Tray Dryer Dealers in Ahmedabad

Our clients can avail from us a comprehensive range of Tray Dryers. These Tray Dryers are highly functional equipment, used in number of industries for their energy efficiency and durability. Our Tray Dryers offer maximum output of heating the elements at required temperature. Our range Tray Dryer is also acknowledged for being environment-friendly.

Uni-Mech Tray Dryer is an enclosed insulated chamber in which trays are placed in trolleys. Fresh air and re-circulated air is heated by Heating Elements and is re¬circulated in chamber resulting in heat transfers in materials. Uniform air circulation, controlled temperature, sturdy construction and large working space are the valuable features of the oven. TRAY DRYER is especially designed for Pharmaceutical, Food& Bakery, Chemical and Dyes & Intermediates. Uni-Mech Tray Dyers are manufactured from materials like Mild Steel, Different grades of Stainless Steel. (cGMP Model is available) Tray Dryers are operated by Steam, electrical heater, thermic oil or hot air.

EXTERNAL: 2MM THKINTERNAL: 2MM THKMOC: cGMP SURFACE FINISH: EXTERNAL: Buffed to matt finishINTERNAL: Buffed to mirror finish. INLET & OUTLET: All dryers have a 5 micron pre filter r at the inlet and a manually infinite adjustable damper at the outlet. DOOR: Doors at provided at the front and / or rear side of the dryer. Door lips are lined with silicon rubber gasket to prevent any leakages. Suitable locking is provided for the doors.   HEATING: Dryers are normally supplied with either steam/ electric/ thermic fluid / hot water heating system. Suitable heating coils / caloriefiers / controlling unit are provided in the dryers.   TEMPERATURE CONTROL: Temp control system is done by electronic digital temp controller fitted in the control panel. The temp control in the dryer is fully automatic.   TRAYS: Trays are available in S.S. 304/ 316 q. All trays are fully die pressed and with coved corners. Trays are buffed to mirror finish. Trays are also available in aluminum / Polypropylene / FRP / M.S. galvanized as per clients requirements.   TROLLEY: Trolley is provided in the dryers to accommodate trays in it. Trolley trucks are used to load and unload the trays into the dryer.   CONTROL PANEL: Automatic Control panel is fitted on the side of the dryer. If consists of Starters, contactors, safety relays, CKT breakers, indicating lamps, push buttons , timers, controllers etc.

The Tray Dryer offered by us is used for diverse drying applications like food, electrodes, bakery, plastic & powders and drying of pigments. The Vacuum Tray Dryer is used in the industries like Pharmacy where drying and heating are the essential parts of the manufacturing process. Thermostatic inner chamber of the dryer is fabricated using Aluminium and stainless steel, which helps us maintain our position as the apex Pharmaceutical Tray Dryer Manufacturer in Ahmedabad, India. SALIENT FEATURES : All contact parts made of SS 316 as PGMP standard Available in wide range models from 6 to 192 raise capacity Design for uniform circulation of hot air in the drying chamber Heating cold and fan motor having electrical inter locking for safety of heating elements Electric/Steam/Thermic Fluid heating system Fresh air inlet and outlet air flow can be adjusted with damper control valve IQ/OQ/DQ documentation(OPTIONAL).

Salient Features   Available in standard and GMP model as per the customer’s requirements. Electric/ steam heating mode provided as required. The temperature is controlled by electronic Digital temp controller. Suitable for economical drying of powder, granules, food material & chemicals. Door is provided at the front side of the dryer lined with silicon rubber gasket to prevent leakages. Air circulation is done by particularly designed for the recirculation of blowers that are inside the dryer. Trolley trucks are used to load and unload the trays into the dryer

We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufacturing of tray dryer for chemicals plants machinery .This is a batch type Tray dryer suitable for small quantities wet material. It is either in MS or SS. Trays of SS or aluminum ranging from 12– 392 can be supplied according to customer’s requirement. The same is either provided with steam or electrical heating arrangement. Proper insulation is given to minimize heat losses. It has also auto start and cut off facility to maintain optimum temperature in the chamber. It has two to four fans according to trays capacity.

Tray Dryer is suitable for Pharmaceuticals, Food, Chemicals, Paints, Textiles & other industries. It is well accepted for economical drying of granules, powder, food material & chemicals. Construction Made out of rigid angle iron frame with double walled panels insulated with compressed fibre glass and with a rigid door fitted with strong hings and best choosen locking arrangement. A control panel is fixed  to facilitate the operation easily. Manufactured from mild steel & in good finishing outside with synthetic enamel colour & inside painted with heat resistant paint to resist temperature up to 300 degree, in Standard Model. Manufactured completely from SS304 or SS316 (As per customer requirement) in GMP Model & polished to the mirror finish from inside & matt finish from outside.   Air Circulation, Controlled Temperature & Time Highly effective with recirculating air. The heated air, is recirculated with fresh air in selected proportions for optimum drying of  the materials at the top & the bottom dry simultaneously. Uniform air circulation. Controlled temperature. Sturdy construction and large working space are the valuables of the oven Suitably designed to cover wide temperature range, Loading and unloading is faster and simple. In higher capacities trays trolley rolls in and out of the chamber. For continuous operation a spare trolley can be had for loading while the drying cycle is taking place. Digital temperature controller with digital timer are supplied to facilitate working day and night in electrically heated model. In steam & thermic fluid heated model, digital temperature indicator is provided with digital timer , but the temperature controller is not supplied with the machine.   Optional Flame proof fittings and motor. S.S.304 / S.S. 316 Trays.

Available in different sizes start from 150 mm dia to 600 dia in different length and different construction of material like, M.S / S.S etc. These could be used either horizontally or up to an inclination of 45 degree or so.  

We are offering tray dryer. This is a batch type tray dryer suitable for small quantities wet material. It is either in ms or ss. Trays of ss or aluminum ranging from 12– 392 can be supplied according to customer’s requirement. The same is either provided with steam or electrical heating arrangement. Proper insulation is given to minimize heat losses. It has also auto start and cut off facility to maintain optimum temperature in the chamber. It has two to four fans according to trays capacity.

We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufucturing of Tray Dryer to Chemical Plants the Material. This is a batch type Tray dryer suitable for small quantities wet material. It is either in MS or SS. Trays of SS or aluminum ranging from 12– 392 can be supplied according to customer’s requirement. The same is either provided with steam or electrical heating arrangement. Proper insulation is given to minimize heat losses. It has also auto start and cut off facility to maintain optimum temperature in the chamber. It has two to four fans according to trays capacity.

We have carved our position amongst reliable manufacturers, exporters and suppliers of huge collection of Tray Dryer's. Our company is reputed and accepted as most efficient Tray Dryer's across the bulk drug industry. Our products are developed with rigid angle frame and double walled panels under the vigilance or our quality controllers using high grade quality raw material that is source from trustworthy vendors of the market. We are one of the pioneer Pharmaceutical Machinery Manufacturers from India, We manufacture several types of Dryers, one of them is Tray Dryer, Tray dryer can be electrically heated, and Steam heated. Tray Dryer comes in 4 trays, 24 trays, 48 trays, 96 trays and 200 trays. Trey Dryer's as an aluminiums perforated trey.The construction of the machine varies as per requirement of the customer, it can be inside outside MS or GMP model depending upon the product and industry requirement. Tray Dryer is the most conventional Dryer used very widely and still being used where the moisture content is more and where the product has to be dried at low temperature for long hours.

The highly effective-circulating system is provided. Uniform design, controlled temperature, sturdy construction & large working space. All contact parts are SS 316/316L. and non-contact parts are S.S. 304.  Process timer with the digital control panel. Flameproof design and motor with FLP control Panel(optional). Digital temperature controller. Aluminum/polypropylene/Frp/M.S. galvanized trays available on demand. Steam radiator/Steam accessories available on demand in compliance with cGMP.