm & 3.0mm – each 01 qty.

• 230 Volts ± 10%AC, 50 Hz single Phase.: 0-5kV AC, 50Hz.
• One knob manual control, continuously variable through torodial auto transformer.: 2-20-100 mA.
• 3 ranges: 0.1-2mA; 0.1-20mA; 0.1-100mA: Lamps to indicate ‘HV ON’, ‘FAIL’.
• Range: 0.1-5.00 kV Display: LED digital 3 digits Resolution: 0.01 kV Accuracy: ± 3% + 4 digits: Range: 0-2mA; 2-20mA and 20-100 mA Display: LED digital 3.5 digits Resolution: 2mA range: 1uA : 20mA range: 10uA : 100mA range: 100uA Accuracy: ± 3% + 4 digits
• Settable : Thumbwheel switch:1-99 seconds Display: LED Digital 2 digits, countdown. Resolution: 1 second Accuracy: ± 5%: HV switched ON by remote switch. Timer does not funciton in this mode.
• 15 minutes ON / 15 minutes OFF.: 38 x 28 x 19 cm;
• 15 kg: 43 x 33 x 24 cm;

Machine Feature • Digital readouts of test voltage, leakage current and time• Multi-range mA meter• Timer count-down digital display• Digital display to set trip current•‘HV ON’ and “FAIL’ indicators• Panel with legend for controls• Remote control tests via HV probe with switch• Rugged table top cabinet SafetyAll metal cabinetHigh quality double wound HV transformerGood quality components and hardwareExtra EARTH Post Provided Standard Accessories a) Mains cord 2 meter long: 1 Number.b) HV test leads 1 meter long: 1 Set.c) Remote HV test lead with switch: 1 Number.

5 ranges: 250/500/1k/2.5k/5k V DAR and PI calculation Includes leak current, voltage and temperature testing

• Type: Data Loggers
• Certification: NABL certified
• Application: Logging, Monitoring
• Display Type: Digital
• Power Source: Electric
• Warranty: 1Year
• Country of Origin: India
• Brand Name: Premier Electrosystems

* Directly logs data into pen drive * Upto 8 channels configurable * Directly view data in excel or notepad.   Input : Temperature, RH, Pressure, Vacuum, Voltage, Current, etc. - all standard inputs Resolution : 1/ 0.1/ 0.01/ 0.001 (As per requirement) Display : 2 rows of LED display Upper Display : Process Value Lower Display : Process Value/ Channel No/ Clock. Accuracy : ± 1 count RTC : In built Real time clock & calendar with battery backup of more than 2 years Log rate : Settable from 10 sec to 24 hrs Storage : Pen drive  

• Micro-controller operated: Front panel with legend
• Built-in printer: Can re call stored last 100 tests results
• Weight: 12 kg: Measuring range : 0 to 1999.9 μOhms
• Resolution: 0.1 μOhms: Test current: 100A DC & 200A DC
• Measurement accuracy: 0.5 Class: Display: LCD

We are offering amps fully automatic resitance tester, description: nmc hl-200 is a new generation, fully automatic, 4 terminal line loop contact resistance tester. The entire test is done automatically and quickly. Hl- 200 takes over; powers up the test current, takes the readings and displays the results on the lcd screen. Prints test results through its built-in printer. Test results can be saved in memory and can be recalled later. True portability is achieved by the lightweight (only 12 kg), single unit design housing the hl- 200. The hl- 200 is encased in an aluminum alloy cabinet. the advantages of hl-100 • automatic measure of contact resistance in 3 seconds • true 4 terminal measurement: high accuracy. No lead compensation required • test results saved automatically • recall and print last 100 test results • prints results on built-in printer applications: • measure rotating machine contact resistance • measure breaker element resistance • measure resistance of bus bar joints • locate poor connections principle: current of 200a dc is passed in the contact and voltage drop across the contacts is sensed, processed and the resistance is displayed on screen. Hl- 200 is micro controller operated user friendly, accurate, reliable, small, light weight and reliable tester. Hl- 200 incorporates a large lcd screen for display of menu and results. The results are printed on built-in printer. Hl- 200 incorporates breakthrough technology and design that gives accurate and reliable results, again and again. A true four terminal measurement is used to eliminate the n e e d f o r l e a d r e s I s t a n c e compensation.

• Type: Data Acquisition System
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 0-100W
• Driven Type: Electric

Features :  Complies with USP, IP specifications Single drive dual station unit Snap-Click™ loading and a swivel free basket movement Programmable Timer with alarm and Temperature controller External probe for beaker temperature validation Illuminated bath for better visibility

• Type: Gold Purity Testing Machine
• Brand Name: Maxsell
• Certification: BIS
• Weight: 30kgs
• Model Number: MGT KARAT PRO
• Place of Origin: India
• Detector: High Resolution Micro Processor based Hermetic Proportional Counter
• High Voltage: 4-50 KV - Auto variable type to increase Tube Life
• Accuracy: 0.1% (Under optimized test conditions with standard samples)
• Elements: Au, Ag, Pt, Cu, Ni, Zn, Pd, Cd, In
• Testing Time: 30 - 60 Secs (40 Secs for best results)
• Test Area: 1
• XRay tube: Triple Stage Cooling W-Target Xray Tube
• Power Supply: 110V to 260V, 50/60Hz
• Dimension (mm): 477(L)x386(W)x386(H)

Highly demanded in textile industry, the offered Sublimation Tester is manufactured using exceptional quality components and ultra-modern technology in strict adherence with market quality norms and policies. Moreover, checked on different parameters of quality, this sublimation tester is made available in a number of technical specifications for our patron to choose from. Clients can purchase this sublimation tester at highly competitive rates from us within the scheduled time span.

Our company is ranked amidst progressive distributors of the product in Mumbai(India) as well as varied other marketplaces. Our customer-centric approach while making online or offline procedures makes us a reliable name. We keep a close eye on the transactions made to keep all the information shared by the clients safe and confidential. This portable and compact instrument is for precise measurement of voltage and current. Range switch is provided for precise readings in low voltage & current ranges. Working Connect any power supply(maximum 200VDC @20Amps) to the POWER IN terminals and connect load at POWER OUT terminals. Read the readings of voltage & current drawing by the load and the mul

We Offer Battery Charge Monitor BCM-01 is a micro controller based unit, which is used for monitoring the charge level of stationary battery systems. This unit measures the voltage drop across a shunt through which the battery is connected to the charger and the load. The unit displays the charge remaining on the battery in terms of Ampere- Hour (AH) capacity as well as remaining time for which the battery can supply rated current. The unit incorporates precision analog and digital circuits and has the following features Feature Ø A settable low charge alarm Ø Display of the charge on the battery as AH and Remaining time for complete discharge. Ø Field Setting of the Rated battery capacity in AH. Ø Field setting of the shunt rating. Ø Remote Indication of fully charged Battery condition. Ø Soft calibration – no trimpots. Ø Optional- RS 485 Modbus link for PC connectivity. Ø Optional Ethernet connectivity for networking. Ø Operates directly from the battery being monitored. Ø User friendly LCD display messages. Ø Field setting of Battery efficiency.

Motion Sensor for Car Parking Lot, Garage, Basement & Store rooms. HF 3360 [Ceiling Mount Ultrasonic Motion Sensor] Type : - 360° Ultrasonic Motion Sensor Application : - Car Parking Lot and Garage Technology : - High Frequency / Ultrasonic Ceiling mount motion sensor Reach : - 1 - 8 meters variable range setting Time Setting : - 5 Sec - 15 Minutes Lux setting facility : - 2-2000 Lux Load switching : - 1000 W uncorrected inductive loads like fluorescent lamps/tubes with electronic ballasts - 230V AC 50 Hz. http://www.occupancysensor-motionsensorlights.com/car-parking-areas.php

• Application: Household, Industrial
• Weight: 50-80 gm
• Warranty: 1 Year
• Size: 5-6 Inch
• Thickness: 2 mm
• Production Type: Automatic

Three-phase four-wire multi-function electronic meter is a fully programmable and very powerful meter that can satisfy your most demanding request. It can provide you with extra function of reactive energy measurement, instant variable of current and voltage for each phase and load profile. The accuracy for active energy measurement can be 0.5s. Its reliable performance under heave load and high harmonic conditions make it a superb choice for the gate of power station or large power consumer. It complies with IEC 62053-11. 

The friction tester is primarly designed to determine the Co-Efficient of Friction of Plastic films, sheets, laminate, pipes and paper etc. The equipment provides the measurement of static and kinetic co-efficient of friction. The apparatus conforms to BS 2782 and ASTM D-1894 and other equivalent standards.Measurement of frictinal properites may be made on a film or sheeting specimen when sliding over itself of over another substance. The co-efficient of friction arer related to the slip properties of plastic films that are of wide interestin packaging application.These methods yield empirical data for control purposes in film production.Correlation of test results with actual performance can usually be established.

Lightweight and completely self contained, the easy to use Model 4180 ELF Meter is ideal for commercial or laboratory use. The Model 4180 accurately measures Extremely Low Frequency Magnetic Fields generated by electrical equipment. Applications include detecting magnetic field emissions from a wide variety of sources, including video display terminals, AC power lines, office equipment, household appliances, and all types of electronic equipment. Key features include Min./Max./Peak Hold, Auto Range, and user may select Gauss or Tesla Readings. The 4180 Series Hand-Held Gaussmeter's built-in software eliminates the need for complex calibration procedures.

• Brand Name: Ultra-Shine

We are offering gold loss controller, itâ��s an electromagnetic field emitter which emits electromagnetic field of various different frequencies. This field excites the metal particles (platinum, gold, palladium, silver, copper, zinc) present in the atmosphere and forces them to settle down on the ground floor. Thus you can also recover your metal particles which you lose in atmosphere while filling and polishing it. How it is used? just connect the plug in a socket and place the machine in your filling, polishing and buffing department. Now start the normal manufacturing process. key features: * settles down all the precious metallic dust from the atmosphere. Ï� (platinum, gold, palladium, silver, copper, zinc) ï� * helps in reducing refinery work. Ï� * no other consumables required. Ï� * long life of the machine. Ï� * cost effective. Ï� * unlimited technical support at no extra charge. Ï� * no minimum orders. * ï� prompt courteous service.

We are strongly backed by a smart logistics network owing to which we are capable to deliver the product range in safe and timely manner. Ours is a well-recognized organization based in Mumbai(India) and appreciated for offering products in the local markets.

Utility: It is designed to meet standard norms and specification generally followed in industry. It is ideal for checking fastness of coloured Textile samples to washing, dry cleaning and chlorinated water. Machine is compact floor model electrically heated water bath. MOC: SS 304 / 316 With Electronic Programmer

We offer Flow Meters. Kent Oil Meters are accurate, reliable and economical way of obtaining all the information a user needs to control oil consumption in Generators, Boilers and to measure exact oil receipts. Wherever oil is received, stored and used, Kent Oil Meters measure, totalise and records flows precisely. Kent oil meters can be installed in the pipeline and would totalise the flow of oil flowing through the line.

Our climatic chambers provide excellent temperature and lighting control for regulated growth of plants and other products. Its responsive humidification sensor and energy efficient design make it a preferred choice for a wide range of applications. Basic specification : capacity: 150 l temperature range: 5-50°c (light off), 10-50°c (light on) temperature accuracy: ±0.5°c temperature uniformity: ±2°c temperature fluctuation: ±2°c

• Brand Name: PRAPAN
• Automation Grade: Automatic
• Power Source: Electric
• Usage/Application: Tyre Bead Wire Testing Chamber
• Material: AISI 304
• Phase: 1 Phase / 3 Phase 

We are renowned Manufacturers and Suppliers of Box Compression Tester. Our Box Compression Tester measures the compression strength of the corrugated box. The system is made of a set of plates one is attached to the load measuring arrangement and the other is movable plate which is move with the help of motor, gearbox, and screw and nut arrangement, the movable plate have the facility of over travel and under travel. The load measuring arrangement is digital type. The box of which the compression strength is to be determined is placed on the lower plate, due to the motion of the movable plate the box is compressed and the compression load is directly read out on the digital indicator on the panel. The deflection of the box also measured with the help of the digital deflection indicator. The instrument is made in two parts, one is for main instrument and the other is the control panel. The ultimate test is to determining overall quality and performance of the container. The instrument is bright chrome plating, zinc plating, painted in metallic. Features High end designingRobust constructionEasy to operateInnovative technology