Automatic Flute Laminating Machine Dealers

Three-way of top sheet loading Pre- stacking loading: for sheet uneven stacking or with static electricity, manual pre-stacking on pre-loading platform, and keep the job-change over within 3mins. Whole pallet loading: adopt the whole pallet loading design to save the manpower and time. After the pallet is loaded against the gear gauge, aligning the zero position to make left and right adjustment Separate manual stacking: when the platform descend, manual stack the paper on the pallet. Feeding lifting pile plate the lifting platform is controlled by 4 sets of double chains to ensure the smooth and safety operation. 10 limits and protective sensors, real-time detection and adjustment to ensure safety production. Industry Initiative of servo control lifting platform, single sheet lifting same as offset printing press, without wear, and can be set as from 1~50 sheet/lifting. High speed shaft-less feeder Industry Initiative of high speed shaft-less feeder, smooth feeding, maintenance-free, max speed up to 22,000sheet/hour. The correction system of paper feeding ensure the high speed feeding smoothly without any skew. The sheet delivery stopper make sure the single sheet feeding, optional to upgrade by adding double sheet detection system. Becker vacuum pump with large suction, strong blowing, good stability and durable.  Conveyor part Belt length can be adjusted automatically to fit with different size of products. thickened sponge carpet to avoid crack at top edge of board. Standard with 6m length of enhanced conveying part (optional shorten to 5m).

Semi Auto flute laminator is suitable for pasting of paper board with paper board of 300 gsm & pasting of paper board of 150-600 gsm with two ply corrugated paper of ABCDE flutes. Features : Semi-Automatic Flute Laminator uses vacuum-sucking paper conveying type for the bottom paper and top paper is fed manually by hand while the operator is standing at the side of the machine. This type of design has the features of easy operation and maintenance. The core designed rubber roller together with knurled steel roller enhances the evenness of gluing, strength of stickness as well as lowering the production cost. Balance-tested rollers, tight assembling technique makes the machine runs quite stable. The machine adopts automatic glue supply and recyclable glue circulating system. Top or bottom sheet detectors are installed on the machine and the machines will automatically stop while shortage of sheets-either top or bottom one is detected. All materials are inspected according to ISO-9001 standard and the key parts such as gear and bearing are imported. The bottom sheet for this machine can be A, B, C, D, E, F flute corrugated sheet. It can do 3 to 5 ply board to sheet lamination or board to board lamination. The range for top paper can be 150-600 GSM.

Fully Automatic Flute Laminating Machine that we offer is used for pasting of corrugated liner with craft paper. It is developed using premium raw material and cutting-edge technology by our deft professionals. Our Fully Automatic Flute Laminating Machine is stringently tested on various quality parameters. We are one of the prominent Manufacturers and Suppliers of Flute Laminating Machine. It  can be obtained from us at a very reasonable price.   Features : Superior performance Durable finish standards High efficiency Longer service life

SPECIFICATIONS Tumup bridge plate is convenient for cleaning, discontinuos wate-circulating system ensures washing cleam. Automatic feeding for bottom sheet manual feeding fortop sheet (feeding from side for top sheet is optional) manual feeding fortop sheet (feeding from side for top sheet is optional) Flexible font register, bottom sheet is not exceeding the top sheet and itis adjustable for the front and rear lamination between bottom sheet and top sheet. Bottom sheet can be paperboard more than 350 gsm, A/B/C/D/E/F corrugated cardboard. Lnedilligent control and compacted energysaving and controlling play from the stack of paper Using height-precision plastic block device sace glue

The company is a prominent Semi Automatic Flute Laminating Machine Exporter, Importer, and Supplier in India. TMB-C Series Semi Automatic Flute Laminating Machine uses vacuum-sucking paper conveying type for the bottom paper and top paper is fed manually by hand while the operator is standing at the side of the machine. This type of design of our Semi Automatic Flute Laminating Machine is labor effective with low purchasing and production cost, easy to operate and maintenance. Description The core designed rubber roller together with knurled steel roller enhances the evenness of gluing, strength of stickiness, as well as lowering the production costBalance-tested rollers, tight assembling technique makes the machine runs quite stableThe machine adopts automatic glue supply and recyclable glue circulating systemTop or bottom sheet detectors are installed on the machine and the machines will automatically stop while shortage of sheets-either top or bottom one is detected. The electric parts used are all worldwide available brand or well-known Chinese brandAll material bought from outside are inspected according to ISO-9001 standard and the key parts such as bearings are imported onesThe bottom sheet for this machine can be A, B, C, D, E, F flute corrugated sheet. It can do3 or 5 ply board to sheet lamination or board to board lamination. The range for top paper can be 150-600 GSM with top paper advance or alignment functionCE certificate availableGluing even : 30-50gsm. Quite cost effective for your production

Bottom Paper Vacuum Feeding/ Manual Feeding Electric Control Positioning of Bottom Paper Panel Flexible Positioning of the Front Facet Automatic and Recyclable Glue Application System High Speed (50-80 Metre/min) Custom made as per required Corrugated Paperboard or Sheet size.

Normal front feeding of top sheet designed to make the feeding more convenient and lamination more accurate.With flexible front positioning which avoid bottom sheet exceeding the top sheet and adjustable fore-and-left lamination between bottom sheet and top sheet.Suitable for lamination of paper board to bottom paper board above 300 gm and to ABCDE flute corrugated cardboard, and corrugated cardboard to corrugated cardboard.

General features 1. This semi-auto laminator uses is the body paper attracts the floating type to deliver the paper, the surface paper delivers the paper artificially, the ease of operation, the transportation is accurate. The body paper dough making paper uses the photoelectric control, before the special, gauge localization, the localization is accurate, before the body paper does not surpass. 2. This machine press fits uses hangs aerosol press fits. Causes in the cardboard movement the stress to be even, the transportation is steady, production cardboard smooth artistic, the compression shell may the shuttle, suit many kinds of specifications the cardboard productions. 3. The entire machine major component uses the domestic and foreign well-known factories the original installation product, the life is long, the stability is good.

Performance: 1. Unique front lay with intelligent control system, ensuring accurate registration of laminating. 2. Imported electric components with high quality and almost trouble-free. the machine adopts frequency converter for speed regulating, PLC control and analog-to-digital conversion to guarantee the running precision. 3. A pre-feeding device is provided to feeder, cutting time of stopping machine and improving production efficiency. 4. Suction belts for bottom sheet feeding ensure smooth and continuous delivering. 5. Main motor and feeder adopt double frequency converter for speed regulating and centralized control, which enables sychron lamination. 6. Integrating mechanical and electrical with air, the machine is convenient to operate and adjust. Parameters: Model: CM1300 Max. Size(W×L): 1300×1300mm Min. size(W×L): 420×420mm Suitable paper: Top sheet 200-600gsm, Card Bottom+250gsm, ABCDEF Flute Max.Speed: 100s/min Total power: 15kw Overall dimensions: 14000×2300×2700mm

The company is a prominent Supplier, Exporter and Importer of Semi Automatic Flute Laminating Machine. The range of Semi Automatic Flute Laminating Machine made available by us is designed as per the requirements of various industrial applications. We make Semi Automatic Flute Laminating Machine available at the best prices in the market. This range of Semi Automatic Flute Laminating Machine is dimensionally accurate and appreciated for its sturdy construction.

Suitable for Offset printed board to 2 ply 4 ply pasting. High performance work horse Capable of around the clock productivity. More than 100 installations across India. Several multiple machine users Can also be put to use for board to board pasting..

Automatic flute lamination machine can give fast better result with high quality of boards of duplex boxes and kraft boxes wiyh high speed production capacity.

Semi-Automatic Flute Laminator HII (High Stacking Model) designed for high speed & Mass production for 03 Ply carton board with precision Upto 1 mm and productivity of ~ 3000 Boxes/hour: Top Paper Stacking: Stacking of Paper Upto 1.5 meter for non-stop production. Lamination Process: Top paper manual feeding and Servo motor driven flute Paper feeding. Glue Settings: Anilox Technology glue application roller for unique glue application. Pressing Zone: Semi-Auto Pressure setting for 03 ply board in pressing Zone. User friendly: Very easy to operate and use.

The company stands tall among the reliable Manufacturers, Exporters and Suppliers of Semi Automatic Flute Laminating Machine. The Laminating Machines we make available are accredited for their long functional life, reliable performance and easy maintenance. Courtesy our brilliant logistics network, we are capable of delivering bulk orders of the machines within the stipulated timeframe.   Main Chracteristics : Tumup bridge plate is convenient for cleaning,discontinuous wate-circulating system ensures washing cleam. Automatic feeding for bottom sheet,manual feeding fortop sheet (feeding fom side for top sheet is optional). Flexible font register,bottom sheet is not exceeding the top sheet ,and it's adjustable for the front-and-rear lamination between ottom sheeet and top sheet. Bottom sheet can be paperboard more than 350gsm,A/B/C/D/E/F corrugated cardboard. Lnedlligemt control and compacted energysaving and controlling play from the stack of paper.  Using hight-precision plastic block device,sace glue.

Automatic feeding bottom paper, frontage pushing face paper, feeding paper fast and lower work intensity. Localization bottom never go beyond, suitable for laminating the paperboard together and for laminating the 2.paperboard with the A/B/C/D/E corrugated cardboard together. 3.Bottom paper and face paper can fore-and-art adjustment, easy to laminate together. 4.Feeding glue system are automatically controlled by liquid relay, thickness of glue can adjust. Gluing uniformity, lower glue cost. 5.Control panel, electromagnetism clutch without touch point relay, position is monitored by photoelectric switch, digital automatic counter. 6.High precision laminate, the finished products are of smooth surface edge and of high intensity. Whole structure is compact, with beautiful appearances and high work efficiency.

FLUTE LAMINATOR SEMI AUTOMATIC, Die Punching Machine

Automatic Flute Laminating Machine, Edge Squaring Machin