Industrial Valve Dealers in Vatva, Ahmedabad

(380 products available)
  • Premium
    PFA - FEP Lined Butterfly Valve

    PFA - FEP Lined Butterfly Valve

    Get Price Quote

    • MOQ100 Pieces
    • MaterialPFA - FEP
    • ApplicationWater Fitting
    • FeatureDurable, Good Quality
    • PressureMedium Pressure
    • Pack TypeCarton Box
    ...more
    www
  • Premium
    Non Rising Spindle Gate Sluice Valve

    Non Rising Spindle Gate Sluice Valve

    30,000 / Piece

    • MOQ1 Piece
    • MaterialCast Iron
    • ApplicationIndustrial
    • FeatureCasting Approved, Good Quality
    • Country of OriginIndia
    • Diameter200-250 Mm
    ...more
    www
  • Premium
    Venturi Ball Float Steam Traps

    Venturi Ball Float Steam Traps

    5,000 - 20,000 / piece

    • MOQ1 Piece
    • Country of OriginIndia
    • Size1.1/2inch,1.1/4inch,1/2inch,1inch,2inch,3/4inch
    • Number Of FlowerSteam Traps
    • Brand NameIEPL
    • MaterialStainless Steel,IEPL
    • CertificationIEPL
    • ApplicationWater Fitting
    • Packaging TypeWater Fitting
    • FeatureCasting Approved,Corrosion Proof,Investment Casting
    • ConditionNew
    • PressureHigh,Medium
    • End ConnectionScrewed
    • Number Of WayScrewed
    • IEPL Steam Traps come standard with our 10 year performance guarantee against orifice erosion and steam wastage . See below the smooth steam flow in IEPL Steam trap compare to other mechanical steam trap.   Due to the traps unique orifice design there is TRUE continuous condensate discharge without any open/close cycles rather than intermittent discharge unlike traditional mechanical type steam traps.  It is important to know that acceptable loss from 50 Rectus steam traps is LESS than that of 1 failed open mechanical type steam trap. And CO2emissions are reduced through reducing steam consumption and boiler fuel usage by up to 20%. Benefits   No moving parts No spare parts required Permanently eliminate the need for steam trap surveys & repairing cost. Environmentally Friendly Save water Save water treatment chemicals Save electricity Handles varying or constant loads Easily handles water hammer  Automatic air venting at start-up Perfect operation in vertical or horizontal installation.
    ...more
    www
  • Premium
    Self Cleaning Rotary Airlock Valve

    Self Cleaning Rotary Airlock Valve

    24,000 - 35,000 / Piece

    • MOQ1 Piece
    • Brand NameJALDHARA,Jaldhara
    • MaterialMild Steel, Carbon Steel
    • PowerManual
    • PressureMedium
    • ApplicationIndustrial
    • Country of Origin440v
    • Number Of FlowerRotary Airlock Valve
    • StructureDouble Half Shaft
    • Country of OriginIndia
    • MediaAir
    • SurfacePolished
    • Pack TypeCarton Box
    • Warranty1 year
    • We are betrothed in offering an excellent quality Self Cleaning Rotary Airlock Valves. These valves are used for feeding material into a pneumatic conveying system. The provided valves are manufactured in strict adherence with predefined quality standards using optimal quality components and latest techniques. Furthermore, offered Self Cleaning Rotary Airlock Valves are available in diverse specifications at reasonable rates.Features: Optimum performance Low maintenance Tough construction Easy to install
    ...more
    www
  • Knife Edge Gate Valves

    Knife Edge Gate Valves

    Get Price Quote

    • TypeGate Valve
    • ApplicationFluid Flow Control In Industrial Applications
    • Media HandlingSlurry, Viscous Fluids, Challenging Substances
    • We are leading Knife Edge Gate Valves Manufacturer in India. Knife Edge Gate Valves are vital components in different industrial applications, providing accurate and reliable control over fluid flow. This Knife Edge Gate Valves are designed to handle difficult to manage media like slurry, viscous fluids and other challenging substances often encountered in industries such as wastewater treatment mining, pulp and paper, power generation. The main feature of a Knife Edge Gate Valve is its sharp-edged-gate, which can cut through solid and offer a tight seal, ensuring optimal performance and longevity.
    ...more
  • Green Foot Valves

    Green Foot Valves

    Get Price Quote

    Green foot valve is true friend of your pump. Foot - Valve is generally placed at the bottom of the suction pipe of centrifugal pump to prevent the suction pipe from emptying while pump set is at rest. It,s high quality PVC washer is durable for long time because of perfect water resistant. When the pump is started because of foot valve the Suction pipe is not to be re primed thereby instant flow of water is possible which alienate the most of burden of pump from uplifting the water or any fluid. Foot valve also prevents the entrance of detrimental solid materials into the pump.   SIZE 15mm to 155mm.
    ...more
  • Nrv Valve

    Nrv Valve

    Get Price Quote

    • Size range15mm to 150mm.
    • DrillingAs per all internationally accepted standards, such as BS, DIN, ASA 150 etc
    • Hydrostatic TestAt 10 kg/Sq.cm.g for Body and Seat.
    • Free Floating Ball Allows maximum flow through valve. The only moving part is the ball, so maintenance is reduced/nil. The solid polypropylene/PVDF ball seated on elastomers seat gives no chance for leakage. Ball fully supported by guide ribs for ful flow and maximum turbulence. Available with various elastomers seats like Neoprene, Hyplon, EPDM, Viton for compatibility with different chemicals. Tight shut-off achieved at a minimum of 1 Meter water. Available in screwed end connections also.
    ...more
  • Industrial Valves

    Industrial Valves

    Get Price Quote

    We specialize in manufacturing industrial valves that are widely used in different Industries-Chemical, Pharmaceuticals, Petrochemicals, Fertilizers, Power Plants, Process Housed, etc. Our comprehensive range of valves are available in variety of Types, Sizes, MOC  to suit the varying needs of the clients. We manufacture Ball Valves, Globe Valves, Check Vlves, Gate Valves, Butter Fly Valves, Flush Bottom Tank Valves. Apart form conventional valves we also cattered client''s special applications. Since more then 25 years in the field, we have come accross diverse applications of the clients and having exhaustive expertise for manufacture valves for Severe conditions. We manufctured valves for High Vacuum-High Temperature applications, Highly Alkaline-Na-Flacks at high temperature which is very corrosive innature, Hydrogen gas at high temperature application, High abrassive sand slurries with steam for cement applications, Valves for chlorine gas. We have supplied valves for maitenence, Project, Export and expansion work. Our valves are inspected by inspection agencies like-M/s. Tata Projects/M/s.UHDE India/M/s.P&DIL Etc. We manufacture valves under different quality plan levels-Level-00 - Level-05 to balance price and client''s required quality standards. Each and every valve is tested and inspected as per our standards-incorporated to the national or international standards-prior to despatch. All our valve are facotry certified and guaranteed in complience to the specifications agreed with the clients. We have exhaustive working experience with High alloys such as Alloy-20/Hestalloy-B,C or D, Al-Ni-Bronze etc. Our valves are designed and manufactured under experienced and qualified Chemical Engineer-have come across many processes and applications. Our all documents are in accorence with international norms and standards for inspection, approval and testings.
    ...more
  • Electrically Actuated Ball Valve

    Electrically Actuated Ball Valve

    Get Price Quote

    • MaterialCarbon Steeel
    • ApplicationElectrically Use
    • Automatic GradeManual
    • PressureHigh Pressure, Low Pressure, Medium Pressure
    • FeatureCasting Approved, Durable
    • Number Of Way2way
    • Electrically Actuated Ball Valve that we offer is manufactured using high-grade metal and other raw material to ensure supreme quality. Our Ball Valve is available in different sizes, grades and other technical specifications. We provide Ball Valve that is known for sturdy construction and high-strength. We can provide Electrically Actuated Ball Valve in both small and bulk quantities to according to the requirement of buyers.
    ...more
  • Non Return Valve Flange End

    Non Return Valve Flange End

    Get Price Quote

    • MaterialPolypropylene (PP)
    • DesignNut – Bolt Type / Solid Type
    • Max Working TemperatureUp to 80oC
    • Connection EndFlange End / Screw End
    • Test Pressurekg/cm2
    • One of the finest companies of the industry engaged in the manufacturing of NRV of best quality is ENGLISH AGRO. The Company is serving the industry for many years and emerged as one of the best in Class Company. High quality raw material along with ultra-modern technology is used by the experts of this company for the manufacturing of Non Return Valve Flange End. NRV is completely made of polypropylene. It is used in commercial as well as for irrigation purpose. Where the delivery pressure is high (i.e. more than 20 meters) it is recommended to install a Non Return Valve in the discharge Line. The Flange End NRV should be placed near the pump to protect the pump from excessive back pressure to prevent the water running back through the pump in case sudden failure of prime movers. SIZE AVAILABLE 2”, 2½” , 3”, 4” COLOR AVAILABLE BLACK      
    ...more
  • Stainless Steel Rotary Airlock Valve +3

    Stainless Steel Rotary Airlock Valve

    50,000 / piece

    • MOQ1 piece
    • MaterialStainless Steel
    • Country of OriginIndia
    • ApplicationIndustrial
    • Valve Size6 Inch
    • Diameter150 mm
    • Automation GradeAutomatic
    • Lifting CapacityRotary Airlock Valve
    •  An airlock rotary valve, also known simply as a rotary airlock or rotary valve, is a crucial component in various industrial processes, particularly for handling powders, granules, and other bulk materials. It plays a key role in controlling the flow of material while maintaining the integrity of the air pressure within the system. Here’s a detailed look at its function and features: How It Works: Design: The rotary valve typically consists of a cylindrical housing with a rotor inside that has multiple vanes or blades. The rotor is connected to a motor that rotates it within the housing. Operation: As the rotor turns, material enters the inlet of the valve, is trapped between the vanes, and is then carried through the valve to the outlet. This rotation helps maintain a controlled and steady flow of material while minimizing air leakage.
    ...more
  • T Type Strainer

    T Type Strainer

    100 - 500 / Piece

    • Number Of FlowerT Type
    • Filter Body MOCCI, CS, SS304, SS316, CS+PFA lined, SS316+ PFA lined
    • Filter MediaMetal Wire mesh, Perforation
    • SizeBased on Pipe line sizes
    • Micron Rating5mesh,10 Mesh, 20 Mesh, 40 Mesh, 60 Mesh, 100 Mesh
    • Simply stated, a strainer is also a filter; however, it uses a perforated plate or screen mesh to remove larger particles from a process stream.   The major advantage of a Strainer is that it is reusable. With reasonably lower capital &operational cost.   There are three levels of strainers-coarse, medium & fine.   Features & Benefits Superior flushing capabilities, thanks to inherent built-in blow-down ports. Quick opening style covers. Better value for money with initial costs. Higher flow capacity despite smaller open ratio areas, thanks to a straighter flow path, Greater levels of flexibility. Chamber covers can be opened without process fluid draining out whilst installed horizontally. This is beneficial in more hazardous processes. Better suited to transferring fluids at higher velocities. Ideal for larger pipeline applications which require quick access to the strainer.   Application Pump protection Raw Material transfer Cooling tower water filter
    ...more
  • Non Return Valves

    Non Return Valves

    Get Price Quote

    • Item CodeNRV-1111
    • FeaturesHigh reliability and easy maintenance
  • Weir Type Diaphragm Valve

    Weir Type Diaphragm Valve

    Get Price Quote

    We are offering weir type diaphragm valve. Technical specification design standard : bs en 13397:2002 (formerly bs 5156) face to face : bs 2080, din 3202, mssp 88, en 558 flange : as per ansi b16.5 b16.42 drilling : asa #150 din 263233 bs 10 table d, e, f lining thickness : 3 to 5 mm testing standard : bs en 12266-1&2 (2003)
    ...more
  • Tee Type Strainer

    Tee Type Strainer

    Get Price Quote

    These Types of strainers are named after their shape and normally used for course filtration. But with large filtration area can be used with fine mesh also. Tee strainer is fabricated from pipes & plates or standard equal tee & flange. Filter elements are made of stainless steel perforated sheet or wire mesh supported by perforated sheet. In tee type strainer many times a structural skeleton made of flats and round bar is used to support the wire mesh. Features: Effective High performance Cost effective
    ...more
  • Rotary Valve

    Rotary Valve

    Get Price Quote

    • Available in Inlet Size6
    • Rotor SpeedMax 25 rpm
    • rotary valves feeders are placed under the hoppers or bins to arrange for uniform feed of material to the conveying equipment. Basically it is a volumetric feeding device which helps in applications where the flow rate of the solids needs to be controlled. They can be designed to have approximately 85% volumetric efficiency. Its features are ; body: manufactures out of ms ci accurately machined to required tolerance rotor: manufactured out of alloy steel shaft with rotor blades welded to the shaft rotor tips can also be provided with rubber, nylon, uhmw material bearings: anti-friction bearings with sufficient radial load rating, of reputed make
    ...more
  • Gate Valve +2

    Gate Valve

    Get Price Quote

    • Size1" TO 24"
    • MOCCAST STEEL
    • CLASS150#, 300#, 600#
    • we manufacturing cast steel gate valves upto 24" & upto 600# valves 
  • Gas Solenoid Valve

    Gas Solenoid Valve

    Get Price Quote

    • MaterialCast Iron
    • Country of OriginMade in India
    • FeaturesSturdy deign, Easy installation, Durability
    • Packaging TypeBox
    • Surface FinishColor Coated
    • Usage/ApplicationIndustrial
    • PressureLow Pressure
    ...more
  • Oxygen Cylinder Valve

    Oxygen Cylinder Valve

    470 / Piece

    • Number Of FlowerOxygen Cylinder Valve
    • MaterialBrass
    • FeatureFine Polishing
    • ConditionNew
    • Brand NameIndofab
    • Oxygen Cylinder Valve  
  • PP Tank Valves

    PP Tank Valves

    400 / Piece

    • Size1/2-2 Inch
    • MaterialPolypropylene and Brass
    • UsageStorage Tank
  • Cast Iron Rotary Air Lock Valve +4

    Cast Iron Rotary Air Lock Valve

    40,000 / Piece

    • MOQ1 Piece
    • MaterialCast Iron
    • PowerHydraulic
    • ApplicationIndustrial Use
    • Country of OriginIndia
    • Diameter150 mm
    • Valve Size4 to 16 inch
    • Warranty1 Year
    ...more
  • Pressure Gauge Cock Valve

    Pressure Gauge Cock Valve

    Get Price Quote

    Pressure k   x Close Riding on unimaginable volumes of streamlined smoothness, we are putting forth a magnificent extend of Plastic Pressure Gauge Cock. Being a quality-arranged association, we guarantee our customers that these items are the best in quality. Our talented experts just use fine quality crude material, while assembling the whole range. Also, our offered extent might be benefitted in an extensive variety of sizes and shapes, according to the necessities of our regarded customers.Features:» Rust proof» Enhanced durability» Compact design
    ...more
  • Solenoid Valve

    Solenoid Valve

    Get Price Quote

    • MOQ1 unit
    • MaterialAluminium
    • Model NumberVC- B2
    • Brand NameJANATICS PNEUMATIC
    • ApplicationAir
    • Country of OriginAC 220 V
    • Current5.0 VA
    • Pressure0 TO 10 BAR
    • Valve Size1/4"inch
    ...more
  • Rotary Air Lock Valve

    Rotary Air Lock Valve

    Get Price Quote

    Rotary valves are useful as one important integral part in material handling system. Rotary airlock valves have a wide application in industry wherever dry free-flowing powders are used. They separate air out of material and transfer the material to equipment in its sequence. Mostly materials are cement, minerals, grains, dust, fly ash, powders, and pharmaceuticals.  
    ...more
  • Manual Multi Port Valve

    Manual Multi Port Valve

    Get Price Quote

            Multi Port Valve (Manual)           Inlet - Outlet - Drain in one line Glass fill polyamide constructions Union made end connections Max. flow rate - 2.5 m3/hr   25 NB     Front Facing Inlet from left, outlet from right Side mount option available Union made end connections Max. flow rate - 5.0 m3/hr   40 NB   Front Facint Inlet from left, outlet from right Inlet and out let in one line True union with integral threading Max. flow rate - 12.0 m3/hr       65 NB Union end or MS Flange end Glass fill polyamide construction Max. flow - 35 m3/hr   DISTRIBUTION SYSTEM   Seven Seas Solutions (SSS) distribution systems are suitable for any make FRP or Poly Glass Tanks / Vessels various diameter tanks from 8" to 89".  These system can be used for standard opening 2.5" & 4" threaded and 6" flanged connection and with only top or top and bottom connections.    
    ...more
  • Needle Valve

    Needle Valve

    Get Price Quote

    • MaterialSS 304, SS 316, SS 304L, SS 316L
    • Pressure0 to 6000 psi
    • Ball Dia.¼” – 2”
    • TemperatureUp to 210°C
    • Using the ability of making innovation in product, we are also manufacturing a wide array of SS Needle Valve. Our complete range is fabricated as per international norms and designs. We are offering them in different sizes as per capacities. They are light weighted and owing this, they can be used in different pipe and fitting works easily. As current technology changes, we are also making all necessary changes so that they comply with customer’s specific need. Entire body & its every small part are tested at various parameters to ensure its quality and this test is done by our experts using ultra-modern technology. It is used to regulate low flow rates. It has a port and a threaded, needle shaped plunger. It finds applications in flow metering applications.   Specialization   High tensile strength Leak free control operation Available in different sizes with customized solutions No need of maintenance
    ...more
  • PVC Ball Valve

    PVC Ball Valve

    15 / Piece

    • MOQ240 Piece
    • MaterialPvc
    • Size1/2" to 4
    • PressureHigh Pressure
    • Number Of FlowerSolid Ball Valve
    • MediaWater
    • Usage/ApplicationWater
    • Model Name/NumberPPUPVC
    • Connector TypeThreaded
    • Valve Size1/2" (15mm) to 4" (100mm)
    • BrandFreedom
    • PackageBox Packing
    ...more
  • Valves Steam Accesries

    Valves Steam Accesries

    Get Price Quote

    - Zero leak - Low pressure drop valves for Steam/Thermic fluid application for isolation purpose- IBR approved - Environmental friendly - Maintenance free 
  • Rotary Valves

    Rotary Valves

    35,000 - 36,000 / Piece

    • Number Of FlowerRotary Valves
    • MaterialMild Steel, Pvc, Upvc
    • ApplicationIndustrial
    • Country of Origin110v, 220v, 330v
    • PowerHydraulic, Manual
    • PressureHigh, Low, Medium
    • FeaturesExcellent Quality Long Life,High accuracy, Durable, High Strength,Energy
    ...more
  • Lined Swing Check Valve

    Lined Swing Check Valve

    2,500 / Piece

    • MOQ10 Piece
    • MaterialPTFE
    • PressureHigh Pressure
    • ApplicationIndustrial
    • Size5 Inch
    • Country of OriginIndia
    ...more
Filter by Locality
top