Digital Analyzers Dealers in Bangalore

MAC's PDH optical range of products multiplexes basic 2Mbps streams into 8/34/140 Mbps PDH streams as per a relevant ITU-T (G.703, G.742, G.751) recommendations. The multiplexed aggregate signal is converted into an optical signal at 1310 nm to be transmitted through a single mode optical fiber cable. The equipment configuration permits availability of stand- alone electrical multiplexers, optical line terminal equipments or regenerators. Large numbers of these equipments are deployed in Indian Department of Telecom network and also in other service providers.

The Transmission Line Analyzer from Taurus, creates a new platform for transmission line maintenance. This revolutionary new future-proof platform significantly minimizes the downtime and overall line maintenance time. ACCUMAX is a third generation; one of its kind products which works on the principle of multiple pulse & echo correlation technology using advanced matrix processors. The system offers cost effective monitoring of AC overhead transmission circuits on any de - energized line from 66kV to 1250kV. ACCUMAX being an auto-calibrated portable system is useful in monitoring & analysis of critical line condition and performance parameters which includes all type of Faults. Line Healthiness and Line Component data is analyzed to optimize asset utilization and to improve system reliability and quality of supply. Features 1. Overhead Transmission Line Analyzer 2. Qualified with MIL standards 3. Line Healthiness Monitoring System 4. Offline Fault Location & Line Analysis in a single unit 5. Commissioning of new overhead Transmission lines & Maintenance of existing lines 6. An advanced tool for the Predictive Maintenance

CVM Power analyzersNowadays, companies, industries or any consumer of electrical energy are trying to optimise costs to become the most competitive players in the market. We can act over a large number of parameters to save on costs, such as on the consumption of electrical energy. CIRCUTOR's analyzers offer state-of- the-art technology, measuring a large variety  of  electrical  parameters, with the main purpose of controlling and managing an installation, machine, industry, etc. thus optimizing the energy costs.   DefinitionThe CVM series of analyzers includes highly accurate metering stations that are aimed at the control and supervision of the main electrical parameters in three or four-wire, low and high volt- age, single and/or three-phase grids. In addition, they offer the most innovative technologies and offer metering in true root mean square. Its indirect current outputs use ITF technologies in the .../5 A secondary or .../1 A secondary: galvanic insulation protection inputs inductive and reactive capacitive energy, for each rate programmed (depending on the type).They incorporate the maximeter function, calculating the demand integrated in a programmable period (depending on the type). The integration is carried out with a sliding window and it can be carried out over the following adjustable parameters: three-phase current, active three-phase power, apparent three- phase power or current per phase.What functions do CIRCUTOR's analyzers offer? They display and transmit all electrical parameters metered and/or calculated. They incorporate the metering function, storing in the memory the value of energy consumed and generated, even in the absence of an auxiliary power supply. Hourly discriminator with previous programming mode, thus obtaining a totalizer of active,apparent, reactive. Some  of CIRCUTOR's  analyzers can be expanded or offer modular capabilities, with additional functions that can be associated to any electrical parameter monitored or calculated, such as: Multi-converter functions: analogue inputs and output. Alarm station or impulse generation function: digital inputs and outputs. The communications outputs, connection topologies and network protocols can be of different types. Connections : Ethernet, RS-232, RS-485, Radio Protocols: Modbus TCP, Modbus RTU, Profibus DP, Metasys N2 and XML. Integration systems  (Modbus  RTU vs. Modbus TCP)Until now, CIRCUTOR offered and is currently offering Ethernet communication gateways, (Modbus RUT), (TCP2RS code M54031), used for the integration of RS-485 equipment, making use of the Ethernet infrastructures existing in installations. Said gateways were designed for the communication with market SCADAs that did not have the possibility of establishing IP ad- dressing communications, since this was through a virtual port redirectioning software. Another problem with this type of communications was that it was a mono-master system, i.e., communications could only be established with slave equipment, with a single master or control PC. Communications could not be established with other equipment that was not established as a slave.Fortunately, PLC data acquisition systems  and  other  market  masters,  as well as the slaves commonly installed in these cases (three-phase power quality analyzers) have been unified under a standardized protocol that is very popular among manufacturers: Industrial Ether- net or Modbus/TCP.The implementation of this system has led to the standardization of the protocol so that any slave can be queried by various masters at the same time (up to eight), thus multiplying the different and diverse communication topologies in an energy control installation or in any process control situation (multimaster cases).Therefore, CIRCUTOR has launched its range of Ethernet analyzers again, implementing the new protocol with the main purpose of stand- ardising the communication methods used by most of the global manufacturers. CVMk2-ITF + k2-EXP-SD-MODBUS/ TCP: Power Quality AnalyzerM54400 / M54402 + Ethernet expanding module (Modbus/TCP) M54504 CVM144-ITF-Ethernet-TCP: Power Quality Analyzer (Modbus/TCP): M50790 CVM96-IT-Ethernet-TCP: Power Quality Analyzer (Modbus/TCP): M51241 TCP2RS: Converter RS232-RS485 / Ethernet (Modbus/TCP): M54032 LM50-TCP: Alarm / Impulse Centraizer (Modbus/TCP): M54032 With this type of analyzers, the integration of CIRCUTOR's units with any market SCADA, PLC or control master is easier and simpler than ever. ENERGY MANAGEMENT SOFTWARE: Power Studio Scada Toph-performance management software designed for the analysis of the consumption of energy and other parameters metered by CIRCUTOR's equipment.What can this software be used for? Control of the energy in an installation, analyzing the status of its lines and installations in real time. Simulation of receipts, depending on the version. It can be used to analyse the consumption of energy in the installations with the equipment supplied by CIRCUTOR and it also enables the simulation of bills, defining different rates, whether they are regulated or not. Study of the evolution of electrical parameters  in time, such as: V, A, kW, etc, with graphs and tables. Data and graphs can be exported to draw up reports. Different analyzers can be used to analyse and study the quality parameters defined by the IEC 61000-4-30 Standard.

We are offering Power Analyzer.Our clients can avail from us Power Analyzer (M85010) which is highly efficient and widely demanded in the electrical industry. It is available with us at market leading prices.

Vibration analyzer is a high performance, full-featured FFT data collector, signal analyzer and balancer which allow easy condition monitoring of equipment found in many industries such as power generation, petrochemical, pulp and paper. Vibration analyzer collects field data in-cluding vibration information, bearing condition, inspection and process data. Extensive analysis functions facilitate data analysis and condition diagnostics on site

High end model with world-class accuracy and stability Simultaneous measurement of voltage, current, power & harmonic High speed data updating Vivid waveform and vector display Three phase and harmonic measurement Compaq design

Introducing the new Vitrek PA900 Precision Harmonic Power Analyzer, a refreshingly easy-to-use high performance power analyzer that won’t break your budget. The PA900 delivers multi-channel, high-accuracy, wideband performance – to tackle the toughest energy measurement applications. Trust Vitrek to deliver world class power measurement capability at a price that is surprisingly affordable. Description World Class Accuracy & Bandwidth Easy-to-Use Touchscreen Operation All the Data you need at a Price you can Afford

We are renowned as one of the famous Pattern Generator Logic Analyser Manufacturers and Suppliers, based in India. The Pattern Generator Logic Analyser, we provide, is RISC Microcontroller based and thus is high in demand in the industry. Furthermore, our Pattern Generator Logic Analyser is not only efficient in performance but also cost effective in nature. Key Features 16 Bit independent pattern generator output.Built in 12C & SPI protocol analyzer.High speed USB connectivity.32 channel independent input logic analysis at 200 M Sa/Sec.50 MHz external clock state analyzer.265K samples high speed low voltage memory.Easy to use windows PC software.High speed pattern generation in terms of Micro Sec/Nano sec.Dedicated trigger out facility to connect to external logic Analyzer/Oscilloscope.About 256 Different patterns of 16 bit width can be downloaded and clocked from nano secs to secs.

We are offering high profile power analyser. The instrument offers versatile and unmatched features and functions to monitor, profile,record events, control,data logging, protect and even check the quality of an electrical system.

Applications:IndustrialMonitoring blue light radiation hazards in welding.UV sterilizationGraphic arts.Photochemical matching.UV EPROM erasure.Photoresist exposure.Curing of inks, adhesives and coatings.LaboratoryWeathering " degradation studies."UV sterilizationVirology.Microbial genetics.DNA research. Biologic hoods.General laboratory use. Features    Professional, high quality UV meter.    Ultra-violet irradiation measurement for UVA & UVB.    UV detector spectrum from 290 nm to 390 nm.    Hi, Lo measurement range. 19990 and 1999 uW/cm^2.    Exclusive UV sensor structure.    Sensor with cosine correction filter.    Build Zero button.    Microprocessor circuit provides high reliability and durability.    Separate UV LIGHT probe allows user to measure the UV light at an optimum position.    LCD display, easy readout.    Heavy duty & compact housing case.

Measured elements: ash content, moisture, volatiles Samples: inorganic, organic, synthetic Applications: coal, coke, food, limestone, plastics Furnace: resistance heated ceramic furnace, programmable in 1 °C steps from 50 °C up to 1000 °C Detection method: balance Max. number of samples: 19 crucibles + 1 reference crucible

Wide application partial discharge test system for Testing Power Cable, Transformer, Rotating Machines. Narrow and Broad band selection, Qmax, PPS etc. Digital Sampling , Free selection of frequency band, Identification of PD source, Pulse Polarity are unque features.  

Designed to detect a specific impurity in a binary gas mixture, the 212R is also well suited for monitoring one component in more complex mixtures where the other gases have the same ratio to each other or have similar thermal conductivity coefficients.  

Digital Controller DIN rail mounting.• Backlighted LCD display, 2 lines x 16 characters and 4 keys keypad, for an easy user interface;• 2 set-points with independent adjustment and free relay outputs, selectables in On-Off mode, Proportional or Time-Pause Mode;• 0/4-20 mA Proportional Output with selectable range;• PT100 temperature probe, Level and Flow sensor inputs;• Setting menu protected by password;• Fast setting by user menu selection, manual control of both relays (pumps priming), runtime monitoring of all outputs and control of the last probe calibration;• Realy n.2 selectable as setpoint or on each alarm signal.• Statistics of the alarms, of the number of setpoint activations and of the operating time of each relay;• Self-calibration of measure probes. ADIN20S pH-Rx • Controller for measurement and control of pH measure range 0.00-14.00 pH, with 0.01 pH accuracy, Redox potential, measure range -1500÷1500 mV, with 1 mV accuracy;• Changing of the monitored parameter by Advanced Settings Menu, protected by password. ADIN20S CHLORINE • Controller for measurement and regulation of free chlorine available for amperometric Pt- Cu probes;• Measure Range:0.00-10.00 ppm. ADIN20S CD • Controller for measurement and control of conductivity, available for conductivity probes with K=1, K=5 and K=10. ADIN20S CL-J • Controller for measurement and regulation of free chlorine and each other measure available for amperometric selective membrane 4-20mA probes;• Measure Range selectable: 0.00-2.00 ppm/0.00-5.00ppm/0.00-10.00ppm/0.00-20.00ppm/0-200ppm. Model CODE DESCRIPTION ADINS20PHRX AQUA DIN 20 START PH-RX CONTROLLER ADINS20CL AQUA DIN 20 START CHLORINE (PT-CU) CONTROLLER ADINS20CD AQUA DIN 20 START CONDUCTIVITY CONTROLLER ADINS20CLJ AQUA DIN 20 START PPM A-J PROBES

rohde & Schwarz is an independent group of companies specializing in electronics. It is a leading supplier of solutions in the fields of test and measurement, broadcasting, radio monitoring and radiolocation as well as mission-critical radio communications.